ESRITopologyRuleType简述.doc

序号esriTopologyRuleType英文描述中文描述图片描述(红色为拓扑错误)ArcGIS Desktop中对应的命令1esriTRTAnyThe rule type can be any. Used when querying2-27定义的规则中任何一种，一般在查询时使用。请注意，不要将esriTRTAny直接作为拓扑规则进行赋值给ITopologyRule使用，会抛出自动化的错误。无无2esriTRTFeatureLargerThanClusterToleranceThe rule is a feature to be deleted is smaller than the cluster tolerance rule.任何一个拓扑都具有的内在规则，它是定义在拓扑容限之内的要素被删除的规则。无无3esriTRTAreaNoGapsThe rule is an area-no gap rule.针对面状图层内的，是定义图层内面状要素间没有缝隙的规则，。Must Not Have Gaps4esriTRTAreaNoOverlapThe rule is an area-no overlap rule.针对面状图层内的，是定义图层内面状要素间没有重叠的规则，。Must Not Overlap5esriTRTAreaCoveredByAreaClassThe rule is an area covered by area class rule针对面状图层间的，定义图层间区域要素覆盖的规则。如果第二个图层中的面要素不为第一个图层中的任一面要素所覆盖的话，视为拓扑错误。Must be covered by Feature Class of 6esriTRTAreaAreaCoverEachOtherThe rule is an 2 areas cover each other rule针对面状图层间的，定义两个图层间的区域要素必须互相覆盖的规则,这个规则实际上要素两个图层间的要素是一样的。Must Cover each other7esriTRTAreaCoveredByAreaThe rule is an area covered by area rule针对面状图层间的，定义图层间区域要素覆盖的规则。如果第一个图层中的区域要素不为第二个图层中的任一区域要素所包含的话，视为拓扑错误。Must Be Covered By8esriTRTAreaNoOverlapAreaThe rule is an area covered by area rule针对面状图层间的，定义图层间区域要素不能互相覆盖的规则。Must Not Overlap with9esriTRTLineCoveredByAreaBoundaryThe rule is a line covered by area boundary rule针对线状图层与面状图层间的，定义一个线状图层的线要素必须为一个面状图层的面要素边界所覆盖的规则。线要素的任一部分如果跟面要素边界不符合，都视为拓扑错误。Must Be Covered by Boundary Of10esriTRTPointCoveredByAreaBoundaryThe rule is a point covered by area boundary rule针对点状图层与面状图层间的，定义一个点状图层的点要素必须为一个面状图层的面要素边界所覆盖的规则。点要素的任一部分如果跟面要素边界不符合，都视为拓扑错误。简单地说，点必须全部落在面要素边界上的规则。Must Be Covered by Boundary Of11esriTRTPointProperlyInsideAreaThe rule is a point properly inside area rule针对点状图层与面状图层间的，定义点状图层的要素必须落在面状图层要素之内的规则。任何落上面状图层中要素边界或者之外的都视为拓扑错误。Must Be Properly Inside12esriTRTLineNoOverlapThe rule is a line-no overlap rule针对线状图层内的，定义线要素之间不互相重叠的规则。互相叠盖的部分都视为拓扑错误。Must Not Overlap13esriTRTLineNoIntersectionThe rule is a line-no intersection rule针对线状图层内的，定义线状要素间不能相交的规则。Must Not Intersect14esriTRTLineNoDanglesThe rule is a line-no dangles rule针对线状图层内的，定义线不允许有悬挂节点存在的规则。Must Not Have Dangles15esriTRTLineNoPseudosThe rule is a line with no pseudo-nodes rule针对线状图层内的，定义线不允许假节点存在的规则。Must Not Have Pseudo16esriTRTLineCoveredByLineClassThe rule is a line covered by line class rule针对线状图层间的，定义一个线状图层的要素为另一个线状要层的要素所覆盖的规则。第一个图层中的线要素如果不为第二个图层中的线要素所覆盖，就视为拓扑错误。Must be covered by Feature Class of 17esriTRTLineNoOverlapLineThe rule is a line-no overlap line rule针对线状图层间的，定义两个线要素图层之间互相叠盖的规则。Must Not Overlap with18esriTRTPointCoveredByLineThe rule is a point covered by line rule针对点状图层与面状图层间的，定义点必须为线所覆盖的规则。Point Must Be Covered By Line19esriTRTPointCoveredByLineEndpointThe rule is a point covered by line endpoint rule针对点状图层与面状图层间的，定义点必须在线的端点上的规则。Must Be Covered By EndPoint Of20esriTRTAreaBoundaryCoveredByLineThe rule is an area boundary coverered by line rule针对面状图层与线状图层间的，定义面状图层面要素边界必须为线要素所覆盖的规则。Must Be Covered By Boundary Of21esriTRTAreaBoundaryCoveredByAreaBoundaryThe rule is an area boundary covered by area boundary rule针对面状图层间的，定义面的边界必须为另一个面边界所覆盖的规则。Area Boundary Must Be Covered By Boundary22esriTRTLineNoSelfOverlapThe rule is a line-no self overlap rule针对线状图层内的，定义线要素自身不能重叠的规则。Must Not Self-Overlap23esriTRTLineNoSelfIntersectThe rule is a line-no self intersect rule针对线状图层内的，定义线要素不能自相交的规则，是针对图层内的。Must Not Self-Intersect24esriTRTLineNoIntersectOrInteriorTouchThe rule is a line-no intersect or interior touch rule针对线状图层内的，定义线不能相交以及接触的规则。图层内的线要素必须与同一图层内的线要素在端点处接触。任何互相重叠或者点的相交都视为拓扑错误。Must Not Intersect Or Touch Interior25esriTRTLineEndpointCoveredByPointThe rule is a line endpoint covered by point rule针对线状图层与点状图层间的，定义线要素的端点必须为点所覆盖的规则。 End Point Must Co