8发表科学研究论文统计表.doc

附表8 发表科学研究论文统计表序号论 文 名 称作 者刊物、会议名称年、卷、期检索情况1Die Cavity Design of Near Flashless Forging Process Using FEM Based Backward SimulationZhaoGuoqunJournal of Materials Processing Technology,2002,121:173-181.(EI)2Preform DieShape Design for Uniformity of Deformation in Forging Based on Perform Sensitivity AnalysisZhaoGuoqunJournal of Material Processing Technology2002,128:25-32.(EI)3Analysis and Design of New Manufacturing Process for a Support Shaft Using Finite Element MethodZhaoGuoqunJournal of Materials Processing & Technology2002,121:259-264 .(SCI、EI)4Powder Forging of a Motorcycle Connecting RodZhaoGuoqunJournal of Materials Science & Technology2002,18(6): 544-548. (SCI)5Simulation and Analysis of Rotary Forging ARing Workpiece Using Finite Element MethodZhaoGuoqunFinite Elements in Analysis and Design2002,(38):1151-1164. (SCI、EI)6Optimal Preform Die Design through Controlling Deformation Uniformity in Metal ForgingZhaoGuoqunJournal of Material Science & Technology2002,18(5):465-467.(SCI)7Numerical Simulation of Vulcanization Field of Slicone RubberZhaoGuoqunActa Chimica Sinica2002,60(8):1368-1373.(SCI)8Investigation of Computer-Aided Engineering of Silicone Rubber Vulcanizing (II)-Finite Element Simulation of Unsteady Vulcanization FieldZhaoGuoqunPolymer2002,43(26):7515-7520.(SCI)9Numerical and Experimental Study on New Cold Precision Forging Technique of Spur GearsZhaoGuoqunTrans. Nonferrous Metals Society of China2003,13( 4):798-802.(SCI)10Investigation of Computer-Aided Engineering of Silicone Subber Vulcanizing (I)-Vulcanization Degree Calculation Based on Temperature Field AnalysisZhaoGuoqunPolymer2003,44(1):319-326.(SCI（IF 1.838）、EI)11Numerical Simulation of Moldable Silicone Rubber Vulcanization Process Based on Thermal Coupling AnalysisZhaoGuoqunPolymer-Plastics Technology and Engineering,2003,42(5):883-898. (SCI(IF 0.514)12Finite Element Modeling of Laser Bending of Pre-loaded Sheet MetalsZhaoGuoqunJournal of Materials Processing Technology2003,142(2):400-407. (SCI、EI)13Studies on Optimization of Metal Forming Processes Using Sensitivity Analysis MethodsZhaoGuoqunJournal of Materials Processing Technology2004,147(2):217-228.（SCI, EI）14Research on Active Vibration Control Based on Combined Model for Coupled SystemsZhaoGuoqunChinese Journal of Mechanical Engineering2004,17(4):424-527.（EI）15A Combined Model of the Active Vibration Control of the Coupled Flexible SystemZhaoGuoqunMaterials Science Forum2004,471-472:537-541.(SCI)16A Rapid Design and Manufacturing System for Product Development ApplicationZhaoGuoqunPrototyping Journal, The international Journal on Technologies for Rapid Product Development and Direct Manufacturing,2004,10(3):200-206.(SCI)17Active Control of Structural Vibration by Piezoelectric Stack ActuatorsZhaoGuoqunJournal of ZhejiangUniversity Science2005,6A(9):974-979 .(EI)18A Photo-plastic Experimental Study on Deformation of Rotary Forging a Ring WorkpieceZhaoGuoqunJournal of Materials Processing Technology2005,169(25):108-114.(SCI,EI）19Influence of Material Properties on the Laser-Forming Process of Sheet MetalsZhaoGuoqunJournal of Materials Processing Technology2005,167(1):124-131（SCI、EI）20Grain Refinement Mechanism Analysis and Experimental Investigation of Equal Channel Angular Pressing for Producing Pure Aluminum Ultra-Fine Grained MaterialsZhaoGuoqunMaterials Science & Engineering A2006,437:281-292.