说明书.doc

汽车变速器上盖组合机床总体设计【全套CAD图纸和毕业答辩论文】

收藏

压缩包内文档预览:(预览前20页/共40页)
预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图
编号:10601054    类型:共享资源    大小:2.87MB    格式:ZIP    上传时间:2018-09-01 上传人:好资料QQ****51605 IP属地:江苏
50
积分
关 键 词:
汽车 变速器 组合 机床 总体 整体 设计 全套 cad 图纸 以及 毕业 答辩 论文
资源描述:

【温馨提示】 购买原稿文件请充值后自助下载。

以下预览截图到的都有源文件,图纸是CAD,文档是WORD,下载后即可获得。


预览截图请勿抄袭,原稿文件完整清晰,无水印,可编辑。

有疑问可以咨询QQ:414951605或1304139763

摘 要


组合机床是根据工件加工需要,以大量通用部件为基础,配以少量专用部件组成的一种高效专用机床。目前,组合机床主要用于平面加工和孔加工两类工序。由于组合机床进行加工能够进行多工位加工,提高自动化程度,缩短加工时间和辅助时间。而且组合机床大部分都是由通用部件组成,研制周期较短,便于设计,制造和使用维护,成本低。而且机床易于改造,产品和工艺变化时,通用部件还能重复利用,经济性较好。而且其生产效率高,加工精度稳定,自动化程度高,使工人劳动强度降低。所以组合机床在大批量生产中的应用十分广泛。

由于本次加工的零件为变速器箱体,为大批量生产,而且所要加工的孔较多,本次设计的组合机床主要就是对汽车变速器上盖的孔进行加工。

本次设计主要绘制组合机床的“三图一卡”,即被加工零件工序图,加工示意图,机床尺寸联系图。通过绘制三图一卡,选择机床的刀具,切削用量,夹具形式,配置形式,通用部件和专用部件等等。三图一卡是设计组合机床的重要组成部分。


关键词 组合机床;钻孔;三图一卡



   


Abstract

The assembly machine processes is according to the requirement of work pieces , and it is made of a lot of general use parts and a little exclusive use parts and it is a kind of a efficiently production machine. The present, assembly machine tool primarily is used in making the plane surface and the apertures.Because the assembly machine tool can process some parts together ,so it can boost to automate extent, and shorten the time of process,And that assembly machine tool is made of a lot of general use parts, short the time of design, and it is convenient for designing, fabrication , the cost is low. And the machine tool is apt to be reconstructed, When the technics route changes, the general parts can be reused again, so we use assemble machine tool is economical .And because of high production efficiency, the accuracy of process, the stability of it's result, the automation extent higher, and so it can debase the strength of the people.So large numbers of assembly machine tools are applied in the machine industrial.

Due to the processing of parts for transmission case, for mass production, but also need to machining hole is more, the design of modular machine tool is mainly for auto transmission cover hole processing.

This design mainly draw combination machine tools of figure 1 "Three figure one card", which is process diagram, processing parts processing schematic drawing, machine size connection diagram. By mapping the three card, select the machine tool cutter, cutting dosage, the fixture, the configuration form, the general parts and special parts, etc. Figure 1 Three figure one card are an important part of the design of modular machine tool.


