Aruba 控制器升版作业程序.doc

Aruba controller firmware upgrade SOPBefore upgrade firmware Setup 1.收集AP上線數量 #show ap database long #show ap database-summarySetup 2.Backup flash #backup flash #copy flash: flashbackup.tar.gz tftp: X.X.X.X 20150528-flashbackup.tar.gzSetup 3.license export #show license #license export #copy flash: tftp: X.X.X.X 20150528-licenseSetup 4.export local-userdb and local-userdb-rap #show local-userdb#local-userdb export #copy flash: tftp: X.X.X.X 20150528-local-userdbSetup 5.檢查memory and flash storage #show memory (需 60MB) #show storage (需 75MB )Setup 6.檢查是否有額外需要備份的檔案(Ex:VRF)Upload firmwareSetup 1. controller upgrade to 6 #show image version例如：=(Aruba3600) #show image version-Partition : 0:0 (/dev/hda1) *Default boot*Software Version : ArubaOS (Digitally Signed - Production Build)Build number : 48122Label : 48122Built on : Thu Jan 15 18:50:32 PST 2015-Partition : 0:1 (/dev/hda2)Software Version : ArubaOS (Digitally Signed - Production Build)Build number : 34156Label : 34156Built on : Wed Jun 20 09:28:49 PDT 2012= #copy tftp: X.X.X.X ArubaOS_MMC_6_49356 system: partition X (upload firmware to 未使用system partition)After upgradeSetup 2. Master Controller必須先reload (5/31 執行) (Master)# reload After 5 minCheck system ,ap,image,license,userdb1. 開機成功#show image version2. #show ap database-summary (檢查 AP 上線數)AP更新成功：需15 mins3. #show license4. #show local-userdb5. #show ap database long只能有R , C , 2 or “空白”6. 院內無線網路連線測試7. #show user8. #show ap active9. #show profile-errors10. #show ap essidUpgrade firmware fail#reload# boot system partition x (原本firmware)# copy tftp: X.X.X.X flash: flashbackup.tar.gz# restore flash#reloadCheck system ,ap,image,license,userdb1. 開機成功，#show image version2. #show ap database-summary (檢查 AP 上線數)AP更新成功：需15 mins3. #show license4. #show local-userdb5. #show ap database long只能有R , C