从其他交换机下载版本到故障的交换机

Zte#contzte(cfg-tffs)#lsstartcfg.txtrunning.cfgkernel.z1,352bytes203,875bytes1,235,048bytes1,455bytesconfig.txtsnmpboots.v334bytes501,760bytesfreezte(cfg-tffs)#2．将版本文件备份到电脑上上传版本文件，上传后在TFTP指定的目录中找到文件，大小和设备上文件相同，表示备份成功zte(cfg-tffs)#tftp35uploadkernel.z....................................................................................................................................................................................1,235,048bytesuploadedzte(cfg-tffs)#二．异常下载版本导入1、设备重启，版本传到设备上Pressanykeytostopauto-boot...6-----------------------------------------------------//按任意键进入Boot模式[ZXR10Boot]:c---------------------------------------//按小写字母c'.'=clearfield;'-'=gotopreviousfield;^D=quitbootdeviceprocessornumber2端口）:wbdEnd1-----------------------------------//无需修改，直接回车:02-------------------------//交换机与PC互联的端口（我用的是hostnamefilename:tiger----------------------------------//无需修改，直接回车:kernel----------------------------------//无需修改，直接回车inetonethernet(e):06----------------------//交换机的ipinetonbackplane(b):----------------------//掩码:8----------------------//PC的ip:8----------------------//交换机的hostinet(h)gatewayinet(g)user(u)ip:ftppassword(pw)(blank=usersh):flags(f):0x80:targetname(tn)startupscript(s):other(o):[ZXR10Boot]:zte-----------------------//输入zte后会让你再输入[PASSWORD]:LoadwbdEndBeginW90N740MAC0:10MB-HalfDuplex[PASSWORD]:--------------------------//此处再输入zte，如果不行就输入zxr10就会进入[BootManager]:模式BoardType=0x18Board2818S-EI!Marvellhasbeeninitialized!bootdeviceunitnumberprocessornumberhostname:wbdEnd:0:2:tiger:kernelfilenameinetonethernet(e):inetonbackplane(b):hostinet(h)gatewayinet(g)flags(f):::0x80AttachedTCP/IPinterfacetowbdEnd0.Warning:nonetmaskspecified.Attachingnetworkinterfacelo0...done.AttachingtoTFFS...testflashpassedperfectly!Welcometobootmanager!Type'?'forhelp[BootManager]:ls-----------------------------------------------//ls会显示出此交换机里有什么文件start.cfg364snmpboots.v3startcfg.txt36481tech-support.txt38097

running.cfg213613[BootManager]:?---------------------------------------------//输入？回车会显示在[BootManager]:下可使用的命令lspwddevsshowreboot----------------------------------------------------//重启设备formatsetPassworddelmdmfcdfile_namedir_namefile_nameabsolute_pathnametftpip_addressfile_name------------------------------//上传版本命令uploadip_addressfile_nameupdatefile_namerenamefile_namenewname[BootManager]:[BootManager]:tftpkernel.z-----------------------//把版本输入交换机Loading...done![BootManager]:ls-------------------------------------------//完毕后用ls察看，就可以看到版本文件start.cfg364snmpboots.v3startcfg.txttech-support.txtrunning.cfgkernel.z36481