Keywords  combination machine tools  Drilling  Three figure one card




目       录

摘 要 I

Abstract II

1 绪论 1

1.1问题的提出 1

1.2 国内外组合机床的现状及发展趋势 2

1.3机床在国民经济中的地位 3

1.4组合机床的组成、分类及特点 3

1.5 组合机床研究基本内容及关键技术 5

2 组合机床总体方案的制定 7

2.1 组合机床的工艺范围及工艺方案 7

2.1.1 组合机床工艺范围 7

2.1.2确定工艺方案的基本原则 7

2.1.3 确定工艺方案应注意的问题 8

2.1.4 组合机床工艺方案的拟定 9

2.2 组合机床的配置形式 10

3 被加工零件工序图 11

3.1被加工零件工序图的作用与内容 11

3.2被加工零件工序图的制定 12

4 加工示意图 14

4.1 加工示意图的作用和内容 14

4.2组合机床切削用量 14

4.2.1 确定切削用量应注意的问题 14

4.2.2 切削用量的计算 15

4.3刀具,工具,导向装置的选择 17

4.3.1刀具的选择 17

4.3.2接杆的选择 17

4.3.3导向套的选择 18

4.4初定主轴类型、尺寸和外伸长度 18

4.5动力部件的工作循环及工作行程的确定 19

5 机床联系尺寸图及生产率计算卡 22

5.1 机床动力部件的选择 22

5.1.1 动力箱的选择 22

5.1.2 动力滑台的选择及附属部件 23

5.2 确定机床尺寸 24

5.2.1 确定装料高度 25

5.2.2 中间底座轮廓尺寸 25

5.2.3 多轴箱轮廓尺寸 26

5.3 机床联系尺寸图的制定 27

5.3.1.画主视图 27

5.3.2.画左(右)视图 27

5.3.3在联系尺寸图上标注尺寸 27

5.4 机床生产率计算卡 28

5.4.1理想生产率 28

5.4.2实际生产率 28

5.4.3.机床负荷率 29

5.4.4生产率计算卡 30

结 论 32

致谢 33

参考文献 34





1 绪论

1.1问题的提出

组合机床是由大量标准化和系列化的通用部件为主要部件,根据特殊的加工需要,匹配少量的专用部件,对一种或者数种工件按事先确定的加工工序进行加工的效率很高而且运用比较灵活的专用化机床。

组合机床可以同时加工多根轴,多个面,多个工位,也可以完成钻、镗、车孔,还可以攻丝、铣削、断面等。随着组合机床技术的更新,组合机床可以完成的工艺也越来越多,比如可以完成焊接、进行热处理、实现自动测量还有自动装配以及清洗等加工工艺。机床可以实现辅助动作自动化,所以生产效率提高。 

在现代技术的制造中,组合机床被人们共同认为是现代制造技术的重要生产工具,组合机床在某种意义上标志着一个国家生产制造的水平。在国内外,组合机床已经发展成为一个新型的工业部门。由于技术经济和生产上的原因,早在50年代就已经迅速发展,并且存在专门从事经营此项业务的部门。从技术上来说,因为传统普通机床的精度很低,故而不能同时加工同一种零件,导致生产的效率很低。然而巨大的社会的生产力需要制造技术往高精度和高效率的方向发展,而组合机床满足了这种需要。组合机床是由大量标准化和系列化的通用部件为主要部件,根据特殊的加工需要,对一种或者若干种工件按原先确定的工序进行加工的机床。组合机床可以同时加工多根轴,多个面,多个工位。故而组合机床可以提高生产的效率,在保证了加工的质量的同时还减轻了人的劳动强度。


