98年及以前硕士论文中英文上网-欢迎访问浙江大学机械.doc

论文目录序号姓 名学 号论 文 题 目时 间导 师1.郁凯元7801电液伺服阀参数对电液震动台高频性能的影响Effect of the electro-hydraulic servo valve parameters on high frequency characteristic of the electro-hydraulic quiver 骆涵秀胡大宏2陈 行7802状态反馈在电液力控制系统中的应用研究Research on the application of the state feedback in the electro-hydraulic force-control system 骆涵秀3黄宜坚7901园筒形阻尼器的动态出流特性Characteristic of the Dynamic out-flow of the cylindric damper盛敬超蒋泳泉4章一明7902锥阀的液动力及其出流特性Characteristic of the hydraulic power and out-flow of the fastigiated valve 盛敬超蒋泳泉5徐 立8101状态观测器在电液振动台系统中的应用研究Applied research on the state observer in the electro-hydraulic quiver system骆涵秀杨余庆6陈 恳8102液压关节式机械手的MRAC自适应控制MRAC self-regulation control of the hydraulic arthral manipulator 林建亚7尤建忠8103微机PID控制器在电液速度伺服控制系统的应用Application of the microcomputer PID controller in the electro-hydraulic speed servo control system 骆涵秀陈 行8左 然8104液压机械手的滑觉控制林建亚9蔡亦纲8301冲击激励下的流体管道的动态特性分析Analysis of the dynamic characteristic of the liquid pipe under the prompting of the impulsion 盛敬超10周 洪8302路甬祥11吕 渊8303BJ2-H16型电液比例减压阀的开发及研究Development and research of BJ2-H16 electro-hydraulic appropriate pressure-reducing valve路甬祥12陈 鹰8304液压系统静态特性仿真计算通用软件开发The development of currency software of hydraulic system static character simulation calculation 路甬祥13段小中8305应用流体网络测量瞬时流量新提案理论与试验Experimentation and theory applied new overture of testing instantaneous flux using hydro-network盛敬超14刘玉祥8306液压系统特性测试抗非控制信号影响的处理Character test of hydraulic system - disposal of resist non-control signal effect杨世超路甬祥15梁祖扬新型液压电梯运行性能的研究Research of run capability of new type hydraulic elevator路甬祥曾义春16傅周东8401液压元件稳动态特性计算机辅助测试系统研究开发Development and research of computer aid test system about hydraulic component steady dynamic character路甬祥陈泳恩17刘锡辉8402比例控制放大器及比例电磁铁静特性动特性优化Proportion control magnifier and optimization of static character and move character of appropriate electro magnet 路甬祥18郑金传8403有关脉宽调制型电液数字阀装置的研究Research on the electro hydraulic digital valve device about PWM骆涵秀杨余庆19汤一平8404微机电液速度控制装置Device of speed control by computer 骆涵秀20赵福良8405平面关节型液压装置机器人设计与研究Design and research of the plane-joint hydraulic equipment robot 林建亚21杨剑鸣8406六自由度关节式机器人的计算机运动控制Computer Control movement of six freedom joint robot林建亚22葛建华8407电液比例变量泵的性能分析及优化Capability analysis and optimization of electro-hydraulic appropriate variable pump沈之敏23刘小平8408二位式脉冲串信号的设计及其动态流量测试中的应用Design of two-bit impulse bunch signal and appliance on the test of dynamic flux邓延光盛敬超24诸葛起8409输流管道流固耦合震动研究Research on the quiver of the liquid-solid coupling of the transport pipe 杨世超25俞浙青8501高压断路器液压操动机构的研究与改进Research and improvement of the high-handed breaker of hydraulic pressure operate machine 路甬祥寿松乔26陆监良8502休学27王庆丰8503带新型压力补偿器的反比例方向流量阀研究Research on the inverse proportional directional flux valve with new pressure compensator路甬祥吴根茂28金维连8504双向旋转电磁铁的有限元分析及特性优化FEA and characteristic optimization of the double-direction rotary electromagnet 路甬祥张光琼29 夏8505液压传动与控制的计算机辅助设计和教学演示软件Software of the CAD and teaching show of the fluid drive and control 路甬祥陈大中30吴小明8506热塑性塑料注射成型机电液比例控制系统的研究Research on the electro-hydraulic appropriate control system of the modeling machine for hot-plastic plastic 