proe齿轮参数中英对照.xls

英英文文齿齿轮轮参参数数中中文文齿齿轮轮参参数数 number of teeth齿数 normal module法向模数 transverse module端面模数 addendum modification factor变位系数 reference diameter分度圆直径 tip diameter齿顶圆直径 root diameter齿根圆直径 base diameter基圆直径 prefinishing diameter剃前渐开线起始圆直径 control form diameter渐开线检查有效直径 effective outside diameter渐开线终止圆直径 lead导程 normal pressure angle 法向压力角 transverse pressure angle端面压力角 helix angle分度圆螺旋角 base helix angle基圆螺旋角 hand of helix旋向 circular thickness on Dp分度圆上弧齿厚 chordal addendum弦齿高 normal circular thickness on Dp after finishing and heat treatment分度圆弦齿厚 base tangent measurement after finishing and heat treatment公法线长度 dimension over f diameter balls or pin after finishing and heat treament跨棒距 backlash总侧系 center distance中心距 tool tip radius刀具齿顶圆角半径 tooth tip fillet angle refered to axis齿顶倒角 number of teeth of mating gear配对齿轮齿数 Toothed gear Gear齿轮 Gear pair齿轮副 Gear pair with parallel axes平行轴齿轮副 Gear pair with intersecting axes相交轴齿轮副 Train of gears齿轮系 Planetary gear train行星齿轮系 Gear drive Gear transmission齿轮传动 Mating gears配对齿轮 Pinion小齿轮 Wheel Gear大齿轮 Driving gear主动齿轮 Driven gear从动齿轮 Planet gear行星齿轮 Planet carrier行星架 Sun gear太阳轮 Ring gear Annulus gear内齿圈 External gear外齿轮 Internal gear内齿轮 Centre distance中心距 Shaft angle轴交角 Line of centres连心线 Speed reducing gear pair减速齿轮副 Speed increasing gear pair增速齿轮副 Gear ratio齿数比 Transmission ratio传动比 Axial plane轴平面 Datum plane基准平面 Pitch plane节平面 Transverse plane端平面 Normal plane法平面 Reference surface分度曲面 Pitch surface节曲面 Tip surface齿顶曲面 Root surface齿根曲面 Basic tooth profile基本齿廓 Basic rack基本齿条 Counterpart rack产形齿条 Generating gear of a gear产形齿轮 Generating flank产形齿面 Tooth space齿槽 Right hand teeth右旋齿 Left hand teeth左旋齿 Gears with addendum modification 变位齿轮 Addendum modification factor变位系数 X gears X gear pair with reference centre distance高度变位圆柱齿轮副 X gear pair with modified centre distance角度变位圆柱齿轮副 X gear pair without shaft angle modification高度变位锥齿轮副 X gear pair with shaft angle modification角度变位圆柱齿轮副 Modification coefficient变位系数 Addendum modification变位量 Addendum modification coefficient径向变位系数 Centre distance modification coefficient中心距变位系数 Cylindrical gear圆柱齿轮 Tip circle顶圆 Root circle根圆 Pitch齿距 Angular pitch齿距角 Base tangent length公法线长度 Reference diameter分度圆直径 Pitch diameter节圆直径 Fillet radius齿根圆角半径 Tooth depth齿高 Working depth工作高度 Addendum齿顶高 Dedendum齿根高 Chordal height弦齿高 Constant chord height固定弦齿高 Facewidth齿宽 Effective facewidth有效齿宽 Transverse tooth thickness端面齿厚 Normal tooth thickness法向齿厚 Transverse base thickness端面基圆齿厚 Normal base thickness法向基圆齿厚 Transverse chordal tooth thickness端面弦齿厚 Constant chord固定弦齿厚 Crest width端面齿顶厚 Normal crest width法向齿顶厚 Transverse spacewidth端面齿槽宽 Normal spacewidth法向齿槽宽 Tooth thickness half angle齿厚半角 Spacewidth half angle槽宽半角 Nominal pressure angle齿形角 Arc contact worm hollow flank worm ZC worm圆弧圆柱蜗杆 Enveloping worm with straight line grneratrix TA worm直廓环面蜗杆 Planar worm wheel P worm wheel平面蜗杆 Planar double enveloping worm TP worm平面包络环面蜗杆 Planar double enveloping worm wheel TP worm wheel平面二次包络蜗杆 Toroid enveloping worm wheel TK worm wheel锥面包络环面蜗杆 Toroid enveloping worm hich involute holicoid generatrix TI worm渐开线包络环面蜗杆 Spiroid锥蜗杆 Spiroid gear锥蜗轮 Spiroid gear pair锥蜗杆副 Mid plane中平面 Prolate hypocycloid长幅内摆线 Curtate hypocycloid短幅内摆线 Involute 渐开线 Involute to a circle Prolate involute延伸渐开线 Curtate involute缩短渐开线 Spherical involute球面渐开线 Involute helicoid渐开螺旋面 Screw helicoid阿基米德螺旋面 Spherical involute helicoid球面渐开螺旋面 Toroid圆环面 Generant of the toroit圆环面的母圈 Middle circle of the toroid圆环面的中性圈 Middle plane of the toroid圆环面的中间平面 Inner circle of the toroid圆环面的内圈 Meshing interference啮合干涉 Cutter interference切齿干涉 Profile modification 齿廓修型 Profile correction Tip relief修缘 Root relief修根 Axial modification 齿向修形 Longitudinal correction End relief齿端修薄 Crowning鼓形修整 Crowned teeth鼓形齿 Undercut挖根 Instantaneous axis瞬时轴 Point of contact瞬时接触点 Line of contact瞬时接触线 Transverse path of contact端面啮合线 Surface of action啮合曲面 Plane of action啮合平面 Zone of action啮合区域 Total arc of transmission总作用弧 Transverse arc of transmission端面作用弧 Overlap arc纵向作用弧 Total angle of transmission总作用角 Transverse angle of transmission端面作用角 Overlap angle纵向作用角 Total contact ratio总重合度 Transverse ratio端面重合度 Overlap ratio纵向重合度 Standard gears标准齿轮 X gero gear非变位齿轮 Referencr centre distance标准中心距 Nominal centre distance名义中心距 Reference cylinder分度圆柱面 Pitch cylinder节圆柱面 Basic cylinder基圆柱面 Tip cylinder齿顶圆柱面 Root cylinder齿根圆柱面 Pitch point节点 Pitch line节线 Reference circle分度圆 Pitch circle节圆 Basic circle基圆 Locating face定位面 Outer cone distance外锥距 Inner cone distance内锥距 Mean cone distance中点锥距 Back cone distance背锥距 Locating distance安装距 Tip distance crown to back轮冠距 Apex to crown冠顶距 Offset偏置距 Offset of tooth trace齿线偏移量 Reference cone angle分锥角 Pitch cone angle节锥角 Tip angle顶锥角 Root angle根锥角 Back cone angle背锥角 Addendum angel齿顶角 Dedendum angle齿根角 Pressure angle at a point任意点压力角 Spiral angle at a point任意点螺旋角 Mean spiral angle中点螺旋角 Outer spiral angle大端螺旋角 Inner spiral angle小端螺旋角 Worm蜗杆 Worm wheel蜗轮 Worm gear pair蜗杆副 Cylindrical worm圆柱蜗杆 Cylindrical worm pair圆柱蜗杆副 Enveloping worm环面蜗杆 Enveloping worm pair环面蜗杆副 Straight sided axial worm ZA worm阿基米德蜗杆 Involute helicoid worm ZI worm渐开线蜗杆 Straight sided normal worm ZN worm法向直廓蜗杆 Milled helicoid