内容简介:
1附录 1 外文翻译基于事例推理的夹具设计研究与应用摘要:根据基于事例的设计方法,提出采用工序件的特征信息和夹具的结构特征信息来描述夹具的相似性,并建立了包括这 2 方面主要特征信息为基础的事例索引码,设计了事例库的结构形式,创建了层次化的事例组织方式;同时,提出了基于知识引导的夹具事例检索算法,以及事例的修改和采用同族事例码进行相似事例的存贮,形成了基于事例推理的夹具设计.所开发的原型系统在型号工程夹具设计等项目的设计过程中得到了应用,并取得了令人满意的使用效果.关键词: 基于事例的推理 夹具设计 CAD夹具是以确定工件安全定位准确为目的的装置,并在加工过程中保持工件与刀具或机床的位置一致不变。因为夹具的结构依赖于产品的特点和在企业规划中加工工序的地位,所以它的设计是制造过程中的瓶颈,制约着效率的提高. 夹具设计是一个复杂的过程,需要有从大量的设计论文中了解质量知识的经验,这些设计论文包括工件的结构设计、涉及加工工艺,和加工环境。当用这些擅长绘制详细设计图的传统的 CAD 工具(如 Unigraphics、CATIA、Pro/E) 时,这仍然是一项非常耗时的工作,但是利用以往的设计经验和资源也不能提供一些益处,而这正是提高效率的关键因素. 基于事例推理 (CBR) 的方法适应以往个案解决的办法,建立一个新问题的方法,主要有以下四步骤:检索、利用、修改,并保留.这是一个比用专业系统模仿人类思维有用的使用方法,因为提出一个类似的情况,和采用一些修改,似乎不言自明,而且比人类更直观.所以支持不同事例的设计工具已经在诸多领域中发展起来,如在注射成型及设计、建筑设计、模具设计投死, 规划过程中 ,还有夹具设计. 孙用六个数字组成代码参数,包括工件的形状、机械部分、轴衬,第一定位装置,第二定位装置和夹紧装置. 但这个系统不能用于除钻床夹具外的其他夹具类型,不能解决储存需要保留的同一参数代码的问题,这在 CBR 中是非常重要的.1 事例参数和事例图书馆的建立1.1 事例参数事例参数应该由工件的所有的特征组成,来区别不同的夹具. 使用他们能够使操作方便. 因为零件的形状是多种多样的, 在生产企业中制造的技术要求也不断发展,许多特征作被用做事例参数将会使搜索速度降低,其主要特征是不2重要的,因为分配给每个特征的比重必须减少. 另一方面,事例参数包含所有的特征是困难的。 因此,考虑到实际和快速设计的需求,事例参数要包含工件的主要特征和夹具的结构。事例参数代码由 16 位数组成:13 位数是事例特征 3 位数是事例识别数字。 前 13 位数代表 13 个特征。 每个数字与特征的一个属性相一致,这可能是“*“、 “?“、“1“、“2“,“A“、“B“, ,“Z“,等其中的一个。其中,“*“是指任何一个,“?“代表不确定,“0“代表没有。 系统规定:夹具的类型,工件的形状,位置模式不能是 “*“和“?“。在设计系统时,三个项目的属性信息没有这些选择,这就意味着必须选择确定的属性。最后三位数是事例识别号码,如果事例特征的 13 位数是一样的,这三个数字就用来区别他们。该系统还规定:“000“是用于修正的一个典型事例,其他事例“001“、“002“、,这些是用于设计师查找参考事例的. 如果其中一个偶尔需要改变成典型事例,首先它必须要求改成“000“,前面的自动变成参考事例. 事例索引码的结构如图 1 所示。1夹具类型; 6工件重量; 11夹紧模型;2工件形状; 7工件刚度; 12夹具体;3工件材料; 8加工内容; 13其他;4批 量; 9过程所有物; 14 到 16事例识别码;5工件比例; 10定位模型;图 1 事例索引码的结构1.2 事例库事例库由许多预定义的事例组成。事例的描述是基于事例推理的最重要的问题之一。所以由索引码复合。1.3 事例的层次化夹具的结构相似被认为是整个夹具,成分和内容相似。所以,整个夹具事例库,成分事例库,夹具的成分事例库形成相同。整个夹具的设计资料通常是由工件资料和工件加工资料组成,这就意味着夹具的设计应满足特别功能的需求.全部夹具事例是由功能成分组成,它是用功能成分的名字和数字来进行描3述的。成分事例代表成员(成分功能和其他结构成分,主要驱动参数,数字,和它们的约束关系) 。成分事例(夹具的最低层)是功能成分和和其他成分的结构。在现代夹具设计中有很多参数化准件和普通非标准件。所以成分事例图书馆应记录特殊参数和保持它们的方法。2 事例修改的策略在基于事例的夹具设计中,最重要的是相似点的修改,这样能有助于获得最相似的事例,以及缩短适应时间。根据夹具设计的需求,事例修改的策略使最接近的事例方法和知识指导结合起来。首先在深度上查找,然后在宽度上;知识指导策略意味着在来自客观事物根源的知识规则上查找,这就要首先查找固定类型,然后查找工件的形状,第三查找定位方法。例如,如果事例索引码包括夹具类型的磨削夹具,就只查找所有的磨削夹具,然后查找工件形状的盒子,第三查找一个平面两个销的定位方法。如果没有合适的,就查找深度标点,然后回到最上层,然后再找所有与宽度相关的事例。修改方法:1) 根据夹具事例库的事例索引信息,查找有关事例库。2) 将事例索引码与事例库的每个事例码匹配,然后计算相似尺寸的价值。3) 整理相似尺寸的次序,最大的架子是最类似的事例。两个事例之间的相似点是基于两个事例特征之间的相似点。相似点尺寸的计算依靠特征的类型。相似点的价值可以通过数字化的价值来计算,例如比较重量分别是 50kg 和 20kg 的工件。非数字化的价值也能计算,例如,现在前13 位索引码都是非数字化的价值。一个夹具的相似尺寸的计算公式如下:其中 S 表示通用夹具的相似尺寸,n 表示索引特性数, 表示每个特性的重量,表示事例库中特性 和相关夹具的特性 的相似尺寸。同时,数值计算如下:4其中 表示第 i 个特征的索引特性值, 表示事例库中第 j 个事例的第 i 个特征的特性值。所以有两种方法选择相似夹具。一个方法是建立数值。如果通用事例的相似尺寸值比给定的数值小,这些事例就不能选来作相似事例。事例库最初建立的时候,只有一些事例,数值可以建小一点。如果有大量的相似事例,数值就应该建的大一些。另外一个方法是只建立相似事例的数字(例如 10) ,这是类型单里相似尺寸的最大值。3 事例的修改和存储3.1 事例的修改夹具设计中相似事例的修改包括以下三个阶段:1) 成分的替代2) 保持形式不变,调整成分的特性3) 模型重新设计如果夹具的成分是普通的物品,它们能通过使用工具被修改,代替以及删除,这些已经被设计好了。