EIAJED-7311-17Standardofintegratedcircuitspackages(P-ZIP).pdf

Standard of Japan Electronics and Information Technology Industries Association EIAJ ED-7311-17 Standard of integrated circuits packages (P-ZIP) Established in June, 2001 Prepared by Technical Standardization Committee on Semiconductor Device Package Published by Japan Electronics and Information Technology Industries Association 11, Kanda-surugadai 3-chome, Chiyoda-ku, Tokyo 101-0062, Japan Printed in Japan Translation without guarantee in the event of any doubt arising, the original standard in Japanese is to be evidence. JEITA standards are established independently to any existing patents on the products, materials or processes they cover. JEITA assumes absolutely no responsibility toward parties applying these standards or toward patent owners. 2001 by the Japan Electronics and Information Technology Industries Association All rights reserved. No part of this standards may be reproduced in any form or by any means without prior permission in writing from the publisher. EIAJ ED-7311-17 - 1 - Standard of Japan Electronics and Information Technology Industries Association Standard of integrated circuits package (P-ZIP) 1.Scope of Application This standard covers the registered dimensions of the Zigzag Inline packages/ Shrink Zigzag Inline packages, terminal straight e pitch is 1.27mm (50mil)/ less than 0. 889mm (35 mil), among the packages classified as form C in the EIAJ ED-7300 Recommended practice on Standard for the preparation of outline drawings of semiconductor packages Note.This standard is the revision version to have integrated two standards into which EIAJ ED- 7405 (P-ZIP) and EIAJ ED-7405-1 (P-SZIP). 2.Definition of the Technical Terms The definition of the technical terms used in this technical report is in conformity with EIAJ ED- 7300, and the definition of technical terms appearing a new are given within the text of this standard. 3.BACKGROUND Recently, through hole type package P-ZIP with reduced print circuits board area were developed for small size electronics devices. This technical report intended to standardize the outer dimensions of P- ZIP, P-SZIP, and ensure compatibility between products as far as possible for standardization. 4.Definition of P-ZIP/P-SZIP P-ZIP/P-SZIP is defined as Form C in the classification of shapes of semiconductor device at the EIAJED-7300 and terminal straight pitch is 1.27mm (50mil)/ less than 0.889mm (35 mil) by bending terminal make a two lines in alternately forming leads from one package body side to a seating plane. 5.Numbering of Terminals Numbering of terminals complies with the EIAJ ED-7300. 6.Nominal Dimensions Package height Package length is applied to Nominal Dimensions. (Symbol : A2 nom D1 nom) EIAJ ED-7311-17 - 3 - 7. REFERENCE CHARACTERS AND DRAWING 7.1 Outline Drawing Figure 1 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 1/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 ( ) 1 7 ( ) ( ) 8 5 ( ) ( ) 5 ( ) 3 8 ( ) 7 ( ) ( ) 4 8 ( ) ( ) 7 6 ( ) e e1 L C A B MX 0.50 E D1/3 n1 INDEX AREA B A C b D D1 A3 A2A1 A b2 Z1 Z Z1 Z c b1 b c1 c EIAJ ED-7311-17 - 4 - Notes: (1)The bending direction of terminal No.1 is in the side of the terminal No.1 index. (2)The seating plane is determined when the terminal is inserted to hole that of center is located in the matrix as modulus e / e1 . (3)The maximum mounting conditions apply to the positional tolerance of the terminals.