【BS英国标准word原稿】BS EN 12503-1-2001 Sports mats. Gymnastic mats, safety requirements.doc

，如果你需要更多标准可以到/kmust1进行免费查阅。 如果你购买的文档存在缺页、字迹模糊、乱码等情况，请大家通过论坛消息与我联系。british standard bs en12503-1:2001incorporatingcorrigendum no. 1sports mats part 1: gymnastic mats, safety requirementsthe european standard en 12503-1:2001 has the status of abritish standardics 97.220.30 bs en 12503-1:2001national forewordthis british standard is the official english language version ofen 12503-1:2001, including corrigendum july 20002. together withbs en 12503-2:2001, bs en 12503-3:2001, bs en 12503-4:2001,bs en 12503-5:2001, bs en 12503-6:2001 and bs en 12503-7:2001, it supersedes bs 1892-2.10:1990 which will be withdrawn on 15 august 2001.the uk participation in its preparation was entrusted to technical committeesw/14, gymnasium and sports equipment, which has the responsibility to:aid enquirers to understand the text;this british standard, having been prepared under the direction of the consumer products and services sector committee, was published under the authority of the standards committee and comes into effect on15 june 2001amd. no.datecomments14130corrigendum no. 116 december 2002changes to table 3 bsi 16 december 2002isbn 0 580 37267 7present to the responsible european committee any enquiries on the interpretation, or proposals for change, and keep the uk interests informed;monitor related international and european developments and promulgate them in the uk.a list of organizations represented on this committee can be obtained on request to its secretary.additional informationmat types 1 and 2mat types 1 and 2 are intended primarily for use in school gymnastics at the discretion of qualified teachers for the purpose of agility exercises. guidance on mats and their use may be obtained from the relevant local authority or the british association of advisers and lecturers in physical education (baalpe), .flame retardancyfor sports matting used in the uk certain minimum levels of flame retardancy and the required test methodology will be detailed in bs 1892-3, which is in preparation.cross-referencesthe british standards which implement international or european publications referred to in this document may be found in the bsi catalogue under the section entitled “international standards correspondence index”, or by using the “search” facility of the bsi electronic catalogue or of british standards online.this publication does not purport to include all the necessary provisions of a contract. users are responsible for its correct application.compliance with a british standard does not of itself confer immunity from legal obligations.summary of pagesthis document comprises a front cover, an inside front cover, the en title page, pages 2 to 6, an inside back cover and a back cover.the bsi copyright date displayed in this document indicates when the document was last issued.amendments issued since publicationeuropean standard norme europenneeuropische normen 12503-1april 2001ics 97.220.30incorporating corrigendum july 2002english versionsports mats - part 1: gymnastic mats, safety requirementstapis de sport - partie 1: tapis de gymnastique, exigences de scuritsportmatten - teil 1: turnmatten, sicherheitstechnischeanforderungenthis european standard was approved by cen on 21 january 2001.cen members are bound to comply with the cen/cenelec internal regulations which stipulate the conditions for giving this european standard the status of a national standard without any alteration. up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the management centre or to any cen member.this european standard exists in three official versions (english, french, german). a version in any other language made by translation under the responsibility of a cen member into its own language and notified to the management centre has the same status as the official versions.cen members are the national standards bodies of austria, belgium, czech republic, denmark, finland, france, germany, greece, iceland, ireland, italy, luxembourg, netherlands, norway, portugal, spain, sweden, switzerland and united kingdom.european committee for standardization c o m i t eur o p en de nor m a l i s a ti on eur o p i s c h es kom i t e e f r nor m ung management centre: rue de stassart, 36 b-1050 brussels 2001 cenall rights of exploitation in any form and by any means reserved worldwide for cen national members.ref. no. en 12503-1:2001 epage 5en 12503-1:2001contentspageforeword . 21 scope . 32 normative references . 33 terms and definitions . 34 classification . 45 safety requirements . 46 marking . 5annex a (informative) flame retardancy . 6forewordthis european standard has been prepared by technical committee cen/tc 136 sports, playground and other recreational equipment, the secretariat of which is held by din.this european standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by october 2001, and conflicting national standards shall be withdrawn at the latest by october 2001.this standard en 12503 sport mats consists of: part 1: gymnastic mats, safety requirementspart 2: pole vault and high jump mats, safety requirementpart 3: judo mats, safety requirements part 4: determination of shock absorption part 5: determination of the base friction part 6: determination of the top friction part 7: determination of static stiffnessannex a is informative.according to the cen/cenelec internal regulations, the national standards organizations of the following countries are bound to implement this european standard: austria, belgium, czech republic, denmark, finland, france, germany, greece, iceland, ireland, italy, luxembourg, netherlands, norway, portugal, spain, sweden, switzerland