3.2 事例的存储在将一个新的事例保存到事例库之前,设计者必须考虑保存是否有价值。如果这个事例不能增加系统的知识,就没有必要把它保存到事例库里。如果它有价值的话,设计者在保存之前必须分析一下,看看这个事例是否作为标准事例或参考事例被存储了。一个标准事例是一个描述同族事例主要特征的标准。一个同族事例是有事例库中索引码前 13 位相同而最后三位不同的那些事例组成的。一个标准事例的最后三位通常是“000” 。一个参考事例属于同族标准事例,最后三位用不同数字区分。5从被解释的概念中,可采用以下方法:1)如果一个新的事例和任何一个存在的事例族一致,和一个存在的标准事例的前 13 位数相同,那么这个事例就不能存储因为已经这种标准事例了。或者只能作为一个参考事例保存(最后三位不是“000” ,而且和其它的不一样)在事例库中。2)如果一个新的事例和任何一个存在的事例族一致,并且被认为代替这个事例族要比以前的标准事例好,那么这个标准事例就被这个新的事例代替,以前的标准事例作为一个参考事例保存。3)如果一个新的事例和任何一个存在的事例族不一致,一个新的事例族将会自动产生,并作为标准事例保存到事例库中。4 夹具设计中基于事例推理的过程根据夹具设计的特性,夹具设计的基本信息,例如夹具的名字,零件,生产和设计者等等,必须先输入。然后,输入或设计工件的模型。输入有关工件的细节信息,建立事例索引码,然后 CBR 开始依靠相似尺寸查找相似事例,选出最相似的事例。如果需要的话,事例要满足通用性设计,再存储到事例库中。程序流程图如图 2 所示图 2 基于事例推理的夹具设计流程图5 基于事例推理的夹具设计说明6这是一个工件如图 3 所示。材料是 45 钢,底座,形状为块状,生产批量为中批等。需要设计成一个用来旋转孔的旋转夹具。图 3 需要设计夹具的一个工件(最大尺寸 80mmx49mmx22mm)工件的特征值,属性值,事例索引码和重量在表 1 中列出。表 1 工件的事例索引码和重量特征名称 特性值 索引码 重量夹具类型 车床夹具 1 100工件形状 块状 9 90工件材料 中碳钢 3 70批量 中批 2 60工件比例 小 5 60工件重量 轻 5 60工件刚度 硬度强 1 60加工内容 孔 3 80程序要求 完成加工 3 70定位方法 三个平面 1 100夹紧方法 不确定 ? 90夹具体 复合 4 80其他 没有 0 60通过查找和计算相似点,最相似的事例的事例索引码是719325513321402000,细节信息在表 2 中列出。表 2 最相似事例的事例索引码特征名称 特性值 索引码夹具类型 车床夹具 1 工件形状 块状 9 工件材料 中碳钢 3 批量 中批 2 工件比例 小 5 工件重量 轻 5 工件刚度 硬度强 1 加工内容 孔 3 程序要求 完成加工 3 定位方法 三个平面 1 夹紧方法 不确定 ? 夹具体 复合 4 其他 没有 0 相似点的计算如下:所以夹具的相似尺寸值是 0.806,这是在事例库中用于设计的最相似的事例,最相似的事例的结构如图 4 所示8图 4 最相似的夹具当成分替代,修改定位模型和夹紧模型,以及调节相关尺寸之后,新的夹具被设计出来,图形如图 6 所示图 5 需要设计的新夹具因为在事例库中没有相似夹具,新夹具被储存到事例库中。事例索引码是19325523311402000。6 结论基于事例推理,作为一个问题解决的方法,是一个比模仿人类思想的专业系统更有效的方法,已经在很多难获取知识的领域里得到发展。基于事例推理的优点如下:它和人类的思想很相似;一个事例库通过保存新事例获得自学能力,它比有惯例库更快更容易,它可以更好的传递和解释新的知识,这和惯例9库有很大的不同。基于事例推理中提出的一个夹具设计的框架已经被实行了,使用的是支持基础数据的 VC+,UG 电脑绘图软件。这个框架也已经和普通成分库和典型夹具库结合起来。这个发展的标准系统,用于航空项目,帮助夹具设计者提高设计效率和重新使用先前的设计资源。1ApplicationanddevelopmentO fO O O casebasedreasoninginfixturedesignAbstract:Basedonthecasebaseddesigning (CBD) m ethodology, thefixturesim ilarity isintworespects: thefunctionandthestructureinform ation.Then, thecom puter aidedfixturedesignsystem is created on case basedreasoning(CBR),inwhichtheattributesof them ain featuresof workpieceandstructureof fixtureascaseindexcodeare designedfor the retrieve of thesim ilar cases, and the structure andhierarchical relationof caselibraryareset up for store. Meanwhile, thealgorithm based on the knowledgeguidedinthe retrieve of the sim ilarcases, thestrategyof caseadapt at ionandcasestorageinwhichthecaseidentifcat ionnum ber isusedtodistinguishfrom sim ilar cases arepresented. Theapplication of the system in som eprojectsim proves thedesignefficiencyandgetsagoodresult.K eywords:K K K case basedreasoning ;fixture design; com puteraideddesign(CAD)Fixturesaredevicesthat serveasthepurposeofholdingtheworkpiecesecurely and accurately, andm aintaining a consistent