路甬祥凌俊杰31焦宗夏8507转博32马辛初8508研究生班33陈以平8509电液伺服板簧试验机的模型参考自适应控制 Referenced self-regulation control of the model of the electro-hydraulic servo board-spring testing machine 骆涵秀34李 鸣8510数控步进液压缸控制系统的开发研究Development of the control system of the digital control step hydraulic cylinder 骆涵秀35周训义8511机器人电液位置伺服控制系统及器件的研究Research on the servo control system and components of the electro-hydraulic position of the robot 36王荣良8512液压机冲载缓冲技术的研究Research on the buffer technology of the impactive loading of the hydraulic machine 37周 明8513装配机器人的控制系统及机器人语言编程Control system of the constructional robot and program of the robot language 林建亚38曹苏明8514远控平衡阀的性能研究及优化设计Research on the capability of the long-control balance valve and Design of its optimization 林建亚李 震39张 涛8515模态分析软件包的编制及其在液压元件动特性分析中的应用Compilation of the software package of the mode analysis and its application in the analysis of the dynamic characteristic of the hydraulic component 盛敬超蔡亦钢40曾国璋8516流体管道传输的震动及噪声控制Control on the quiver and noise of the pipe-transmit of the liquid 盛敬超41权 龙8517三通比例减压阀的开发及研究Development and analysis of the three-pathway appropriate decompressing valve 路甬祥郁凯元42陈亚蒙8518研究生班43赖小平8601对射流技术的研究Research on the shooting flow technology盛敬超蔡亦钢41陈大军8602超声大位移传感器研究Research on the ultrasonic long displacement sensors 路甬祥赵 阳 42王收军8603液压机电液比例位置控制技术的研究Research on the technology of the electro-hydraulic appropriate state control of the hydraulic machine 邵大文43张发林8604工业型电液比例变量泵的开发研究Development of the industrial electro-hydraulic appropriate flexible valve路甬祥吴根茂44孟坚平8605矿井提升机液压制动系统的研制Development of the hydraulic arrester system of the mine crane 沈之敏45魏建华8606磨床电液比例容积调速系统及电液比例微小流量调速阀的研究Research on the electro-hydraulic appropriate cubage-timing system and micro-flux timing valve of the grinder machine 46宋 为8607液压拄塞泵计算机辅助设计研究器及软件开发Development of the Studying equipment and software of the hydraulic pole-piston pump CAD47杨荣宝8608注塑机微机实时控制的应用Application of the microcomputer real-time control of the plastic-modeling machine 48任 志8609数字阀控制液压缸系统微型控制器的开发研究Development of the micro-controller of the hydraulic cylinder system controlled by digital valve 49许宏8610出国50顾越洲8611小型喷漆机器人的计算机控制Computer control of the small spray-paint robot 51唱一丹8612双向螺旋比例电磁铁及旋转伺服阀的研究Research on the double-direction screw appropriate electromagnetic iron and rotary servo valve 528613出国53刘温龙8614斜轴式轴向柱塞泵的分析研究及电液比例恒功率调节的实验研究Research on the inclined-axis lengthways piston-pump and Testing research on the electro-hydraulic appropriate constant power adjusting 54陈渊8615喷漆机器人规范化软件设计及其电液伺服系统的分析校正Design of the software of the standardization of the apray-paint robot and analysis and emendation of its electro-hydraulic servo system 55赵长春8701插装式液压机液压系统智能CAD研究及软件开发Research on the intelligent CAD and development of the software of the hydraulic system of the inserting hydraulic machine 56赵立宏8702注塑机过程参数闭环控制及特征研究Research on the close control and characteristic of the processing parameters of the plastic-modeling machine 57留沧海8703单片机控制的液压万能材料试验机电液控制系统的研究Research on the electro-hydraulic control system of the hydraulic omnipotent material-testing machine controlled by SCM58杨金明8704液压振动台的自适应控制Self-regulation control system of