防静电设施的检测施工及维护要求

1、HBusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page1of10Allrightsreservedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!SignatureApprovalandRevisionHistoryR

2、ev.DateChangeRequestNo.DescriptionofchangePreparedByReviewedByApprovedByTheMaster,ControlledCopy,ofthisdocumentislocatedonNetworkDrive:Sec_pse_fileiso9001_BCELPrintedcopiesofthisdocumentareUncontrolled,unlessmarkedwiththeControlledStamped!DocumentControlStampPreparedByReviewedByApprovedByEffectiveDa

3、te:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00All rights reserved and company restricted. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Philips Lighting ElectronicBuilding-1,889 Yishan Road, Shanghai China 200233Page

4、2 of 10Business Centre ElectronicsBusiness Excellence thru Speed and Teamwork!.目的：为了使公司内的防静电设施能按标准要求施工；定期检测及及时维修特制定本规则。.范围：本规则适用于所有防静电设施。包括防静电接地系统；防静电地面或地垫；工作台及工作椅；工作服及工作帽；工位器具及物流系统；腕（脚跟）带系统电阻及环境等。本规则适用于所有从事防静电设施的施工、维护、检测的人员.定义：系统接地电阻：在防静电接地系统中，接地电阻的总和。测试点：测试时，所选定放置测试电极（或表笔）的部位。表面电阻：在试样的某一表面上两电极间所加电

5、压与经过一定时间后流过两电极间的电流之商。体积电阻：在试样的相对两表面上放置的两电极间所加直流电压与流过两个电极之间的稳态电流之商。.内容：防静电设施检测接地系统的检测按图一所示。使用接地电阻测量仪测试防静电地极的接地电阻o、极电阻测量仪地极电流探针电位探针20m40m图一防静电地极接地电阻测试测试步骤：a）将被测地极用导线接于仪器端子E；b）在相同直线方向20m、40m潮湿土地处，分别插入电位探测针及电流探测针，各接于仪器端子P、C;c）设置“倍率盘”倍数；DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20

6、/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00HBusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page3of10Allrightsreservedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.Busin

7、essExcellencethruSpeedandTeamwork!d）自缓至快摇动仪器手柄，达到120r/min,调整“测量标度盘”，指针指于零位时，读数乘以倍率标度，即为接地电阻值；e）按测试步骤c,d反复测试35次，取平均值。防静电地垫，地面的检测按图二a所示，测试表面电阻按图二b所示，测试体积电阻测试电极6502KG500VD欧表R湿滤纸垫a表面电阻测试测试电极6 502KG500VD欧表板伏辅助电极湿滤纸垫b体积电阻测试图二材料表面电阻和体积电阻测试工作台，工作椅工作台随机选定测试点，每个工作台不得少于3点。按图二a所示，测试工作台面表面电阻。按图三所示，测试工作台面对腕带插孔电阻。

8、DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00HBusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page4of10Allrightsreservedandcompanyrestricted.Reproductioninwholeo

9、rinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!按图四所示，测试工作台面对地系统电阻。500VD然欧表测试电极6502KGR腕带插孔湿滤纸垫HH工作台面对腕带插孔电阻测试图三工作台面对腕带插孔电阻测试500VD然欧表工作台面对地系统电阻测试图四工作台面对地系统电阻测试工作椅随机选定测试点，每个工作台不得少于5点。按图五所示，测试椅面对脚轮的电阻。按图六所示，测试椅面与靠背间电阻。DocumentControlStampPreparedByR

10、eviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00BusinessCentreElectronicsHPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page5of10Allrightsreservedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewr

11、ittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!图五工作椅面对脚轮电阻测试O图六4.1.4工作服，工作鞋底工作椅面与靠背表面间电阻测试。按图七所示，测试防静电工作服表面电阻。如图所示分别测试A、B、C、D四点与基准点间的表面电阻。按图八所示，测试防静电工作鞋底体积电阻。DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumb

12、er:06-102-xxxRev.:00Page 6 of 10All rights reserved and company restricted. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Business Excellence thru Speed and Teamwork!BusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,Shangha