relationshipwith respect to the tools whilem achining. Because the fixturestructuredependsonthefeatureof theproduct andthestatus of theprocessplanningintheenterprise, itsdesignisthe bottleneck during m anufacturing,which restrains to im prove theefficiency and leadtim e. And fixture2designisacom plicated process, basedon experience that needscom prehensive qualitative knowledgeabout a num ber of design issuesincluding workpiece configuration,m anufacturing processesinvolved, andm achining environm ent. Thisisalsoaverytim e consum ing workwhenusingtraditional CAD tools (such asUnigraphics, CATIAor Pro/E), whicharegoodat perform ing detaileddesigntasks, but provide fewbenefits fortakingadvantageofthepreviousdesignexperience andresources, which arepreciselythekeyfactorsinim provingtheefficiency. Them ethodology ofcasebased reasoning (CBR) adapts thesolutionof apreviouslysolvedcasetobuildasolutionforanewproblem withthefollowingfoursteps: retrieve, reuse,revise, andretain1. This is am oreuseful m ethod thantheuseofanexpertsystem to sim ulate hum an thoughtbecauseproposingasim ilar caseandapplyingafewm odifications seem s tobeself explanatoryandm ore intuitiveto hum ans .So various case baseddesign support tools have beendeveloped for num erous areas2-4,suchasininjectionm olding anddesign,architectural design, die casting diedesign, process planning, andalsoinfixturedesign. Sunusedsixdigitalstocom pose theindexcodethat includedworkpiece shape, m achine portion,bushing, the1st locatingdevice, the2ndlocatingdeviceandclam ping device5.But thesystem cannot beusedforotherfixturetypes except for drill fixtures,andcannot solvetheproblem ofstorageofthesam e indexcodethat needstoberetained, whichis veryim portant inCBR6.1ConstructionofaCaseIndexand3CaseLibrary1.1CaseindexThe case index should becom posed of all features of theworkpiece, which are distinguishedfrom different fixtures. Usingall ofthem would m ake the operation inconvenient. Becausetheform s of theparts arediverse, andthetechnologyrequirem ents of m anufacture in theenterprise also develop continuously,lotsof featuresusedasthecaseindexwill m ake thesearchrateslow, andthem ain feature unim portant, for thereasonthat therelativeweight whichisallottedtoeveryfeaturem ust dim inish.Andontheother hand, it is hardtoinclude all the features in the caseindex.Therefore, considering thepracticalityandthe dem and of rapiddesign, thecaseindexincludesboththem ajor featureof theworkpieceandthestructureoffixture. Thecaseindexcodeis m ade upof 16digits: 13digitsforcase features and 3 digits for caseidentificationnum ber.The first 13digits represent 13features. Eachdigit iscorrespondingtoanattributeof thefeature, whichm aybeoneof“*”,“?”,“1”,“2”,“A”,“B”,“Z”, etc. Inwhich,“*”m eans anyone,“?”uncertain,“0”nothing.The system rules: fixture type,workpieceshape, locatingm odel cannotbe“*”or“?”