Petrel官方地震解释培训M4_Well_Ties_Synth.ppt

1、Synthetic Seismogram Objectives Make Well Section Quality check and edit logs Create an Estimated log Import Check shots Correct sonic log and establish Time-Depth relation Make Acoustic Impedance log and Reflection Coefficient Series Generate Synthetic and Extracted Wavelets Produce Synthetic Seism

2、ogram Compare seismogram with real well seismic Manual adjustment and event picking Display of synthetic trace in 3D window Make well section 1.Select New well section window from the Window menu 2.Expand the Wells folder and select the appropriate wells 1 2 4.Color fill logs by using the Create/edi

3、t curve fill tool 3 3.Expand the Global well logs folder and select the available logs to use 4 Process overview 1. Select wells 1 2. Sonic correction 3. Time/Depth lookup 4. AI log and RC series 5. Generate Wavelet 6. Synthetic Seismogram 7. Correlate Seismic 2 3 4 5 6 7 Log input and QC 1.Input da

4、ta to Synthetics; Logs: Sonic s/ft Density gr/cm3 Check shots (CS): Check Shot Survey (or) VSP Additional logs (optional): GR API Caliper Hole diameter Any other 1 2 GRSonicDensityCaliperCS 2.Bad logs must be edited Estimate logs if missing Splice log intervals Manual editing Log editing 1.From Glob

5、al well logs Right click on DT and select Calculator 12 GRSonic 5 4 2.Make expression Sonic_despiked=DT 3.Use sonic as template 4.Sample MD from log and select DT as input 5.Click Enter 3 Log editing - Despike 1 2 3 4 5 2.Change Action #1 to Despike 3.Use default parameters 4.Run and view the result

6、 in well section 5.Undo and adjust parameters if not satisfied 1.From Global well logs Right click on Sonic_despiked and select Log editor SonicDespiked Log estimation Make density from sonic 1 2 3 4 5 2.Click on Use existing, select Global Well Log from the list 3.Set Action #1 to Density from Soni

7、c 4.Select Input Log 5.Apply default parameters 1.Right click on the well where an estimated log should be generated SonicEst.density 1.Double click on the Synthetics process under Stratigraphic modeling Process diagram 2 2.Move the mouse over each of the different icons to see hints on how to use t

8、hem 1 Opens settings page for the object Create a new object Opens the spreadsheet for the object 3.Select wells to work with and a well section to display any results in 3 1.Select a single well or the Wells folder to work with from the drop down menu Well selection 2 2.Working with one well only d

9、eactivates the Wells tab selection 3.Clicking None in the Wells tab, activates the separate well selection list 3 1 Load checkshots 1 2 3 4 3.Make sure Files of type is correct 1.Right click on Wells folder and use Import (on selection) 2.Select file(s) to import 4.Access the files by clicking Open

10、Load checkshots 1 2 3 B 5.Right click on checkshots to open the spreadsheet 1.Fit input parameters (A) to file (B) A 5 4 6 2.Connect to welltrace 3.Correct data (if needed) 4.OK (one file) or OK For All (two or more files if in same format) 6.Change depth from MD to TVD. Compare TVD and TWT with inp

11、ut file(s) and other time/depth information Sonic correction 1.Do the Sonic correction based on original sonic and check shots Dept h Tim e Check Shot Survey Sonic LogT.D.R. 2.Use the generated corrected sonic as input in the process 1 2 Well time/depth relation 1 2 1.Well TDR is defined by generati

12、ng global time log(s) 5.Click on Shared checkshots, select and drop in a source well from the Well filter of a checkshots item. Execute 3 5 4 2.Open Settings for Global time. 3.Rearrange the priority list using the blue up/down arrows. Mark (green tick) objects to select from 4.Click on Execute to g

13、enerate the global time log 2 1.In the Seismogram tab, click on Create synthetic seismogram Acoustic impedance and Reflection coefficient series 6 2.Select Density to use 3.Click on create new object icon to generate an Acoustic impedance log. Settings opens for selection 4.Select density and sonic

14、log onput 5.From the Acoustic impedance pull down menu, select the newly created log 6.Click on the Create new object icon for Reflection Coefficients. Select AI log for input and use the new log as input for RC 1 2 3 5 4 2.Select Synthetic type of seismogram Synthetic wavelet 2 Wavelet shape Phase

15、Amplitude Ricker Ormsby Klauder Butterwort h 4 3 3 1.Create new object for Wavelet. Open Settings for it 3.Select which Synthetic wavelet to use 4.Set parameters dependent on the selected Synthetic 1 Extracted wavelet 1 Wavelet shape Phase Amplitud e 3a 4 2 Bartlett Papoulis Hamming Cosine Hanning 4

16、 5.Alternative type of seismogram is loaded from file 5 7 6 3 b 1.Select Extracted type of seismogram 3.a) Set Neighborhood extent for 3D seismic b) If 2D lines are used, set number of traces 2.From Input pane, select seismic data and Well. Drop both ino the dialog box using the drop in arrows 4.Sel

17、ect Taper window type 6.Import the file in the Input pane and open it in the dialog box 7.Set Time unit 1.Click on the Synthetic seismogram pull down menu to view its content Synthetic seismogram 2 1 Signal: S=R*Wavel et * = 2.Reflection coefficients and wavelet is input when Apply or OK is clicked

18、3.a) Select which extraction method to use, Radial or Orbital (3D) b) Set number of traces to use along seismic line (2D) Well seismic extraction 1 4 3a 3b 2. From the input pane, click on the seismic data object and drop it in using the drop in arrow 1.In the Well seismic tab, check the Create well

19、 seismic box 4.Set appropiate parameters for method chosen. 2 1.After generation of the synthetic seismogram, open Settings from the Shynthetics process dialog box 2.Open Synthetic seismogram tab and set Number of traces to 3. Set Peak frequency Action to Sequence and type in 20 25 30. Apply and vie

20、w the result in the well section 3.Open the 2D Style tab and select Show wiggles. Fill in the preferred parameters Synthetic seismogram settings 1 3 2 1.From the Input pane, right click on the Synthetics folder and select spreadsheet 2.Filter on a single well and set the Domain to work in (e.g. TWT)

21、 3.Specify Step and Use limit Min. and Max. to filter the spreadsheet Synthetic seismogram spreadsheet 1 3 2 4.Color fill the spreadsheet for visual aid to identify features not easily seen 4 1.Under the Sonic and time tab, with Overide global time log(s) active, check the Manual adjustment box Manu

22、al adjustment 1 3 2 4 2.Open the Well tops spreadsheet 3.Updated TWT Picked values can be entered. Click Apply in the spreadsheet to store the manually entered values 4.Applying the manual adjustment in the Synthetics process will update the TWT auto values to fit the TWT picked values Manual adjustment 5 6 7 5.Undo the Manual adjustment Create/edit well tops Show well top time Edit well top