the hydraulic quavering platform 59王应建8705机器人电液位置伺服系统控制性能的研究Research on the control characteristic of the electro-hydraulic position servo system of robots 60陈金水8706电气比例阀加载的新型气缸测试台研究Research on the new cylinder-test platform loaded by electro-pneumatic appropriate valve 61郭家荣8707微计算机控制的恒压网络2次扭矩调节的基础研究Basic research on the second torque adjusting of the isobarically net controlled by the microcomputer 62潘国顺8708新型比例叶片泵工业型控制系统研究Research on the industrial control system of the new type appropriate lamina pump 63姜伟8709新型液压振动式打桩机New-type hydraulic quavering pile driver 648710没交65贾文沛8711汽车起重机吊臂伸缩系统及长油缸设计方法研究Research on the design of the flexible system of the sling-arm of the automobiles crane 66周见行8712微机控制液压锉削试验机的设计研究Design and research on the hydraulic cutting testing machine controlled by microcomputer 67周敏8713DSH模型库结构的改进及其在变量泵调节机构仿真中的应用Improvement of the DSH model-base structure and its application in the simulation of the adjusting structure of the flexible-flux pump68范素玲8714油液压体弹性模量的实验研究Testing research on the oil E69吕红兵8800新结构三通比例减压阀的开发和研究Development of the new structure three-pathway appropriate decompressing valve 70赵凡8801电液比例多路阀的开发和研究Development of the electro-hydraulic appropriate multi-pathway valve 71朱磊8802液体对向形成拉深液压机及其工艺性研究Research on the subtend-pull machine of liquid and its technical characteristic72姚建人8803DYBT-32/200电液比例调节阀的研制Research on the DYBT-32/200 electro-hydraulic appropriate adjusting valve 73王群8804插背阀液压系统主体阀块自动设计CAD研究Research on the automatic design CAD of the main blocks of the hydraulic system of the insert-back valve 74陶国良8805家具力学性能测试系统及数字式精密气动减压阀的研制Development of the testing system of the dynamic characteristic of the furniture and digital precise pneumatic decompressing valve 75王少丹8806脉宽调制式数字阀及其控制系统的研究Research of the PWM digital vale and its control system 768807直播778808没交78孟泉8809气动系统通用可编程控制器及数字式控制器的开发研究Development of the universal PLC and digital controller of the pneumatic system 79全力8810电液振动台的计算机模型参考自适应控制的研究Research on the referenced self-adapting control of the cyber-model of the electro-hydraulic vibratile platform 808811没交81尹志新8901ERV电反馈电液比例复合流量控制集成阀块的开发研究Development of the ERV electricity feedback electro-hydraulic appropriate complex flux-control integrated blocks 82陈钢8902智能型双向动态流量计的研究Research on the intelligent double directions dynamic flowmeter 83钟锦新8903液压万能试验机数字式电液比例控制系统的研究Research on the digital electro-hydraulic appropriate control system of the hydraulic omnipotent testing machine 84王长陶8904微机协联电液比例控制水轮机轮叶控制器的研究Research on the controller of the lamina of the microcomputer and electro-hydraulic appropriate control water wheel machine 85吴洪德8905微量阀稳定性研究Research on the stability of the micro-flux valve 86徐宋辉8906工程车辆自动调节控制技术的研究Research on the self-regulation control technology of the engineering vehicle 87高海燕8907液压机计算机控制系统的研究和开发Research and development of the computer control system of the hydraulic machine 88吴新友8908插装阀液压系统CAD研究及软件实现CAD research on the hydraulic system of the insert-load valve and realization of the software 89退学90沈波8910电液伺服系统实时控制CAD系统的研制Development of the real-time control CAD system of the electro-hydraulic servo system 91陈爱民8911数控油缸微控制器的开发研究Development