




免费预览已结束,剩余20页可下载查看
下载本文档
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
differential analysis on of td-lte and lte fdd,td-lte system, hao dandan,outline,executive summary of differential analysis key differential analysis algorithm analysis requirements for next step cooperation note: this ppt is based on the version of 3gpp rel.8 36 series released in dec. 2008.,executive summary of differential analysis for physical layer,physical layer differential analysis,physical layer differential analysis,physical layer differential analysis,physical layer differential analysis,physical layer differential analysis,mac/rlc/pdcp/rrc/nas,key differential analysis,outline,frame structure cell search random access harq special subframe frequency band,key differential analysis frame structure,frame structure frame structure type 1 - fdd frame structure type 2 tdd td-lte frame structure can flexible configured, and can align with td-scdma system. so the td-scdma and td-lte can co-exist at same position.,key differential analysis frame structure,high impact on phy software: 7 frame structures x 9 special subframes = 63 frame configurations for td-lte vs. 1 for fdd (normal cyclic prefix) control of special subframes switching from dl to ul (min. gp given by ta) different rate matching control of subframes dl or ul only switching from ul to dl within a gap of minimum timing advance taoffs = 20 ms guard period (gp) between dl and ul standard timing advance (ta) mechanism used,8dl+dwpts:1ul,ta+taoffs,gp,frame structures,key differential analysis cell search,cell search the position of p-sch and s-sch is different for fdd and tdd,the agc and afc control and adjustment procedure should be different for fdd and tdd,key differential analysis - prach,random access preamble format 4 is for frame structure type 2 only, uppts can be used to sending preamble. preamble mapping in time and frequency is different for frame structure type 1 and type 2 for frame structure type 2, there might be multiple random access resources in an ul subframe.,release buffer,release buffer,discard,key differential analysis - harq,8 harq buffers and 8 processes for fdd, up to 15 processes specified for td-lte (config 5) implementation of td-lte specific ack/nack timing ul harq varying number of phich groups in a frame (config 0) extension of dci formats on pdcch implementation of td-lte bit-fields in dci formats,4,5,6,7,8,9,10,11,12,13,14,15,1,2,3,process #:,5,keep buffer,take next buffer,3,take next buffer,5,keep buffer,take next buffer,9,take next buffer,14,11,2,1,3,2,4,5,6,7,8,6,2,7,8,10,12,15,nack,ack,#,harq buffer occupied by process #,no buffer,3,-,-,2xphich,1xphich,frame configuration 0,key differential analysis - harq,according to 3gpp ts 36.213: the number of harq processes is determined by the dl/ul configuration. upon detection of a pdcch with dci format 0 and/or a phich transmission in subframe n intended for the ue, the ue shall: adjust the corresponding pusch transmission in subframe n+k, with k3 according to the pdcch and phich information transmit the ack/nack response in ul subframe n+k, with k3, (if ack/nack is provided) the use of a single ack/nack response for providing harq feedback for multiple pdsch transmissions is supported by performing logical and of all the corresponding individual pdsch transmission ack/nacks.,n+k, k=8,n+k, k=7,n+k, k=6,n+k, k=4,bundling,key differential analysis ack/nack,ack/nacks of multiple dl subframes in one ul subframe bundling (and of acks) for pucch/pusch multiple ack/nacks combined to single ack/nack reuse of existing pucch formats multiplexing (multiple acks) for pucch/pusch multiple ack/nacks combined over mimo code words reuse of existing pucch formats by using multiple pucch resources handle missed dl assignments (dai) combinations with cqi, sr, srs def: pucch = physical ul control channel def: pusch = physical ul shared channel,key differential analysisack/nack encoding and timing,ul ack/nack for dl harq bundling and multiplexing for pucch determination and selection of pucch resource index,n+k, k=8,n+k, k=7,n+k, k=6,n+k, k=4,bundling,key differential analysis special subframe,normal cp 14 symbols/subframe,extended cp 12 symbols/subframe,3:10:1,3:8:1,9:4:1,10:3:1,11:2:1,12:1:1,3:9:2,9:3:2,10:2:2,11:1:2,8:3:1,9:2:1,10:1:1,3:7:2,8:2:2,9:1:2,dwpts,uppts,key differential analysis special subframe,dwpts/uppts dwpts pcfich、pdcch、phich、pdsch and p-sch p-sch is located at third symbol of dwpts at last two symbol for downlink control uppts sounding rs prach,key differential analysis ue specific reference signals,extraction and control of dedicated pilots channel estimation for discontinuous d
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 古交市2025山西太原古交市招聘事业单位人员48人笔试历年参考题库附带答案详解
- 云浮市2025广东云浮市云安区机关事业单位招聘紧缺人才5人笔试历年参考题库附带答案详解
- 2025贵州黔西经济开发区投资发展有限公司招聘8人笔试参考题库附带答案详解
- 2025福建漳州台商投资区产业发展集团有限公司招聘10人笔试参考题库附带答案详解
- 2025湖北省铁路发展基金公司招聘11人笔试参考题库附带答案详解
- 2025浙江嘉兴市海宁市尖山新区开发有限公司招聘12人笔试参考题库附带答案详解
- 2025新疆西北兴业城投集团有限公司岗位招聘26人笔试参考题库附带答案详解
- 2025年湖南国家级望城经济技术开发区投资建设集团校园招聘10人笔试参考题库附带答案详解
- 2025年国网安徽省电力有限公司高校毕业生招聘(第二批)笔试参考题库附带答案详解
- 2025山东日照城投集团有限公司招聘6人笔试参考题库附带答案详解
- 零工市场(驿站)运营管理 投标方案(技术方案)
- 新《全面质量管理(习题集)》考试题库(含答案)
- 农村建房的邻居协议书模板
- 生物质压缩成型工艺与实践考核试卷
- 【物业分享】神秘顾客(交付项目物业服务体验)调查评分表
- 铝合金门窗来料加工合同范本
- 水杨酸软膏剂的制备
- MSA分析报告样本
- 基础应用化学(高职)全套教学课件
- 《铁皮石斛的介绍》课件
- 低压配电柜技术规范书
评论
0/150
提交评论