UL 8750及UL1598的测试标准.doc

现在LED路灯UL认证，依据的标准就是UL8750和UL1598.了解标准的要求，就可以在研发、生产、采购等环节做好控制，少走弯路。所以知道UL8750标准的内容是必要的哦。把前言给大家看看，如果有需要的，找我哦。2007年1月31日1主题： 8750发布号： 1LED 光源用于照明产品的检测大纲2007年1月31日概要：这是LED 光源用于照明产品的检测大纲的初稿。该大纲包括了LED的组成部分：如LED模块、LED 排列、电源和控制电路等。也包括终端产品制造商制造的LED光源和作为终端产品内部部件的LED光源，或者由一个制造商生产的LED光源的分立元件提供给另外的制造商的照明产品。UL的前言不在本大纲中列出。关于在检测大纲中使用和应用要求的信息以及UL前言的现行版本，可以在UL的网站中查找：/ulforeword.html 章节3.14.1，3.14.2和表3.1，3.2的内容取材于IEC60950-1，信息工业设备-安全-第一部分：总体要求，1999-01版里的内容。该内容的使用得到了IEC和美国国家标准委员会（ANSI）的同意。IEC的版权资料是经过ANSI允许以后的再加工。对IEC资料的任何部分的修改都要与ANSI联系。IEC60950-1的影印本可以到ANSI购买，地址是： 纽约州纽约市西42街11好，邮编10036， 电话：212-642-4900目录：基本介绍：1、 范围2、 概述：2.1 组成部分2.2 测量单位2.3 参考文献3、 定义4、 总体要求和本检测大纲的使用4.1 概述4.2 LED模块结 构5、 环境因素6、 机械结构6.1 概述6.2 金属外壳6.3 外壳和电气绝缘的聚合材料6.4 隔板6.5 传导保护6.6 应力释放7、电气结构7.1 概述7.2 危险有电部件的可接近性7.3 非裸露接线终端的危险有电部件7.4 裸露的接线终端7.5 内部线7.6 供应与负荷连接7.7 电路的分开7.8 绝缘材料7.9 印刷电路板7.10 电组建的分隔7.11 电路部件7.12 保护件8. LED电源8.1 概述8.2 电源外壳8.3 电源输入8.4 转换器9、LED和控制模块9.1 概述9.2 外壳9.3 外壳口/孔9.4 LED组件和控制电路模块的使用条件性 能10、性能测试10.1 概述10.2 插入测试10.3 LED 模块正常工作温度测试10.4 绝缘电压耐压测试11、特殊测试11.1 概述11.2 不可靠部件的特殊测试11.350-W 点功率测试12、标识12.1 概述12.2 要求的标记8750LIGHT EMITTING DIODE (LED) LIGHT SOURCES FOR USE IN LIGHTING PRODUCTS用于照明产品的LED光源Issue Number: 3版次：3JULY 22, 20082008年7月22日Summary of Topics主题摘要This is the third issue of the Outline of Investigation for Light Emitting Diode (LED) Light Sources For Use In Lighting Products. The outline covers the component parts of a light emitting diode (LED) light source such as LED modules, LED Arrays, power sources and control circuitry. It covers LED light sources that are produced by the end use product manufacturer, and that are an integral part of the end use product, or discrete component parts of an LED light source produced by one manufacturer for use in another manufacturers lighting product.这是第三版次的指导大纲，用来调查研究用于照明产品的LED光源。这个指导纲要涵盖了LED光源的零部件，诸如LED模块，LED阵列，电源和控制电路。它还涵盖了成品工厂所生产的，和成品成一个整体的LED光源，或者是一家工厂生产的，用于另一家工厂生产的成品之中的LED光源分立元件。The UL Foreword is no longer located within the UL Outline of Investigation. For information concerning the use and application of the requirements contained in this Outline of Investigation, the current version of the UL Foreword is located on ULStandardsInfoNet at: /ulforeword.htmlThe text included in paragraphs 3.13.1, 3.13.2, and 3.13.3 and Tables 7.2 and 7.3 are based on material in Information Technology Equipment - Safety - Part 1: General Requirements, IEC 60950-1, First edition copyright 1999-01. This material is used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with permission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. Copies of the IEC Publication 60950-1 may be purchased from ANSI, 11 West 42nd Street, New York, New York, 10036, (212) 642-4900.COPYRIGHT 2008 UNDERWRITERS LABORATORIES, INC.INTRODUCTION绪论 1 Scope 1 适用范围1.1 These requirements specify the minimum safety requirements for the component parts of a light emitting diode (LED) light source that serves as the source of illumination in any of the lighting products listed in 这些要求阐明了LED光源的零部件在用作1.3所列的所有灯具的光源时的最低的安全要求。