(SCI)21Sensitivity Analysis Based Multiple Objective Perform Die Shape Optimal Eesign in Metal FormingZhaoGuoqunJournal of Materials Science & Technology2006,22(2):273-278. (SCI)22Numerical Studies on Processing Route Simulation and Deformation Mechanism of Multi-pass Equal Channel Angular Pressing ProcessZhaoGuoqunJournal of Materials Processing Technology2006,176:251-239.(SCI)23Influence of Belt Cord Angle on Radial Tire Under Different Rolling StatesZhaoGuoqunJournal of Reinforced Plastics and Composites2006,25(10):1059-1077. (EI)24Inverse Heat Conduction Analysis of Quenching Process Using Finite Element and Optimization MethodZhaoGuoqunFinite Elements in Analysis and Design2006,42:1087-1096.(SCI)25Numerical Simulation and Die Structure Optimization of an Aluminum Rectangular Hollow Pipe Extrusion ProcessZhaoGuoqunMaterial Science & Engineering A,2006,435-436:266-274.(SCI)26Three-Dimensional Nonisothermal Simulation of Multi-Layer Extrusion Processes of Polymer MeltsZhaoGuoqunPolymer-Plastics Technology and Engineering,2006,45(11):1257-1262.(SCI)27Simulation Based Porthole Die Structure Optimization of an Aluminum Profile Extrusion ProcessZhaoGuoqunTransactions of Nonferrous Metals Society of China2006 Special 3：1261-126.(SCIE 检索）28Numerical Simulation of Reactive Extrusion Process of SP6ZhaoGuoqunJournal of Applied Polymer Science2007,103:2331-2336.(SCI)29Technological Parameter Optimization of Gas Quenching Process Using Response Surface MethodZhaoGuoqunComputational Materials Science,2007,38:561-570.(SCI)30Computer Simulation of Reactive Extrusion Processes for Free Radical PolymerizationZhaoGuoqunPolymer Engineering and Science,2007, 667-674.(SCI)31FEM Simulation of Quenching Process and Experimental Verification of Simulation ResultsZhaoGuoqunMaterials Science & Engineering A2007,452-453:705-714.(SCI)32Massive Metal Forming Process Simulation Based on Rigid/visco-Plastic Element-Free Galerkin MethodZhaoGuoqunJournal of Materials Processing Technology2007,187-188:412-416.(SCI)33Microstructure of Fe-Based Alloy Hardfacing Coating Reinforced by Tic-VC ParticlesZDZhouJournal of Iron and Steel Research, International.2006,13(4):51-55.(SCI,EI)34Microstructure and Wear Properties of in Situ TiC/FeCrBSi Composite Coating Prepared by Gas Tungsten Arc WeldingZDZhouWear2006,260:25-29.(SCI,EI)35Microstructure and Properties of the TiC/Fe-Based Alloy Hardfacing LayersZDZhouJournal ofMaterials Science2005,40:3629-3633.(SCI,EI)36Micro-Cracking of Low Carbon Steel in Hot-Forming Processes.J.D.ZhangJ. Mat. Proc. Tech.2005,162-163:447-453（SCI,EI）37Tribological Properties of Plasma Sprayed Fe3Al-Al2O3 Graded CoatingsJ.D.ZhangMaterials Science Forum2003,437-438:49-52.（SCI）38Fabrication and Properties of Fe3Al- Al2O3 Graded Coating by Plasma Spray.J.D.ZhangJ. Mat. Proc. Tech.2003,134(2).（SCI,EI）39Control of an Inspection Robot for 110KV Power Transmission Lines Based on Expert System Design MethodsF Y Zhou, J D Wang, Y B Li, J Wang, H R XiaoProceedings of the 2005 IEEE Conference on Control Applications Toronto, Canada, August2005,28-31:1563-1568.