铣刀磨刀机技术参数.doc

元禄亦端铣刀磨刀机机台功能1.专门研磨13-32mm的平底铣刀，精准快速。2.钨钢铣刀请选用SD钻石砂轮，高速钢铣刀请选用CBN砂轮，二种砂轮均不可研磨钻石涂层刀具（石墨铣刀）。3.一片砂轮即可研磨2刃、3刃、4刃、6刃平底铣刀。4.可控制螺旋角大小对磨刀的影响，并可控制刀尖的锋利度及刀锋厚度。5.面铣加工时，请将研磨角度调整为3-4，利于排屑，减小阻抗。6.具有一刃过中心、两刃过中心、两刃都不过中心等三种中心静点磨法。7.垂直校刀、圆弧磨法，三步到位，精准快速。8.配件少、装夹快、研磨效率高。9.可重复修磨，提高钻头的加工效率和钻头的利用率，节约钻头的刀具成本和磨刀时间。The machinefunctionFlat bottomedcutter1 13-32mmspecialgrinding,precision fast.2tungsten steel milling cutterchooseSD diamond grinding wheel,high-speed steelcutterchooseCBN wheel,twowheelgrindingdiamondcoated cutting toolsare notavailable(graphitecutter).3awheelgrinding 2 blade,3,4,6edgeedgeedgeflat end mill.4controleffects of spiralangle on theknife,sharpnessandblade thicknessand cancontrolthe.The 5face milling,pleasebegrinding angleadjustment for 3 -4 ,conducive to the chip,reduce impedance.The 6has anedgeover the center,two edgedover the center,two edgedbutCenterthreecenterstaticpoint grinding.7 verticalcutter calibration,circulargrinding method,threestep,accurate and fast.8fewer parts,clampingfast,high grinding efficiency.9repeatedgrinding,improve theprocessing efficiency and thedrillbitrate,save thebittool costandgrinding time.技术参数标配端铣刀磨刀机 YN-03B 13-32mm研磨刀具：端铣刀、平刀、立铣刀刀具材质：钨钢、高速钢研磨尺寸：13-32mm 刀具刃数：2刃/3刃/4刃/6刃研磨角度：0- 3研磨方法：角度磨法电 源：220V功 率：400W转 数：55005% R.P.M外形尺寸：350250275机台重量：23kg标准配件夹头螺帽：ER40-4刃（1个） ER40-6刃（1个） 弹性筒夹：ER40-13/16/