(For the maximum body conditions, refer to ISO/1101, part II) (4)Shows the allowable position of the index mark, which of more than half must be included in the shaded area. (5)Specifies the true geometric position of the terminal axis. (6)The shapes of chanfer is recommended in Figure 3. (7)Resin flash, leadframe cutting remain and gate remains are not included. (8)Resin flash, leadframe cutting remain and gate remains are included. JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 2/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Figure 2 0.8mm e1 Seating Plane Bending Cross Point of terminal Figure 3 EIAJ ED-7311-17 - 5 - 8. Registration table (Package name):P-ZIP/P-SZIP (Registration number): IC-7311-17-00-00.0-XX Note.The Numbers in the table indicate, (Terminal number n)-(package length D1nom)-(serial number) JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 3/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Terminal pitch e Letter CodeA2nom1.270.889 A4.40 16-14.0-AA 16-14.0-AB 16-13.8-AC 16-13.8-AD B5.80 14-18.2-BA 18-23.3-BB C6.8021-19.4-CA D8.80 20-25.5-DA 20-25.5-DB 20-30.5-DC 22-30.2-DE 28-36.0-DF E10.80 24-30.5-EA 40-51.2-EB F12.8064-54.0-FA EIAJ ED-7311-17 - 6 - Serial Number AAAB External TypeP-SZIP16-4.3 14.0-0.89P-SZIP16-4.3 14.0-0.89 Reference Symbol minnommaxminnommax A-5.35-5.35- A1-1.00-1.00- A24.354.35 A3-8.45-7.65- b0.360.400.480.360.400.48 b10.350.400.450.350.400.45 b20.000.150.300.000.150.30 C0.190.200.250.190.200.25 C10.190.200.210.190.200.21 D13.9014.0014.1013.9014.0014.10 D1-14.00-14.00- E2.102.202.302.102.202.30 e-0.889-0.889- e1-1.778-1.778- 048048 x-0.23-0.23- n-16-16- Z-0.61-0.61- Z1-0.508-0.508- L2.753.003.251.952.202.45 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 4/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 7 - Serial Number ACAD External TypeP-SZIP16-4.35 13.8-0.89P-SZIP16-4.35 13.8-0.89 Reference Symbol minnommaxminnommax A5.085.405.7155.085.405.715 A10.951.101.250.951.101.25 A24.254.354.454.254.354.45 A37.628.509.7797.627.709.779 b0.300.400.450.300.400.45 b10.350.400.450.350.400.45 b20.200.250.300.200.250.30 C0.150.200.300.150.200.30 C10.150.200.250.150.200.25 D13.914.014.413.914.014.4 D113.713.814.213.713.814.2 E2.102.202.302.102.202.30 e-0.889-0.889- e1-1.778-1.778- 048048 x-0.25-0.25 n-16-16- Z-0.33-0.33- Z1-0.23-0.23- L2.853.103.352.052.302.55 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 5/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 8 - Serial Number BABB External TypeP-ZIP14-6.0 18.2-1.27P-ZIP18-6.0 23.3-1.27 Reference Symbol minnommaxminnommax A7.768.268.767.768.268.76 A11.762.262.761.762.262.76 A25.76.06.35.76.06.3 A310.5611.2611.7610.5611.2611.76 b0.400.500.600.400.500.60 b10.450.500.550.450.500.55 b20.200.250.350.200.250.35 C0.200.250.350.200.250.35 C10.200.250.350.200.250.35 D17.918.218.523.023.323.6 D118.018.218.423.123.323.5 E2.73.03.32.73.03.3 e-1.27-1.27- e1-2.54-2.54- 048048 x-0.25-0.25 n-14-18- Z-0.895-0.895- Z1-0.865-0.865- L2.53.03.52.53.03.5 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 6/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 9 - Serial Number CA External TypeP-SZIP21-6.3 19.4-0.89 