( ISTP)40Control Strategy and Implementation of an Inspection Robot for 110kV Power Transmission Lines， Control and AutomationFengyu Zhou, Hairong Xiao, Yibin Li, Aiguo WuProceedings of the 6th World Congress on June 21-23,2006,Dalian,Chinap9052-9056.( EI, ISTP)41Fingerprint Matching for Sensor InteroperabilityYilong Yin,Ning LiuJournal of Computational Information Systems2006,2(4):1419-1426.(EI)42Ridge Distance Estimation in Fingerprint Images: Algorithm and Performance EvaluationYilong Yin,Jie Tian,Xiukun YangEURASIP Journal on Applied Signal Processing2004,(4):495-502.(SCI)43Wavelet Packet Transform for Fingerprint Image SegmentationYilong Yin, Hongwei Zhang, Hui Wang Proceedings of 2006 Internatioanl Conference on Artifical Intelligence, Beijing, China2006,8:192-195.(ISTP)44CNC Flexible Generating Specific Gear Tooth Profile Based on Standard Involute Gear HobFeng Xianying, Li Hui, Ai XingChinese Journal of Mechanical Engineering(机械工程学报英文版),2004,17(3):377-380.（EI）45Mathematical Description of Spatial Hob-generating Motion for an Arbitrary Gear Tooth ProfileFeng Xianying, Li HuiMaterials Science Forum2004,.471:409-41（SCI,EI）46Study on Design Principle of LogiX Gear Tooth Profile and the Selection of Its Inherent BasicFeng Xianying, Wang Aiqun LindInternational Journal of Advanced Manufacturing Technology2004(24):789-793（SCI,EI）47The Study of Flexible Generating Technology of the LogiX Gear Tooth ProfileWang aiqun, Feng Xianying第六届 ICPMT 国际会议论文集2002,948Geometry design of conical Cams with Oscillating Conical RollersGe Rongyu, Feng Xianying, Hu Bin5th International Conference on e-Engineering &Digital Enterprise Technology,2006,849The Studying of the Prepared Technology and Mechanism of Producing Pores about Tiny Pore HAp-ZrO2BiocompositeSUN KangningJournal ofSysthetic Crystals2004,33(6):567-57050Study on Forming Joining Technology and Interface Micro-Characteristics of Aluminum-Stainless Composite SheetLI Peiwu, SUN KangningTransactions of Nonferrous MetalsSociety of China,2003,13(6)51The Mechanical Properties and Microstructure of Fe-Al/Al2O3 Composite with Cr Mo and TiLI Aimin， SUN Kangning, LI PeiwuTransactions of Nonferrous MetalsSociety ofChina200352The influence on Mechanical Properties and Microstructure of CNTs/HAp Composite by Sintering TechnologyLI Aimin, SUN Kangning, Dong weifang Journal ofSynthetic CrystalsR2004(6):624-62853The Influence of Cr on Fracture Toughness and Microstructure of Fe-Al/Al2O3 CompositeLI Aimin, SUN KangningInterceramic,2003(9):33-3654Kinetics of Thermite reaction in Al-Fe2O3 System 3Run-Hua Fan Hong-Liang L , Kang-Ning SunThermochimica Acta x200555Study on the Magnetic Properties of Ordered and Disordered FeAl IntermetallicFan, Run-Hua, Yin, Wen-Zong; Sun, Kang-NingJournal of Functional Materials2005,36(9):1451-145456Structural Evolution of Mechanically Alloyed Nanocrystalline Fe-28Al PowdersFan, Run-Hua; Sun, Jia-Tao; Gong, Sun, Kang-NingPowder Technology2005,149(2-3):121-12657.Fabrication and Microstructure of Fe3Al Matrix Composite Reinforced by Carbon NanotubeLai-xue Pang, kang-ning Sun, Shui RenMaterials Science and Engineering A2007,(SCI)58Preparation and Microwave Absorption Properties of Ce-substituted Lithium FerriteSun Chang Sun kangningsolid state communications2007,141:258-261.