and the united kingdom.1 scopethis standard specifies safety requirements (including performance requirements) for 8 types of gymnastic mats used in school, training and competition, see clause 4.the performance and safety values cover shock absorption, anti-slip characteristics of the base and top friction characteristics of the surface.note for the specific requirements of international official competitions, see appropriate international regulations.2 normative referencesthis standard incorporates, by dated or undated reference, provisions from other publications. these normative references are cited at the appropriate places in the text and the publications are listed hereafter. for dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. for undated references, the latest edition of the publication referred to applies (including amendments).en 12503-4:2001. sports mats part 4: determination of shock absorptionen 12503-5:2001. sports mats part 5: determination of the base frictionen 12503-6:2001. sports mats part 6: determination of the top friction3 terms and definitionsfor the purposes of this standard the following terms and definitions apply:3.1shock absoprtionability of the mat to reduce impact forces on the athlete, expressed as a maximum deceleration under defined test conditions3.2 deflectionability of the mat to deform to an impact whilst maintaining the athletes stability, expressed as maximum deflection under defined test conditions3.3 resilienceability of the mat to return energy after an impact, expressed as resilience in percent under defined test conditions3.4 surfaceupper side of the mat on which the athete moves3.5 baseunder side of the mat designed to be in contact with the floor during use4 classificationgymnastic mats shall be classified by the design (types) as shown in table 1.table 1 - typestypetypical use1mat for floor exercise without jumping (foundation skills)2mat for floor exercise with jumping3mat for floor exercise with jumping and landing4mat for simple dismount from apparatus with controlled landing5mat for dismount6mat for difficult dismount7fall mattress for simple exercises8fall mattressnote for types 9, 10 and 11 see en 12503-2:2001, for type 12 see en 12503-3:2001.5 safety requirements5.1 shock absorptionwhen tested according to en 12503-4:2001, the gymnastic mat shall comply with the values of table 2 according to the appropriate type.table 2 - shock absorptiontypepeak decelerationg(1 g = 9,81 ms-2)deflection mmresilience%1 80not needednot needed2 65 3520 to 603 30 50 554 40 110 505 25 110 306 14a 105a 15a7 35 185 258 20 250 25a these are comparable figures to fig (fdration internationale de gymnastique) standards from 19975.2 base friction characteristicswhen tested in accordance with en 12503-5:2001, the gymnastic mat shall comply with the values given in table 3.table 3 - base friction characteristicstypefrictional value1no requirement2 1,53 1,54 4,55 4,56 4,57 4,58 4,55.3 top friction characteristicswhen tested in accordance with en 12503-6:2001, the gymnastic mat shall comply with the values of table 4.table 4 - top friction characteristicstypefrictional value1 0,82 0,83 0,84 0,85 0,86 0,87not needed8not needed6 markingmat shall be marked legibly and indelibly with the following information:a) the number of this european standard en 12503-1 and the type number;b) the name and trademark of the manufacturer, retailer or importer and the year of manufacture;c) which is the top surface of the mat (if not clearly recognizable).page 6en 12503-1:2001annex a (informative)flame retardancysports matting for use in the united kingdom shall satisfy certain minimum levels of flame retardancy. these levels and the required test methodology are detailed in bs 1892: 2.10 : 1999 (revised).blankbs en12503-1:2001bsi389 chiswick high roadlondonw4 4albsi british standards institutionbsi is the independent national body responsible for preparingbritish standards. it presents the uk view on standards in europe and at the international level. it is incorporated by royal charter.revisionsbritish standards are updated by amendment or revision. users ofbritish standards should make sure that they possess the latest amendments or editions.it is the constant aim of bsi to improve the quality of our products and services. we would be grateful if anyone finding an inaccuracy or ambiguity while using this british standard would inform the secretary of the technical committee responsible, the identity of which can be found on the inside front cover.tel: +44 (0)20 8996 9000. fax: +44 (0)20 8996 7400.bsi offers members an individual updating service called plus which ensures that subscribers automatically receive the latest editions of standards.buying standardsorders for all bsi, international and foreign standards publications should be addressed to customer services. tel: +44 (0)20 8996 9001.fax: +44 (0)20 8996 7001. email: . standards are alsoavailable from the bsi website at .in response to orders for international standards, it is bsi policy to supply the bsi implementation of those that have been published as british standards, unless otherwise requested.information on standardsbsi provides a wide range of information on national, european and international standards through its library and its technical help to exporters service. various bsi electronic information services are also available which give details on all its products and services. contact the information centre.tel: +44 (0)20 8996 7111. fax: +44 (0)20 8996 7048. email: .subscribing members of bsi are kept up to date with standards developments and receive substantial discounts on the purchase price of standards.