高保封条检测报告

METAL INDUSTRIES RESEARCH & DEVELOPMENT CENTREREGIONAL R & D SERVICE DEPARTMENT ( TAICHUNG )40768台中市台中工業區37路25號 TE L: (04)No25.37th Road,Industrial Park,40768 Taichung TaiwanTESTING REPORTApplicant : HIGHTER SECURITY SEALS(H.K) Application No : -T04COMPANY LIMITEDAddress : Received Date : 2016/04/11ROOM 1001,10/F.,TAI YAN BUILDING,181 Date ISSUED : 2016/04/21JOHNSTON ROAD, WANCHAI, HONG KONG Page 1 of 4(1).Name of Article :HTB02 Bolt Seal(As Photo 1)(2).Test Item : Tensile Test(3).Testing Instrument :Universal Testing Machine (No.TG0101) (4).Ambient Temp : 25 ; 60%R.H.(5).Inspection Reference :According to ISO/PAS 17712 : 2006(6).Result : Tensile Test Section 6.2 ISO/PAS 17712 : 2006The seal was gripped in a tensile machine and pull foree applied.Seal typeRepuirementLoad to failureResultKNSeal classificationHTB0210.0KN : High security seal2.27KN : Security seal2.27KN : Indicative seal11.5High security seal(H)Note : (1)This report is responsible for designated samples only.(2)Reproduction of all or parts this report without a written approval is strictly prohibitedReport Authorized Person : Inspector : Revision No : 0METAL INDUSTRIES RESEARCH & DEVELOPMENT CENTREREGIONAL R & D SERVICE DEPARTMENT ( TAICHUNG )40768台中市台中工業區37路25號 TE L: (04)No25.37th Road,Industrial Park,40768 Taichung TaiwanTESTING REPORTApplicant : HIGHTER SECURITY SEALS(H.K) Application No : -T04COMPANY LIMITEDAddress : Received Date : 2016/04/11ROOM 1001,10/F.,TAI YAN BUILDING,181 Date ISSUED : 2016/04/21JOHNSTON ROAD, WANCHAI, HONG KONG Page 2 of 4(1).Name of Article :HTB02 Bolt Seal (2).Test Item : Tensile Test(3).Testing Instrument :Universal Testing Machine (No.TG0101) (4).Ambient Temp : 25 ; 60%R.H.(5).Inspection Reference :According to ISO/PAS 17712 : 2006(6).Result : Shear Test Section 6.3 ISO/PAS 17712 : 2006.The seal was fixed a universal testing machine to withstand cutting withShearing blades and a compressive load applied slowly until the seal is severedSeal typeRepuirementLoad to failureResultKgSeal classificationHTB02341Kg : High security seal227Kg : Security seal227Kg : Indicative seal1,795High security seal (H)Note : (1)This report is responsible for designated samples only.(2)Reproduction of all or parts this report without a written approval is strictly prohibitedReport Authorized Person : Inspector : Revision No : 0METAL INDUSTRIES RESEARCH & DEVELOPMENT CENTREREGIONAL R & D SERVICE DEPARTMENT ( TAICHUNG )40768台中市台中工業區37路25號 TE L: (04)No25.37th Road,Industrial Park,40768 Taichung TaiwanTESTING REPORTApplicant : HIGHTER SECURITY SEALS(H.K) Application No : -T04COMPANY LIMITEDAddress : Received Date : 2016/04/11ROOM 1001,10/F.,TAI YAN BUILDING,181 Date ISSUED : 2016/04/21JOHNSTON ROAD, WANCHAI, HONG KONG Page 3 of 4(1).Name of Article :HTB02 Bolt Seal (2).Test Item : Tensile Test(3).Testing Instrument :Bending Testing Machine(4).Ambient Temp : 25 ; 60%R.H.(5).Inspection Reference :According to ISO/PAS 17712 : 2006(6).Result : Bending Test Section 6.4 ISO/PAS 17712 : 2006Fix the locking end on the universal testing machine in a horizontal positionApply a load on the remaining portion of the seal at a distance (the moment arm) above thefixed end so as to bend the seal 90 degrees.Seal typeRepuirementBending moment to failureResultNmSeal classificationHTB0250Nm : High security seal22NM : Security seal22Nm : Indicative seal51.5High security seal (H)Note : (1)This report is responsible for designated samples only.(2)Reproduction of all or parts this report without a written approval is strictly prohibitedReport Authorized Person : Inspector : Revision No 0METAL INDUSTRIES RESEARCH & DEVELOPMENT CENTREREGIONAL R & D SERVICE DEPARTMENT ( TAICHUNG )40768台中市台中工業區37路25號 TE L: (04)No25.37th Road,Industrial Park,40768 Taichung TaiwanTESTING REPORTApplicant : HIGHTER SECURITY SEALS(H.K) Application No : -T04COMPANY LIMITEDAddress : Received Date : 2016/04/11ROOM 1001,10/F.,TAI YAN BUILDING,181 Date ISSUED : 2016/04/21JOHNSTON ROAD, WANCHAI, HONG KONG Page 4 of 4(1).Name of Article :HTB 02 Bolt Seal (2).Test Item : Impact Test(3).Testing Instrument :1.Impact Testing Machine2.Programmable Low Temp. Tester(No.SG5501)(4). Inspection Reference : According to ISO/PAS 17712 : 2006(5). Result :Impact Test Section 6.5 ISO/PAS 17712 : 2006The impact test is performed at 18 degrees C and minus 27 degrees C of temperature.The impact load is applied at the locking mechanism of the seal in the directionOpposite the direction used in locking the sealSeal typeRepuirementResultJouleSeal classification18-27HTB0240.68J : High security seal27.12J : Security seal27.12J : Indicative seal40.740