1.2 An LED light source consists of one or more of the following component parts:1.2 一个LED光源，由如下所列的一个或多个零部件组成：a) LED package, array, or module that converts electrical energy to light (400 - 700 nm) or UV radiation (180 - 400 nm) or infrared radiation (700 nm - 300 nm), and heat,a) LED包，阵(序)列，或者模块，将电能转换成可见光（400700纳米）或者紫外线（180400纳米）或者红外线（700300纳米），和热能；b) Power source that supplies the proper voltage and current to operate the LEDs,b) 给LED提供适当电压和电流的电源；c) Control (controller) circuitry that may switch, dim or otherwise control the electrical energy to the LEDs.c) 能控制输送到LED的电能的部件，比如开关，调光器或者其它的控制器。1.3 LED light sources complying with these specifications are utilized as the source of illumination in lighting products that comply with the appropriate end-product standard as listed below. These lighting products are intended for installation on branch circuits of 600 V nominal or less in non-hazardous locations in accordance with the National Electrical Code (NEC), ANSI/NFPA 70. These requirements also apply to LED light sources connected to isolated (non-utility connected) power sources such as batteries, fuel cells, and the like. Included are:1.3 符合规范要求的LED光源被用作灯具产品的照明源，这些灯具产品都要符合到如下所列的其对应的成品安全标准要求。这些灯具产品都用于600伏及以下的电路，用于符合NEC，ANSI/NFPA 70要求的安全场所。这些要求也适用于连接到绝缘电源的LED光源，这些绝缘的电源有干电池，燃料电池，和诸如此类的电源。成品标准包括：a) Luminaires, UL 1598; 灯具b) Portable luminaires, UL 153; 便携式灯具c) Stage and studio luminaires, UL 1573; 舞台灯d) Submersible luminaires, UL 676;潜水灯e) Swimming pool luminaires, UL 676;泳池灯f) Track lighting systems, UL 1574 ;轨道灯g) Signs, UL 48;信号灯h) Emergency lighting and exit signs, UL 924;紧急照明及出口灯i) Self-ballasted lamps, UL 1993;节能灯j) Luminous Egress Path Marking Systems, UL 1994;出口通道指示灯k) Nightlights, UL 1786;小夜灯l) Flexible lighting, UL 2388;软管灯m) Low Voltage Lighting Systems, UL 2108;低压灯n) Lampholder Fittings, UL 496;灯座o) Low Voltage Landscape Lighting, UL 1838; and低压景观灯p) Luminaires for Use in Hazardous (Classified) Locations, UL 844.用于危险场所的灯具 2 General 2 概要 2.1 Components2.1 零部件2.1.1 Except as indicated in 2.1.2, a component of a product covered by this outline shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by this outline.2.1.1 除了条款2.1.2，被这个指导大纲所包括的零部件，要符合其对应的零部件的要求。请看附录A，是使用于被此大纲所包括的产品之中的零部件的安全标准列表。2.1.2 A component is not required to comply with a specific requirement that:2.1.2一个元件不要求遵守特殊的要求的情况：a) Involves a feature or characteristic not required in the application of the component in the product covered by this outline, ora) 被这个大纲所包括的产品中的元器件，它所具有的特征或者特性在应用时是不作要求时，或者，b) Is superseded by a requirement in this outline.b) 被这份大纲的某个要求所取代时。2.1.3 A component shall be used in accordance with its rating established for the intended conditions of use.2.1.3一个元件将被应用在额定的使用条件下。2.1.4 Specific components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions.2.1.4特殊零件具有不完整的结构或受到限制的性能。这些零件仅仅用在受限制的条件下，诸如某些温度不能超过一定的限值，而且它们也只能用在这些特殊的条件下。 2.2 Units of measurement2.2 度量单位2.2.1 Except for conductor size, values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information.2.2.1 除了不用圆括号括起来的导体的尺寸、数值是必须的要求，其它用圆括号括起来的数值都是解释性的信息或者近似值。2.2.2 All values of voltage and current are true root mean square (rms) values unless