NHEUT_SystemGuide_Y0105_DisplayYardAllocationInation_v1_bilingual显示分配器数据.docx

New Horizon End User Training - System GuideY0105: 显示分配器数据Display Yard Allocation Information_Y0105: 显示分配器数据Display Yard Allocation Information1. 系统指南应用 System Guide Usage此系统指南说明如何完成以下的系统操作：This document illustrates how to complete the system transaction(s) below: XPS的选择和显示分配组、分配范围之信息有助专注于特定的分配特点。XPS features for selecting and displaying information for allocation groups and ranges helps you focus on specific allocation. 完成此系统操作可让:By completing this transaction, yard planners can: 快速诊断配位失败Quickly diagnose decking failures2. 系统 System XPS3. 示意例子 Illustration Scenario所有分配器数据显示设定均可应用本文所阐述的系统操作方法。因流程步骤相似，本文只图解说明设定显示EXPORT的建立方案。The system transaction(s) illustrated in this document can apply to all Yard Allocation Information Display setting. Due to the similarity in processing procedures, only the scenarios of Display Export Information are used for screen dump illustration. 4. 前提条件 Prerequisites在这套系统操作之前，以下流程或步骤必须完成：Before this system transaction, the process/ procedure below must be completed: N/A_Page 5 of 55. 分步指南 Step-by-Step Guide 5.1于分配器内显示分配组及范围 Displaying groups and ranges in Yard Allocation第1步:打开分配器 于业务类别之下拉选单中选择IMPORT Open the Yard Allocations window Select the Import from catrgory pull-down menus. 第2步:于业特别的之下拉选单中选择显示范围Select Show Range in Special pull-down menu 完成:每分配组之指派分配范围将全面显示Assigned range will display under each group.5.2显示分配信息 Information pop-up for allocations第1步:打开分配器 点击目标分配组 右击鼠标 选择Properties Open the Yard Allocations window Click Target Allocation Group Right Click Mouse Select Properties.完成:该分配组之相关信息窗口弹出The relevant information about the target allocation group information window pop-up 5.3于鸟瞰图显示分配范围 Displaying Allocation Ranges in Yard View第1步:打开鸟瞰图 打开分配器 于Color by选择不同属性 Open Yard View Open Yard Allocations window Select Different Category.完成:各业务类型之分配组及分配范围以不同颜色显示The allocation group / range of all category display in different colors.文档控制 Document Control编写人Written By： Cha