. Whenthesystem isdesigned, the attribute inform ation ofthe three item s does not have theseoptions, which m eans the certainattributem ust beselected.Thelast threedigits arethecaseidentificationnum ber, whichm eans the13digits of the casefeaturearethe4sam e, andthenum ber of thesethreedigitsisusedfordistinguishingthem .Thesystem alsorules:“000”isaprototype case, which is used forretrieval, andothercasesare“001”,“002”, whichareusedforreference cases to be searched bydesigners. If occasionallyoneof themneeds tobechangedas theprototypecase, first it m ust berequiredtoapplytochangetheoneto“000”, andtheform er is changedtoreferential caseautom atically.TheconstructionofthecaseindexcodeisshowninFig.1.1.2CaselibraryThecaselibraryconsistsoflotsofpredefinedcases. Caserepresentationisoneofthem ost im portant issuesincasebasedreasoning. Socom pounding withtheindexcode,.1.3Hierarchicalform ofCaseThe structure sim ilarity of thefixture is represented as the wholefixturesim ilarity, com ponents sim ilarityandcom ponent sim ilarity. Sothewholefixture case library, com ponents caselibrary, com ponent case library offixture are form ed correspondingly.Usually design inform ation of thewholefixtureiscom posed ofworkpieceinform ation andworkpiece procedureinform ation, whichrepresent thefixturesatisfying the specifically designingfunction dem and. The whole fixturecaseism ade upoffunctioncom ponents,whichare describedbythe functioncom ponents nam es andnum bers. Thecom ponents case represents them em bers. (function com ponent and5other structure com ponents,m aindrivenparam eter, thenum ber, andtheirconstrainrelations.) Thecom ponentcase(thelowest layer of thefixture) isthestructureoffunctioncom ponent andother com ponents. In the m odernfixture design there are lots ofparam etric standardpartsandcom m onnonstandardparts. Sothecom ponentcase library should record thespecificationparam eter andthewayinwhichitkeepsthem .2StrategyofCaseRetrievalIn the case based design offixtures,them ost im portant thingistheretrieval of the sim ilarity, whichcanhelptoobtainthem ost sim ilar case, andtocut downthe tim e of adaptation.Accordingtotherequirem ent offixturedesign, the strategyof case retrievalcom bines the way of the nearestneighborandknowledgeguided.Thatis,first searchondepth, thenonbreadth;theknowledgeguidedstrategym eans tosearchontheknowledgerulefrom roottotheobject, whichisfirstlysearchedbythefixturetype, thenbytheshapeoftheworkpiece, thirdlybythelocatingm ethod. Forexam ple, if thecaseindexcode includes the m illing