of the micro-controller of the digital control oil-cylinder 92陈冰冰8912500KV超高压断路器液压系统分析及缓冲研究Analysis and buffer research on the 500KV super high voltages breaker hydraulic system 93杜德超8913磨床电液比例容积调速系统微机控制的研究Research on the microcomputer control of the electro-hydraulic appropriate cubage timing system of the grinder machine 94章国巨9001高空作业基于人体感受的运动轨迹微机控制Microcomputer control of the move track basing on people recept of the upper air work 95骆季皓9002液压电梯多级开关控制集成阀块的设计与研究Design and research on the multilevel switches control integrated manifold blocks of the hydraulic elevator96葛徐9003电液比例多路阀的研究Research on the electro-hydraulic appropriate multi-pathway valve97贺东湖9004小型喷漆机器人的微机控制Microcomputer control of the small spray-paint robots 98唐飚9005电-液高速高精度定位系统研究Research on the electro-hydraulic high speed high precision direction system99吴江宁9006电液伺服加载系统的研究Research on the electro-hydraulic servo loading system100裴翔9007工程图学参数化处理研究与软件实现Research on the parameter-managing of the engineer graphics and realization of the software 101朱捷9008六自由度电-机伺服模型机研制Development of the six-degree-of-freedom electro-mechanical servo model 102朱春龙9009阀配流液压振动冲击系统的研究Research on the flux-valve-distributing hydraulic quiver system 103刘国平9010液压机单电液控制系统研究与开发Research and development of the single electro-hydraulic control system of the hydraulic machine 104林富华9011微机小轮机调速器的研究Research on the microcomputer annulet machine actiyator105陈小红9012磨床电液比例容积节流调速系统及其微机控制的研究Research on the electro-hydraulic appropriate cubage throttling timing system of the grinder and its microcomputer control system 106仲华明9101液压电梯速度系统的微机控制研究Research on the microcomputer control of the hydraulic elevator speed system 107袁犹坤9102高速数字电液比例定位系统的研究Research on the high speed digital electro-hydraulic appropriate direction system 108高晖9103计算机监控系统研究Research on the computer monitoring system 109洑风根9104液压泵站计算机辅助设计方法研究与软件开发Research on the CAD method of the hydraulic pumping station and development of the software 110冉隆林9105液压系统温升的研究Research on the temperature change of the hydraulic system111严兴阳9106数字脉宽调制（PWM,PDM）电-气位置伺服系统的研究Research on the PWM,PDM electro-pneumatic position servo system112郭小和9107计算机辅助变结构设计方法的研究及液压缸变结构CAD系统的开发Research on the CAD of the flexible structure method and development of the hydraulic cylinder flexible structure CAD system 113张文进9108PWM数控宽速比微小流量比例阀及其控制器的研究Research on the PWM digital control wide speed-ratio micro-flux appropriate valve and its controller114方平9109超高压断路器新型液压操动机构系统分析及高速液压缸缓冲研究Analysis of the system of the new type hydraulic operating institution of the super-voltage breaker and research on the buffer of the high speed hydraulic cylinder 115直播116顾汉舜9111平面磨床电液比例容积调速系统微机变结构控制策略研究Research on the microcomputer flexible structure control strategy of the electro-hydraulic appropriate cubage timing system of the plane grinder machine 117杨晗峰9112微机比例/数字水轮机导叶控制系统的研究Research on the guiding lamina control system of the microcomputer appropriate/digital water wheel machine 118乔文刚9113大型塑料中空成型机型坯壁厚微机电液比例控制器的研制Development of the microcomputer electro-hydraulic appropriate controller of the model wall thickness of the big plastic middle empty