(SCI)59Sol-gel Synthesis of Ce-substituted BaFe12O19S un Chang Sun kangningJ Mater Sci2007, (SCI)60Sol-gel Synthesis of Ce-substituted BaFe12O19Sun chang ,Sun kangningJournal of Materials Science2007,42,DOI : 10.1007/s10853-006-0758-461Preparation and Characterization of Magnesium-substituted LiZn Ferrites by a Sol-gel MethodSun chang ,Sun kangningPhysica B: Condensed Matter2007, 391,(2): 335-33862Reinforce Engineering Practice and Cultivate CreativeBi Jian-qiang, Wang Ying, Sun Kang-ning, Liu Rui.Reform and innovation of modern industrial trainging2004,10:588-59063Fe3Al-Al2O3陶瓷梯度涂层性能研究张景德材料工程2003,(4).（EI）64等离子喷涂Fe3Al-Al2O3陶瓷梯度涂层张景德机械工程材料2003,(2)65基体表面状态对Fe3Al/Al2O3复合涂层性能的影响张景德山东大学学报（工学版）2002,(6)66Fe3Al/Al2O3陶瓷复合材料承载条件下声学特征张景德山东大学学报（工学版）2002,(2)67双电极焊条熔滴过渡的特点及形式邹增大中国机械工程2004,24(6).(EI)68双电极焊条单弧焊工艺邹增大焊接学报2004,25(2).(EI)69双电极焊条单弧焊的电弧特性邹增大焊接学报2004,25(1).(EI)70TiC-VC耐磨堆焊焊条邹增大材料科学与工艺2001,9(4).(EI)71刹车片背板弯挤成形工艺研究栾贻国、黄晓慧锻压技术2002.27(4):31-3372反求工程及其相关技术栾贻国、唐炳涛山东大学学报2003,33(2):114-11873拉深件模口形状与拉深筋设置关系的模拟实验研究孙琳琳、栾贻国锻压装备与制造技术2006,41(2):55-5774拉延压力机多连杆机构运动分析与优化设计董桂伟、栾贻国锻压装备与制造技术2006,41(1):27-3075注射模具三维参数化标准件库的开发杨洪树、栾贻国山东大学学报2005,35(2):18-2176基于软件工程的拉深模CAD系统的研究李云江、栾贻国机械科学与技术2004,23(6):720-72277冲模CAD系统中图形实体生成及编辑技术李辉平、栾贻国模具工业2003,(6):5-778黄台电厂PM型燃烧器结构优化研究黄新元中国电力2004,(7)792009t/h锅炉侧包墙过热器爆管原因分析黄新元中国电力2004,(11)80火电厂循环水优化数学模型黄新元热能动力工程2004,(3)81螺纹槽管束传热特性及流动特性的实验研究黄新元热能动力工程2006,(4).（EI）82基于混合式多智能体系统的协作多机器人系统研究周风余等山东大学学报2005,35(1):82-8783高压架空输电线路自动巡线机器人的研制周风余等电力系统自动化2004,28(23):89-91. (EI)84高压输电线路自动巡线机器人机构设计及在约束条件下的逆运动学分析周风余、李贻斌等中国机械工程2006,17(1):4-8. (EI)85RPJ-D型喷浆机器人机械结构及其分布式计算机控制系统的可靠性设计周风余、李贻斌、苏学成等机器人2003,25(2):127-131.( EI)86基于CAN的喷浆机器人电控系统高可靠性设计周风余、李贻斌等系统工程与电子技术2003,25(11):1435-144487基于LM628的移动机器人伺服控制器设计周风余、李贻斌等电气传动2003,(5):41-4488基于中间件技术的异构机器人系统设计及实现周风余等山东大学学报2007,37(31)89高压巡线机器人的设计与实现周风余等机械科学与技术2006,(5)90基于Delaunay三角化的指纹匹配方法尹义龙、张宏伟、刘 宁计算机研究与发展2005,42(9):1622-1627. (EI)91指纹纹线距离估计:算法与性能评价尹义龙等模式识别与人工智能2004,17(2):190-195.(EI)92基于加博函数的指纹增强算法及应用尹义龙等软件学报2003,14(3):484-48993一种基于纹线相似度的指纹匹配算尹义龙等模式识别与人工智能2002,15(4):502-506.(EI)94第2项粒子对ECAP积压的2A12铝合金晶粒细化的影响王素梅、孙康宁材料科学与工艺2007,15(1):115-117.(EI）95滴定方式对纳米NH4ALo(OH)HCO3先驱体制备的影响毕见强、吴敬华、孙康宁人工晶体材料学报2007,36(1):138-140.（EI）96原位合成制备碳纳米管/羟基磷灰石复合粉体卢志华、孙康宁硅酸盐学报2007,35(2):212-21697Ti3Al含量对TiC/(Ti3Al+Zr2O)陶瓷复合材料晶粒生长及性能的影响任帅、孙康宁，庞来学人工晶体材料学报2006,35(6):1238-123198HAP/聚酯生物复合材料的制备与吸波特性孙 昌、孙康宁功能材料与器件学报2006,12(6):533-53699等经角挤压的2A12铝合金组织结构的研究毕见强、孙康宁、刘 睿、范润华等特种铸造及有色合金2006,26(2):69-721002A12铝块体超细晶材料的ECAP制备.毕见强、孙康宁、刘 睿、 范润华等人工晶体学报2006,35(2):165-167101等效应变量对等径角挤压的1Al2铝合金力学性能的影响毕见强、孙康宁塑性工程学报2005,12(6):42-46102剪切应变量对Al-3%Mg多晶材料性能的影响毕见强、孙康宁人工晶体材料学报2005,34(4):593-596103HAp/TZP复合材料的凝胶注模成型研究卢志华、孙康宁中国生物医学工程学报2005,24(6)104斜方晶系-磷酸三钙晶体的制备及应用赵 萍、孙康宁人工晶体学报2005,4(1)105碳纤维增强磷酸钙骨水泥复合材料赵萍, 孙康宁硅酸盐学报2005,33(1)106Fe3Al金属间化合物的有序度截留与力学性能庞来学、孙康宁机械工程学报2005,41(1):33-37107等径角挤压的计算机模拟毕见强、孙康宁塑性工程学报2005,12(4):85-88108碳纳米管/羟基磷灰石复合材料的制备研究孙康宁等生物医学工程学报2004,23(6):573-578109碳纳米管/羟基磷灰石复合材料的力学性能与微观结构李爱民、孙康宁复合材料学报2004,21(5):98-102110纳微米复合HAp-ZrO2生物复合材料的制备与微观结构研究李爱民、孙康宁、尹衍升人工晶体学报2003,32(12)111块体纳米材料的制备及其应用毕见强、孙康宁等金属成形工艺2003,(8): 35-38.112制备块体纳米材料的新工艺-等径角挤压法毕见强、孙康宁、尹衍升等金属成形工艺2003,(6): 19-21113锻压机械打击系统的计算机模拟毕见强、孙康宁等锻压技术2003,(2): 48-50114大塑性变形法制备块体纳米材料毕见强、孙康宁、尹衍升、范润华金属成形工艺2002,(12):43-45115摩擦压力机打击力测量误差分析毕见强、孙康宁等金属