fixture offixturetype, thesearchis just for allm illing fixtures, then for box ofworkpieceshape, thethirdfor 1plane+2pineoflocatingm ethod. Ifthereisnom atch of it, thenthesearchstops ondepth, andreturns totheupper layer,andretrieves all therelativecases onbreadth.Retrievalalgorithm s:1)According to the case indexinform ation of fixture case library,searchtherelevantcaselibrary;2)Matchthecaseindexcodewiththecodeofeachcaseofthecaselibrary,6andcalculatethevalueofthesim ilaritym easure;3)Sort the order of sim ilaritym easure, thebiggest value, whichisthem ost analogicalcase.Sim ilarity betweentwocases isbasedonthesim ilarity betweenthetwocases. features. The calculation ofsim ilarity m easure dependsonthetypeof thefeature. Thevalueof sim ilaritycanbecalculatedfor num erical values,for exam ple, com pareWorkpiece withtheweight of50kgand20kg. Thevaluecanalsobe calculatedbetween nonnum erical values, forexam ple, nowthefirst 13digits indexcode is all nonnum erical values. The sim ilaritym easure of afixtureis calculatedasfollows:whereSisthesim ilarity m easureofcurrent fixture, nisthenum ber oftheindexfeature, istheweight ofeachfeature, isthesim ilaritym easure oftheattribute ofthei2thfeaturewiththeattribute of relativefeature of the j-thcase inthe caselibrary. At the sam e tim e, thevaluecountsasfollows:. Where isthevalueoftheindexattributeofthei-thfeature, and is7thevalueofattributeoftherelativei-thfeatureofthej-thcaseincaselibrary.Sotherearetwom ethods toselecttheanalogical fixture. Oneistoset thevalue. If the values of sim ilaritym easure ofcurrent caseswerelessthanagivenvalue, thosecaseswouldnot beselectedasanalogical cases. Whenthecaselibraryisinitiallyset up, andthereareonlyafewcases, thevaluecanbeset sm aller. If there are lots ofanalogical cases, thevalueshouldgetlarger. The other is just to set thenum ber of theanalogical cases (suchas10), whichis the largest value ofsim ilarity m easure from the sortedorder.3 Case adaptation and CaseStorage3.1CaseadaptationThe m odification of theanalogical case inthe fixture designincludesthefollowingthreecases:1)Thesubstitutionof com ponentsandthecom ponent;2) Adjusting the dim ension ofcom ponents andthecom ponent whiletheform rem ains;3)Theredesignofthem odel.If thecom ponents andcom ponentofthefixturearecom m on objects, theycanbeedited, substitutedanddeletedwithtools, whichhavebeendesigned.3.2CasestorageBeforesavinganewfixturecaseinthe case library, the designer m ustconsiderwhetherthesavingisvaluable.If the case does not increase theknowledge of the system , it is notnecessarytostoreit inthecaselibrary.Ifit isvaluable, thenthedesignerm ustanalyze it before saving it to seewhether the case is stored as aprototypecaseor