205 CBB21电容规格书 (小体积).doc

编号： YC-07 共 3 页薄膜电容器规格书FILM CAPACITOR SPECIFICATION型 号：CBB21TYPE： CBB21 供 方： 需 方：名 称长兴友畅电子有限公司名 称地 址浙江省长兴县白岘工业园区地 址电 话传 真邮 编313118邮 编联系人罗浩民联系人技术代表（签字）刘宇技术代表（签字）二O一四年七月五日(2014-07-05)CBB21型金属化聚丙烯膜介质直流固定电容器CBB21 METALLIZED POLYPROPYLENE FILM CAPACITOR 1 主要应用Typical applications 广泛用于直流、脉动、高频较大电流电路Widely used in DC, pulse, high frequency and high current circuits. 2 一般数据General Technical Data电介质Dielectric: 聚丙烯膜Polypropylene film电极Plates: 真空蒸渡的金属化层Metal layer deposited by evaporation under vacuum卷绕Winding: 无感型Non-inductive type引线leads: 镀锡线Tinned wire 外包封Protection: 阻燃环氧树脂包封，符合UL94 VO类 Flame retardant epoxy resin coating according to UL94 VO 标志Marking: 商标Manufactures logo , 型号series, 电容量capacitance, 偏差tolerance, 额定电压rated voltage3 性能特性 Characteristics3.1 气候类别Climate Category ：40/085/213.2 额定电压Rated Voltage ：100V、160V、250V、400V、630V、1000V3.3 电容量范围Capacitance Range：0.013.33.4 容量偏差Capacitance Tolerance ：J（5%）、K（10%）、M（20%）3.5 耐电压Withstand Voltage：1.75UR 1s 3.6 绝缘电阻Insulation Resistance (引出极间Between Terminals) ：CR0.33，60000M CR0.33，20000s（at 60s and 20）3.7 损耗角正切 Dissipation factor：0.0008 (at 1KHz and 20)4 外形及尺寸External shape dimensions 表1 外形及规格尺寸 table 1 External shape dimensions外 形 图 External shape型 号 规 格 spec尺寸(mm) dimensions(mm)WHTPdCBB21-400V-20516.514.59.5150.8根据需要,可增加其他电容量规格产品 If you want other specs, please contact with us. 5 测试条件Measuring conditions测试在标准大气条件即温度：1535、湿度：45%75%、气压：86106KPa下进行，在有争议时，应采用仲裁条件即温度：201、湿度：63%67%、气压：86106KPa。Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests is as follows: Ambient temperature: 1535; Relative humidity: 45%75%; Air pressure: 86106KPa。If there may be any doubt on the results, measurements shall be made within the following limits. Ambient temperature: 201; Relative humidity: 63%67%;Air pressure: 86106KPa。 6 测试方法Measuring ways and means表 2 table 2no测试项目Items测试器具ApplianceILAQL性能要求Specifications1外观检查Appearance inspecting目测 All eyesS-42.5%无可见损伤，标志可辩No damage, The marking shall be vindicable2尺 寸 dimensions游标卡尺Vernier calipers符合表1中规定Table 1shall be satisfied3电容量 CapacitanceZL-5型LCR智能数字电桥测试仪 ZL-5 pattern LCR testing instrument1.0%在规定偏差内 Capacitance tolerance shall be in fixed values4损耗角正切Dissipation factor符合3.7条 Clause3.7 shall be satisfied5耐电压（极间）Voltage proof耐电压测试仪 CY2671型CY2671 pattern voltage proof testing instrument 按3.5条无击穿或飞弧Clause 3.5 shall be satisfied,there shall be no dielectric breakdown or other damage.6绝缘电阻（极间）Insulation resistance(the leads)绝缘电阻测试仪 NF2511型NF2511 pattern Insulation resistance testing instrument符合3.6条Clause3.6 shall be satisfied注Note： 1)具体测试参照GB269390，测试器具可用功能相同的其他型器具 Detailed Measuring ways and means refer to GB2693-90,measure appliance may be replaced by the others as same function 2) IL、AQL检查水平选自GB2828-87 The check standard select from GB2828-87 3) 电容量、损耗角正切测试电压：1.8Vrms The testing voltage of Capacitance, Dissipation fact