IAR 6 20编译错误.docx_第1页
IAR 6 20编译错误.docx_第2页
IAR 6 20编译错误.docx_第3页
IAR 6 20编译错误.docx_第4页
IAR 6 20编译错误.docx_第5页
免费预览已结束,剩余1页可下载查看

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

IAR 6.20编译错误清单1、 错误描述:Tool Internal Error:Internal Error: CoreUtil/General: Access violation (0xc0000005) at 007588A5 (reading from address 0x0)Internal Error: CoreUtil/General: Access violation (0xc0000005) at 007588A5 (reading from address 0x0)Error while running C/C+ Compiler错误原因:High配置设置为Size,应该为Low2、 错误描述:Fatal ErrorPe1696: cannot open source file inc/hw_types.h E:StellarisWareM3_9D92boardsdk-lm3s9b96boot_demo2boot_demo2.c 25错误原因:C/C+ Complier(Assember)-Preprocessor-Additional include directories:$PROJ_DIR$.$PROJ_DIR$.$PROJ_DIR$.3、 错误描述:Fatal ErrorPe1696: cannot open source file lwip/opt.h E:StellarisWareM3_9D92utilslwiplib.h 44错误原因:C/C+ Complier-(Assember)Preprocessor-Additional include directories:$PROJ_DIR$.third_partylwip-1.3.2apps$PROJ_DIR$.third_partybget$PROJ_DIR$.third_partylwip-1.3.2portsstellarisinclude$PROJ_DIR$.third_partylwip-1.3.2srcinclude$PROJ_DIR$.third_partylwip-1.3.2srcincludeipv4$PROJ_DIR$.third_partylwip-1.3.2srcincludelwip$PROJ_DIR$.third_party4、 错误描述:Fatal ErrorPe035: #error directive: Unrecognized COMPILER! E:StellarisWareM3_9D92boardsdk-lm3s9b96driversset_pinout.h 59Error while running C/C+ Compiler错误原因:C/C+ Complier-(Assember)Preprocessor-Defined symbols: ewarm5、 错误描述:ErrorPe020: identifier ROM_pvAESTable is undefined E:StellarisWareM3_9D92third_partyaesaes.c 319错误原因:6、 错误描述:ErrorLi005: no definition for main referenced from cmain.o(rt7M_tl.a)Error while running Linker错误原因:定义函数:int main(void) return (0); 7、 错误描述:ErrorLi005: no definition for main referenced from cmain.o(rt7M_tl.a)Error while running Linker错误原因:如果是库是库函数,在:General Options-Output-Output file:选择:Library项4、 错误描述:Fatal ErrorPe1696: cannot open source file uip.h E:StellarisWareM3_9D92third_partyuip-1.0appsdhcpcdhcpc.c 37错误原因:5、 错误描述:错误原因:$PROJ_DIR$.third_partylwip-1.3.2apps$PROJ_DIR$.third_partybget$PROJ_DIR$.third_partylwip-1.3.2portsstellarisinclude$PROJ_DIR$.third_partylwip-1.3.2srcinclude$PROJ_DIR$.third_partylwip-1.3.2srcincludeipv4$PROJ_DIR$.third_party$PROJ_DIR$.third_partyuip-1.0$PROJ_DIR$.third_partyuip-1.0uip$PROJ_DIR$.third_partyuip-1.0apps$PROJ_DIR$.third_partyspeex-1.2rc1include$PROJ_DIR$.third_partyspeex-1.2rc1includespeex$PROJ_DIR$.third_partyspeex-1.2rc1stellaris6、 错误描述:Fatal ErrorPe035: #error directive: You now need to define either FIXED_POINT or FLOATING_POINT E:StellarisWareM3_9D92third_partyspeex-1.2rc1libspeexarch.h 65错误原因:7、 错误描述:Fatal ErrorPe035: #error directive: Unrecognized/undefined driver for DISK0! E:StellarisWareM3_9D92third_partyfatfsportdual-disk-driver.c 62Error while running C/C+ Compiler错误原因:UART_BUFFEREDDISK0_DK_LM3S9B96DISK1_USB_MSCINCLUDE_BGET_STATS8、 错误描述:ErrorPe020: identifier ROM_pvAESTable is undefined E:SWM3_9D92(6.20)third_partyaesaes.c 359Error while running C/C+ Compiler错误原因:10、 错误描述:Fatal ErrorPe035: #error directive: You now need to define either FIXED_POINT or FLOATING_POINT E:SWM3_9D92(6.20)third_partyspeex-1.2rc1libspeexarch.h 65Error while running C/C+ Compiler错误原因:11、 错误描述:ErrorLi005: no definition for ROM_SysCtlClockSet referenced from E:SWM3_9D92(6.20)boardsdk-lm3s9b96safertos_demoDebugObjsafertos_demo.oErrorLi005: no definition for ROM_FlashUserGet referenced from E:SWM3_9D92(6.20)boardsdk-lm3s9b96safertos_demoDebugObjlwip_task.oErrorLi005: no definition for ROM_IntPrioritySet referenced from E:SWM3_9D92(6.20)boardsdk-lm3s9b96safertos_demoDebugObjlwip_task.oErrorLi005: no definition for ROM_GPIOPinTypeGPIOOutput referenced from E:SWM3_9D92(6.20)boardsdk-lm3s9b96safertos_demoDebugObjled_task.oErrorLi005: no definition for ROM_GPIOPinWrite referenced from E:SWM3_9D92(6.20)boardsdk-lm3s9b96safertos_demoDebugObjled_task.oErrorLp011: section placement failed: unable to allocate space for sections/blocks with a total estimated minimum size of 0x11e54 bytes in (total uncommitted space 0x10000).Error while running Linker错误原因:12、 错误

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论