Origin-TIF作图指南.doc

利用Origin和Photoshop获得文件较小分辨率较高的图片Origin 7.0 作图时，要求字号28 pt, 线宽1.5 。一Origin 7.0 输出高质量图片。无法采用本套方案1 利用Origin 画图。对于常规单列图(占版面一半)，要求坐标和图内文字为28号字。参数和单位之间空格，例如 Wavelength /nm 2 输出图片。From the File menu, click on Export Page. In the window that appears, select Tag Image File (*.TIF) from the file format drop-down menu, enter a meaningful file name (e.g. figure1.tif), and tick the Show Export Options (see below), then click on Save.3 - In the TIFF Options window that appears, set the options as shown below (with Color Depth set to 600dpi, RGB, Monochrome, LZW for black and white images, and 150 dpi, RGB, 256/True Color, LZW for colour/grayscale images), then click OK.4 - The file produced by steps 1 to 3 is large (33 cm wide) and low resolution (150 pixels/inch). It can be used as it is, but if you have access to a graphics package such as Adobe PhotoShop you can tidy up the format. Photoshop 7.0 英文版：You should: i. In the Image Size function, change the Resolution to 600 pixels/inch with the Resample option off (i.e. the number of pixels in the image will remain constant, and the image size will be reduced in proportion to the increase in resolution). ii. Use Save As. to resave the image with LZW compression selected. 二、Photoshop 7.0 中文版：用Photoshop 7.0 打开图片，点击菜单”图像”，图像大小，出现：将“重定图像像素“前的勾去掉，出现：（黑白图 像素宽度最好不小于6817）改变分辨率，一般来说，彩图分辨率不小于300, (TEM and SEM as color figure), 黑白图分辨率