DIN RAIL MOUNTING CLIP DIN轨卡扣,DIN轨爪.doc

产品简介DIN RAIL MOUNTING CLIP DIN轨卡扣，DIN轨爪主材使用铝合金，弹簧为高强度钢。用来连接开关电源、继电器、交换机等等需要安装在DIN轨上的设备。高度均统一为47mm，厚度均统一为2.5mm。宽度规格有：25mm、30mm、35mm、40mm、45mm、50mm、60mm、70mm、200mm，其他规格，比如配合国标/英标DIN轨的尺寸，可订制。产品详细信息DIN RAIL MOUNTING CLIP DIN轨卡扣，DIN轨爪主材使用铝合金，弹簧为高强度钢。用来连接开关电源、继电器、交换机等等需要安装在DIN轨上的设备。高度均统一为47mm，厚度均统一为2.5mm。宽度规格有：25mm、30mm、35mm、40mm、45mm、50mm、60mm、70mm、200mm，其他规格，比如配合国标/英标DIN轨的尺寸，可订制。3种颜色：黑色，银白色（铝本色），铁灰色。现货以黑色为主，其他2个颜色请购买前咨询。订制品可任选颜色25mm、30mm，35mm的零售价格是8元/个；尺寸越宽，价格越高，请购买前咨询。螺孔一般情况为沉头，也可以改为嵌入式螺母，但无成品，需订货。DIN Rail Mounting Clips (DINM12/13/15V2)DINM15V2-RC(rail not included)DINM15V2-RC Sturdy and Versatile Clips onto 35mm DIN rail Three different sizes availableScroll to BuySee Also:DIN Rail, More DIN ClipsGeneral DescriptionThese sturdy DIN rail mounting brackets come in handy for a wide variety of projects where standard DIN rail is used for mounting devices. The flat mounting surface and a total of five mounting holes make this clip versatile for mounting devices that do not have their own DIN rail mounting clip. All of these clips are for standard 35mm DIN rail, and work with rail depths of 7.5mm or greater. These clips are sometimes known as DIN rail mounting plates.These clips are very easily attached and detached from the DIN rail. When on the rail, the clip grips the rail on both the top and bottom lips of the rail. The fixed (not spring-loaded) tab of the clip should go on the top so that it bears the load. The spring-loaded tab should go on the bottom. To remove the DIN clip from the rail, simply push upwards on the DIN clip (thereby compressing the springs in the bottom), pivot the top of the clip off of the rail, and then move the whole clip down to also release the bottom of the clip. No screwdrivers or special tools are required.This style of clips come in three different sizes. Please see datasheets below for dimensions.We also offer another style of narrower, taller clips as part numberDINM01.Mounting HardwareThe screw holes in this clip are non-threaded, nor are they intended to be threaded into. Intended usage is for the screw to pass through the clip and thread into the device being mounted. The holes allow up to a #8 machine screw or a #6 sheet metal screw to pass through (a #8sheet metalscrew will NOT pass cleanly through the holes, although a #8machinescrew does fit). Note that the surface of the device being mounted to the DIN clip should be flat and cover the DIN clip in order to keep the springs and latch portion of the clip securely in place.Winford Engineering offers mounting screws, washers, and nuts for use with this clip. This hardware isRoHS Compliantand affordably priced. See thePricing and Orderingtables below for hardware pricing and options.DINM15 Clip TypesThe DINM15-RC and DINM15V2-RC clips are very similar to each other. The difference is a slight change in mounting hole locations. The DINM15V2-RC is the newer model and is recommended for new applications, but the DINM15-RC is also available for legacy designs. We will continue to stock both part numbers. For details of the differences between these parts, please reference the data sheets below.Product DocumentsPart #DescriptionData SheetCAD ModelDINM12-RC20mm widthDINM13-RC35mm widthDINM15-RC(LEGACY designs) 48mm widthDINM15V2-RC(NEW designs) 48mm widthPricing and OrderingProduct #DescriptionQuantity PricingRoHSBuy Now1+10+100+DINM12-RCDIN Rail Mounting Clip, Black, 20mm width, RoHS$1.75$1.70$1.60Yes窗体顶端窗体底端DINM13-RCDIN Rail Mounting Clip, Black, 35mm width, RoHS$1.80$1.75$1.65Yes窗体顶端窗体底端DINM15-RC(Legacy) DIN Rail Mounting Clip, Black, 48mm width, RoHS$1.89$1.85$1.75Yes窗体顶端窗体底端DINM15V2-RCDIN Rail Mounting Clip, Black, 48mm width, RoHS$1.89$1.85$1.75Yes窗体顶端窗体底端Mounting HardwareMounting hardware compatible with these clips. 7/16 or 1/2 screw length recommended for mounting to 0.062 panel or PCBs using nuts.Product #DescriptionQuantity PricingRoHSBuy Now1+5+10+25+SCMAFP-6-A-0.375-100Screw, Machine, Flat Head, Phillips, 82 deg Taper, #6-32, 3/8 Length, Bag of 100$3.80$3.40$2.90$2.60Yes窗体顶端窗体底端SCMAFP-6-A-0.4375-100Screw, Machine, Flat Head, Phillips, 82 deg Taper, #6-32, 7/16 Length, Bag of 100$6.00$5.60$5.10$4.80Yes窗体顶端窗体底端SCMAFP-6-A-0.5-100Screw, Machine, Flat Head, Phillips, 82 deg Taper, #6-32, 1/2 Length, Bag of 100$3.80$3.40$2.90$2.60Yes窗体顶端窗体底端SWLI-6-A-100Washer, #6, Lock, Internal Tooth, Bag of 100$3.60$3.10$2.60$2.30Yes窗体顶端窗体底端SN-6-32-A-100#6-32 Hex Nut, Bag of 100$3.70$3.20$2.70$2.40Yes窗体顶端窗体底端All of the above items are normally stocked.Please call us if you need to verify ava