machine119王旭东9114电液伺服疲劳试验机的计算及控制策略研究Research on the calculation and control strategy of the electro-hydraulic servo fatigue-testing machine120黄向东9201电液控制系统中电机械转换器的研究Research on the electro-mechanical exchanger in electro-hydraulic control system 121童红峰9202智能型高精度双向动态流量测量系统研制Development of the testing system of the intelligent high-precision double-direction dynamic flux 122麦春林9203气动按摩技术电-气比例流量阀Electro-pneumatic appropriate flux valve of the pneumatic massage technology 123没交124硕博连读125真彤9206被动式冲击液压缓冲器的应用研究Applied research on the passive impulsion hydraulic buffer 126周可忠9207超图文系统可视化CAI写作工具的研制及流体动力教学软件的实现Development of the visible CAI writing tools of the ultra-image-text system and realization of the teaching software of the hydrodynamics127周为民9208汽轮机电液调节系统及其电液转换器的研究Research on the electro-hydraulic adjusting system and its electro-hydraulic switch of the steamer machine 128刘宇9209上下位机分布式控制系统的设计和单缸性能改善的研究Design of the distributing control system of the up and down machines and research on the improvement of the single cylinder capability129徐兵9210液压电梯专用流量-电反馈电液比例流量阀的研究Research on the flux electronic feedback electro-hydraulic appropriate flux valve special for the hydraulic elevator130徐玲霞9211液压综合实验台计算机控制系统Computer control system for hydraulic general testing platform 131赵建玉9212电液比例容积调节调速系统微机变结构控制策略的研究Research on the microcomputer flexible structure control strategy of the electro-hydraulic appropriate cubage adjusting timing system 132沈恩源9213微机水轮机导叶控制系统研究Research on the guiding lamina control system of the microcomputer water wheel machine 133赵国军9214液压电梯速度反馈单片机控制系统的设计与研究Design and research on the SCM control system of the speed feedback of the hydraulic elevator134赵允9215举高工程作业车电液控制系统研究Research on the electro-hydraulic control system of the lifting engineering machine135金波9301硕博连读136顾临怡9302硕博连读137王岐9303超高压液压胀管器及其控制系统的研制开发Development of the super high pressure hydraulic expander and its control system 138郑庆良9304电反馈PWM数字多路阀的研究Research on the PWM digital multi-pathway valve of electronic feedback139硕博连读140钱建华9306液压系统动态温升的研究及应用Research and application of the dynamic temperature change of the hydraulic system141魏金岭9307电流变流体基础性能的研究Research on the changing liquid basic characteristic of the current 142杜铁流9308大型塑料中空成型机型坯壁厚微机控制器的研究Research on the microcomputer controller of the model wall thickness of the big plastic middle empty machine 143余越9309液压管道布置策略及其软件开发Arranging strategy of the hydraulic pipes and development of its software 144潘宏9310小波分析在液压系统状态检测中的应用Application of the small wave analysis in the state measure of the hydraulic system 145郭水明9311液压电梯专用速度电反馈比例流量阀的研究Research on the appropriate flux valve of the speed electro-feedback special for the hydraulic elevator 146于浩淼9312液压振动冲击器的理论及应用研究Research on the theory and application of the hydraulic quiver striker 147谢英俊9313大型工程机械液压系统的动态特性研究方法Studying method of the dynamic characteristic of the big engineering mechanical hydraulic system148徐臣9401汽轮机EHC专用快关阀及应用系统的研究Research on the fast shutting valve special for steamer machine EHC149戴旭涵9402磁致伸缩电-机械转换器的理论分析与实验Academic analysis and test of the magnetism flexible electro-mechanic switch150马兵9403面向对象的液压元件通用测试软件研制Development of the OO genera