13、iChina200233图七防静电工作服表面电阻测试。500VD佻欧表测试电极（|）50 2KG R测试电极150 2KG金属板辅助电极工作鞋底体积电阻测试图八防静电工作鞋底体积电阻测试工位器具及物流系统按图九所示，测试工位（传递）器具表面、体积电阻。按图十所示，测试物流车台面对车轮系统电阻。DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00HBusinessCentre

14、ElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page7of10Allrightsreservedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!500VDCS欧表R容器测试电极 50 2KG湿滤纸垫a容器表面电阻测试500VDC&欧表板伏辅助电极

15、湿滤纸垫测试电极小 50 2KGb容器体积电阻测试图九工位（传递）器具表面、体积电阻测试DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00HBusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page8of10Allrightsreser

16、vedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!物流车测试电极3 50 2KG图十物流车台面对车轮系统电阻测试腕（脚跟）带系统电阻按图十一所示,测试佩带腕带时系统电阻。佩带腕带时系统电阻测试120次/min ,手掌适当施加压力，单环境（墙壁，窗帘）（摩擦起电电压测试）测试时手持干燥布料（选用纯棉或防静电面料），以频数约向摩擦被测件某一部位20次，按静电电

17、压表使用方法立即接近摩擦部位，观察仪表显示数值。2.3.4.反复测试5次取平均值。使用非接触式静电电压表测量。该检测方法除适用与对环境（墙壁，窗帘）等的测试外还可检测生产场地防静电设施表面摩擦起电电压的测试。包括：地面（地垫）、工作台（台垫）、工作椅、货架、工位器具、物流传递器具、输送皮带线、包装袋（盒）、工作服（工作帽、手套）、工作鞋等。4.1.8测试技术指标DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumb

18、er:06-102-xxxRev.:00HBusinessCentreElectronicsPhilipsLightingElectronicBuilding-1,889YishanRoad,ShanghaiChina200233Page9of10Allrightsreservedandcompanyrestricted.Reproductioninwholeorinpartisprohibitedwithoutthewrittenconsentofthecopyrightowner.BusinessExcellencethruSpeedandTeamwork!项目表面电阻值Q体积电阻值Q电阻

19、值Q摩擦电压V防静电地极接地电阻10地面1051010100地面对地极母线电阻5*105108墙壁400窗帘400地垫105109105108100工作台垫106109105108100工作台面106109100工作台面对腕带插孔电阻105108工作台面对地系统电阻106108工作椅面对脚轮的电阻106108椅面与靠背电阻1081010100工作服、工作帽、手套300工作鞋底0.5*105108100工位器具及物流传递器具103108103107100包装袋（盒）100物流车台面对车轮系统电阻106109佩带腕带时系统电阻1M10M4.2防静电设施的施工防静电接地系统的施工要求a）防静电系统必

20、须有独立可靠的接地装置，接地电阻一般应小于10Q。b）防静电地线不得接在电源零线上，不得与防雷地线共用。c）使用三相五线制供电，其大地线可以作为防静电地线（但零线、地线不得混接）。d）接地主干线截面积应不小于100mr2;支干线截面积应不小于6mm；设备和工作台的接地线应采用截面积不小于1.25mm2的多股敷塑导线，接地线颜色以黄绿色线为宜。e）接地主干线的连接方式应采用钎焊。f）防静电设备连接端子应确保接触可靠，易装拆，允许使用各种夹式连接器，如鳄鱼夹、插头座等防静电地垫的施工要求及维护施工要求：.静电地垫材料参数应符合标准。.在铺设施工前必须保持地面平整。.地垫铺设时应在地垫下贴双面胶以防

21、止地垫移动；二地垫拼接处应平整，无缝隙；铺设完后应及时将保护膜拉去。.每块地垫应至少有二个接地端与接地系统连接。清洁维护：.保持地垫表面的清洁。.严禁重物在地垫上移动。.发现接地线有脱落现象应及时报修（维修）。4.2.3离子风机的维护及检测维护：.定期清洁离子发射针。.定期检测离子风机电源系统。检测：DocumentControlStampPreparedByReviewedByApprovedByEffectiveDate:3/20/2005RevisionDate:FileName:防静电设施检测、施工及维护要求FileNumber:06-102-xxxRev.:00All rights reserved and company restricted. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Philips Lighting ElectronicPage 10 ofBuilding-1,889 Yishan Road, Shanghai Chin