2010-2011学年春季《热学》习题4(答案).doc_第1页
2010-2011学年春季《热学》习题4(答案).doc_第2页
2010-2011学年春季《热学》习题4(答案).doc_第3页
2010-2011学年春季《热学》习题4(答案).doc_第4页
全文预览已结束

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

2010-2011春 热学习题第三章 输运现象与分子动理学理论的非平衡态理论习题四:1. 氧气在标准状态下的扩散系数: 求氧分子的平均自由程。解:2. 已知氦气和氩气的原子量分别为4和40,它们在标准状态嗲的沾滞系数分别为 和 ,求:(1)氩分子与氦分子的碰撞截面之比 ;(2)氩气与氦气的导热系数之比 ;(3)氩气与氦气的扩散系数之比 。解:已知 (1)根据 , 得出 由此 (2)根据 由于氮氩都是单原子分子,因而摩尔热容相同 (3) 现P、T都相同,3. 两个长为100cm,半径分别为10.0cm和10.5cm的共轴圆筒套在一起,其间充满氢气,若氢气的沾滞系数为 ,问外筒的转速多大时才能使不动的内筒受到107dyn的作用力?(1dyn=10-5N)解:根据公式,其中则4. 两个长圆筒共轴套在一起,两筒的长度均为L,内筒和外筒的半径分别为 和 ,内筒和外筒分别保持在恒定的温度 和 ,且 ,已知两筒间空气的导热系数为,试证明:每秒由内筒通过空气传到外筒的热量为: 证明:由付里叶定律:则在单位时间内通过以r为半径的柱面的热量为: 由于 且 、 是恒量故由 面传到 面的热量也是一恒量,故上式两端积分得:5. 将一圆柱沿轴悬挂在金属丝上,在圆柱体外面套上一个共轴的圆筒,两者之间充以空气。当圆筒以一定的角速度转动时,由于空气的沾滞作用,圆柱体将受到一个力距 . 由悬丝的扭转程度可测定此力距,从而求出空气的沾滞系数。设圆柱体的半径为R,圆筒的半径为 ,两者的长度均为L,圆筒的角速度为 ,试证明: , 是待测的沾滞系数。证明:气体与圆柱相互作用的沾滞力为: 只考虑平衡时的情况,可以近似地认为圆柱体不动,圆筒的转速为: 设紧靠圆筒的那些分子流速与圆筒转动速度相同 因为 由牛顿沾滞定律知,圆柱体所受沾滞力 圆柱体侧面积 6. Water flows through a fire hose of diameter 6.35cm at a rate of 0.012 m3/s. The fire hose ends in a nozzle with an inner diameter of 2.20cm. What is the speed at which the water exits the nozzle?【answer】the volume flow rate in unit time remains unchanged, so7. The effective diameter of nitrogen molecule is, to calculate the mean free path of nitrogen molecule at standard conditions (1atm, 0oC)and the mean collision time for continual two times. 解: 代入数据得: 8. The effective diameter of oxygen molecule is , to calculate the collision frequency of oxygen molecules, respectively when (a) the temperature of oxygen is 300K, and the pressure is 1.0atm. (b) The temperature of oxygen is 300K, and the pressure is atm. 解:由 代入数据得: 9. The mean free path of some kind of gas molecule is when the temperature is 25, (a) to calculate gas pressure when the effective diameter of gas molecule is . (b) To calculate the collision times with other gas molecules in 1m distance. 解:(1)由 得: 代入数据得: (2)分子走 路程碰撞次数(次)10. Oil at 20oC ( and is flowing steadily through a 30m long cylinder pipe with a diameter of a 5cm. During the flow, the pressure at the pipe inlet and exit are measured to be 823 KPa nd 96 KPa, respectively. Determine the flow rate of oil through the pipe assuming the pipe is (1) horizontal, (2) inclined 15o upward, (3) inclined 15o downward. Also verify that the flow through the pipe is laminar. 解:The flow rate o

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论