Reference Symbol minnommax A8.03 A10.931.231.53 A26.106.306.50 A311.33 b0.350.450.55 b10.400.450.50 b20.200.250.30 C0.200.250.35 C10.200.250.30 D19.90 D119.2019.4019.60 E3.003.203.40 e0.889 e12.54 048 x0.25 n21 Z0.96 Z10.81 L2.703.003.30 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 7/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 10 - Serial Number DADB External TypeP-ZIP20-8.5 25.5-1.27P-ZIP20-8.96 25.5-1.27 Reference Symbol minnommaxminnommax A9.539.8010.169.539.8010.16 A10.761.301.860.760.851.00 A28.308.508.808.668.969.26 A312.6313.1013.6612.6113.1113.61 b0.440.520.600.440.520.60 b10.470.520.570.470.520.57 b20.150.250.350.150.250.35 C0.190.270.350.140.220.30 C10.220.270.320.170.220.27 D25.2525.5025.7525.2525.5025.75 D125.3525.5025.6525.3525.5025.65 E2.652.802.952.652.802.95 e-1.27-1.27- e1-2.54-2.54- 048048 x-0.25-0.25 n-20-20- Z-0.685-0.685- Z1-0.685-0.685- L3.103.303.503.103.303.50 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 8/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 11 - Serial Number DCDE External TypeP-ZIP20-8.5 30.5-1.27P-ZIP22-8.5 30.2-1.27 Reference Symbol minnommaxminnommax A9.539.8010.169.709.8010.30 A10.901.101.301.301.802.30 A28.308.508.808.408.508.60 A312.4012.9013.4012.8513.2013.95 b0.440.520.600.450.500.65 b10.470.520.570.450.500.55 b20.150.250.350.200.250.30 C0.190.270.350.200.250.40 C10.220.270.320.200.250.30 D30.2530.5030.7530.1530.4030.65 D130.3530.5030.6530.1030.2030.30 E2.652.802.952.903.003.10 e-1.27-1.27- e1-2.54-2.54- 048048 x-0.25-0.25 n-20-22- Z-3.185-1.87- Z1-3.185-1.77- L3.103.303.503.153.403.65 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 9/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 12 - Serial Number EAEB External TypeP-ZIP24-10.7 30.5-1.27P-ZIP40-10.7 51.2-1.27 Reference Symbol minnommaxminnommax A11.4011.7012.0011.4011.7012.00 A10.801.001.200.801.001.20 A210.4010.7011.0010.4010.7011.00 A314.5015.0015.5014.5015.0015.50 b0.440.520.600.440.520.60 b10.470.520.570.470.520.57 b20.150.250.350.150.250.35 C0.190.270.350.190.270.35 C10.220.270.320.220.270.32 D30.2530.5030.7549.9551.2051.45 D130.3530.5030.6550.0551.2051.35 E2.652.802.952.652.802.95 e-1.27-1.27- e1-2.54-2.54- 048048 x-0.25-0.25 n-24-40- Z-0.645-0.835- Z1-0.645-0.835- L3.103.303.503.103.303.50 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 10/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 13 - Serial Number DEFA External TypeP-ZIP22-8.5 30.2-1.27P-SZIP64-13.75 54-0.82 Reference Symbol minnommaxminnommax A9.709.8010.3016.30 A11.301.802.302.00 A28.408.508.6013.6013.7513.90 A312.8513.2013.9519.10 b0.450.500.650.300.400.50 b10.450.500.550.350.400.45 b20.200.250.300.200.250.30 C0.200.250.400.200.250.35 C10.200.250.300.200.250.30 D30.1530.4030.6554.50 D130.1030.2030.3053.8054.0054.20 E2.903.003.103.453.553.65 e-1.27-0.82 e1-2.54-2.54 048048 x-0.250.25 n-22-64 Z-1.87-1.32 Z1-1.77-1.17 L3.153.403.652.302.602.90 JEITA STANDARD PACKAGE OUTLINE DRAWINGS DATE 01-03-16 SHEET 11/11 PACKAGE NAME P-ZIP/SZIP JEITA REGISTRATION NO. IC-7328-001 Group1Group2 EIAJ ED-7311-17 - 14 - EIAJ ED-7311-17 - 15 - COMMITTEE MEMBERS The Peripheral Package Subcommittee of the Technical Standardization Committee on Semiconductor Device Packages has mainly deliberated this standard. The subcommittee members are shown below. ChairmanELPIDA