asreferencecase. A8prototypecaseis arepresentationthatcandescribethem ain featuresofacasefam ily. Acasefam ily consistsof thosecaseswhoseindexcodeshavethesam efirst 13digits anddifferent last threedigitsinthecaselibrary. Thelast threedigits of aprototypecasearealways“000”.Areferencecasebelongstothesam e fam ily astheprototypecaseandis distinguishedbythe different lastthreedigits.From the concept that has beenexplained, thefollowingstrategies areadopted:1) If a newcase m atches anyexistingcasefam ily, it has the sam efirst 13digitsasanexistingprototypecase, sothecaseisnot savedbecauseitis representedwell bythe prototypecase. Or is just savedas areferencecase(thelast 3digitsarenot“000”,andnot thesam e withothers) inthecaselibrary.2) If a newcase m atches anyexistingcasefam ily andisthought tobe better at representing this casefam ily thanthepreviousprototypecase,thentheprototypecaseissubstitutedbythis newcase, and the previousprototypecaseissavedasareferencecase.3) If anewcasedoes not m atchanyexistingcasefam ily, anewcasefam ily will begeneratedautom aticallyandthecaseisstoredastheprototypecaseinthecaselibrary.4 Process of CBRin FixtureDesignAccordingtothecharacteristicsoffixturedesign, thebasicinform ation ofthefixturedesignsuchasthenam e offixture, part, product andthedesigner,etc. m ust beinput first. Thenthefixturefileisset upautom atically, inwhichall9com ponents of the fixture are puttogether. Then the m odel of theworkpiece is input or designed. Thedetailed inform ation about theworkpieceisinput, thecaseindexcodeisset up, andthentheCBRbeginstosearchtheanalogical cases, relyingonthe sim ilarity m easure, andthe m ostanalogical case is selected out. Ifneeded, thecaseis adaptedtosatisfythecurrent design, andrestoredintothecase library. The flowchart of theprocessisshowninFig.3.5IllustratingforFixtureDesignbyCBRThisisaworkpiece(seeFig.4). Itsm aterial is45#steel. Itsnam e isseat.Itsshapeisblock, andtheproduct batchsizeism iddle, etc. Afixtureisturningfixture that serves toturnthe hole,whichneed
温馨提示:
1: 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
提示  人人文库网所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
关于本文
本文标题:汽车变速器上盖组合机床总体设计【全套CAD图纸和毕业答辩论文】
链接地址:https://www.renrendoc.com/p-10601054.html

官方联系方式

2:不支持迅雷下载,请使用浏览器下载   
3:不支持QQ浏览器下载,请用其他浏览器   
4:下载后的文档和图纸-无水印   
5:文档经过压缩,下载后原文更清晰   
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

网站客服QQ:2881952447     

copyright@ 2020-2024  renrendoc.com 人人文库版权所有   联系电话:400-852-1180

备案号:蜀ICP备2022000484号-2       经营许可证: 川B2-20220663       公网安备川公网安备: 51019002004831号

本站为文档C2C交易模式,即用户上传的文档直接被用户下载,本站只是中间服务平台,本站所有文档下载所得的收益归上传人(含作者)所有。人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私,请立即通知人人文库网,我们立即给予删除!