XP与CentosLinux双系统默认启动顺序解决方案.doc

XP与Centos 双系统默认启动顺序解决方案情况一：默认Centos启动，要改为XP启动1、进入Centos系统，寻找系统启动文件，然后使用vi 或 gedit 等指令打开配置文件进行更改。2、配置文件位置：/etc/grub.conf 或 /boot/grub/grub.conf 3、配置文件内容#以下为配置文件内容 # grub.conf generated by anaconda# Note that you do not have to rerun grub after making changes to this file# NOTICE: You do not have a /boot partition. This means that# all kernel and initrd paths are relative to /, eg.# root (hd0,2)# kernel /boot/vmlinuz-version ro root=/dev/sda3# initrd /boot/initrd-version.img#boot=/dev/sdadefault=0 #默认启动的系统，默认启动第一个系统。（更改其值，可改变启动顺序）timeout=5 #等待超时时间为5秒。splashimage=(hd0,2)/boot/grub/splash.xpm.gz#开机图片地址。Hiddenmenu #是否显示开机菜单。title XP#第一个系统 （更改其顺序，可改变启动顺序） rootnoverify (hd0,0) chainloader +1title CentOS (2.6.18-238.el5xen) #第二个系统 root (hd0,2) kernel /boot/xen.gz-2.6.18-238.el5 module /boot/vmlinuz-2.6.18-238.el5xen ro root=LABEL=/1 rhgb quiet module /boot/initrd-2.6.18-238.el5xen.imgtitle CentOS-base (2.6.18-238.el5) #第三个系统 root (hd0,2) kernel /boot/vmlinuz-2.6.18-238.el5 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.18-238.el5.img#更改其值方案如下：# grub.conf generated by anaconda# Note that you do not have to rerun grub after making changes to this file# NOTICE: You do not have a /boot partition. This means that# all kernel and initrd paths are relative to /, eg.# root (hd0,2)# kernel /boot/vmlinuz-version ro root=/dev/sda3# initrd /boot/initrd-version.img#boot=/dev/sdadefault=1 #默认启动的系统，默认启动第二个系统。（更改其值，可改变启动顺序）timeout=5 #等待超时时间为5秒。splashimage=(hd0,2)/boot/grub/splash.xpm.gz#开机图片地址。Hiddenmenu #是否显示开机菜单。title XP#第一个系统 （更改其顺序，可改变启动顺序） rootnoverify (hd0,0) chainloader +1title CentOS (2.6.18-238.el5xen) #第二个系统 root (hd0,2) kernel /boot/xen.gz-2.6.18-238.el5 module /boot/vmlinuz-2.6.18-238.el5xen ro root=LABEL=/1 rhgb quiet module /boot/initrd-2.6.18-238.el5xen.imgtitle CentOS-base (2.6.18-238.el5) #第三个系统 root (hd0,2) kernel /boot/vmlinuz-2.6.18-238.el5 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.18-238.el5.img#更改顺序方案如下：# grub.conf generated by anaconda# Note that you do not have to rerun grub after making changes to this file# NOTICE: You do not have a /boot partition. This means that# all kernel and initrd paths are relative to /, eg.# root (hd0,2)# kernel /boot/vmlinuz-version ro root=/dev/sda3# initrd /boot/initrd-version.img#boot=/dev/sdadefault=0 #默认启动的系统，默认启动第一个系统。（更改其值，可改变启动顺序）timeout=5 #等待超时时间为5秒。splashimage=(hd0,2)/boot/grub/splash.xpm.gz#开机图片地址。Hiddenmenu #是否显示开机菜单。title CentOS (2.6.18-238.el5xen) #第一个系统 （更改其顺序，可改变启动顺序） root (hd0,2) kernel /boot/xen.gz-2.6.18-238.el5 module /boot/vmlinuz-2.6.18-238.el5xen ro root=LABEL=/1 rhgb quiet module /boot/initrd-2.6.18-238.el5xen.imgtitle CentOS-base (2.6.18-238.el5) #第二个系统 root (hd0,2) kernel /boot/vmlinuz-2.6.18-238.el5 ro root=LABEL=/1 rhgb quiet initrd /boot/initrd-2.6.18-238.el5.imgtitle XP#第三个系统 rootnoverify (hd0,0) chai