H3CS7503基本操作命令.doc

1、本文档如对你有帮助，请帮忙下载支持！1. 配置 OLT接口 vlan H3Cinterface Olt 2/0/1H3C -Olt2/0/1 port hybrid vlan 1 to 4094 tagged (或 untagged)2. 创建 ONU 逻辑接口 H3Cinterface Olt 2/0/1H3C -Olt2/0/1using onu 1 to 32（假设此 OLT接口使用了 1 分 32 的分光器 ,）Please wait.Done. H3C -Olt2/0/13. 配置 ONU 设备 MAC 地址和 ONU 逻辑接口绑定 H3C interface onu 2/0/1:1

2、H3C-Onu2/0/1:1 bind onuid 00e0-fc70-2d6d4. 配置 ONU 逻辑接口为 trunk 模式 H3C interface onu 2/0/1:1 H3C-Onu2/0/1:1 port link-type trunk5. 配置 ONU 逻辑接口 PVID (ONU上行 PON口打 vlan 标签) H3C interface onu 2/0/1:1H3C-Onu2/0/1:1 port trunk pvid vlan 26.配置 ONU PON接口的上行带宽 H3C interface onu 2/0/1:1H3C-Onu2/0/1:1 upstream-s

3、la maximum-bandwidth 16007. 配置 ONU PON接口的下行带宽 H3C interface onu 2/0/1:1 H3C-Onu2/0/1:1 bandwidth downstream max-bandwidth 2000本文档如对你有帮助，请帮忙下载支持！8. 配置 ONU 以太网 uni 接口的上行带宽H3C interface onu 2/0/1:1H3C-Onu2/0/1:1 uni 1 port-policy inbound cir 10249. 配置 ONU 以太网 uni 接口的上行带宽H3C interface onu 2/0/1:1H3C-Onu

4、2/0/1:1 uni 1 port-policy inbound cir 102410. 配置 ONU 以太网 uni 接口端口隔离 H3C interface onu 2/0/1:1 H3C-Onu2/0/1:1 uni 1 port-isolate11. 配置 ONU 以太网 uni 接口打 vlan 标签 H3C interface onu 2/0/1:1H3C-Onu2/0/1:1 uni 1 vlan-mode tag pvid 10112. 配置上行 GE接口协商模式 H3C interface G 2/1/1 H3C-Gigabit 2/1/1 speed 1000 H3C-G

5、igabit /12 /1 duplex full13. ONU注册信息显示 H3C display onuinfo slot 214. 查询 ONU 注册、注销命令H3C display onu-event interface onu 2/0/8:1 Date Time ONU Event ONU Status 2006/06/28 13:57:03 Registration Up 2006/06/28 13:57:06 Deregist ration Down15. 重启 ONUH3C interface onu 2/0/8:1 H3C-Onu2/0/8:1 reboot onu本文档如对

6、你有帮助，请帮忙下载支持！16. 配置设备名称 H3Csysname HTSM HTSM17. 配置管理接口，管理 vlanH3Cvlan 4 （假设 vlan 4 为管理 vlan）H3C-vlan3quitH3C interface GigabitEthernet /1/1 H3C Giga1/1/1port link-type trunk H3C Giga1/1/1port trunk permit vlan 4 H3C Giga1/1/1quit H3C上行接口如果直接接电脑，需要配置上行接口为access模式 H3C interface GigabitEthernet /1/1 H3

7、C Giga1/1/1port link-type access H3CGiga1/1/1port access vlan 4 H3CGiga1/1/1quit18. 配置设备管理 IP 地址，网关 H3C interface Vlan-interface 4 H3C -Vlan-interface4%Oct 14 14:18:59:276 2009 H3C IFNET/4/LINK UPDOWN: Vlan-interface4001: link status is UPH3C -Vlan-interface4 ip address 24 %Oct 14 14:19:08:283 2009

8、H3C IF NET/4/UPDOWN: Line protocol on the interface Vlan-interface4 is UP H3 C -Vlan-interface4 quitH3C ip route-static本文档如对你有帮助，请帮忙下载支持！19. 配置 DHCP H3C dhcp enable H3C dhcp server ip-pool 1 Abiao-dhcp-pool-1 network 24Abiao-dhcp-pool-1 gateway-list Abiao-dhcp-pool-1 dns Abiao-dhcp-pool-1 quit H3C i

9、nterface Vlan-interface 1H3C -Vlan-interface4 ip address20. 配置 OSPF H3C ospfAbiao-ospf-1 areaAbiao-ospf-1-area- networkAbiao-ospf-1-area- areaAbiao-ospf-1-area- networkAbiao-ospf-1-area- quit Abiao-ospf-1 quit21. 配置 telnet 登陆账号及 telnet 服务 H3C_OLT_LCGY telnet server enable % Start Telnet server H3C_O

10、LT _LCGYH3C_OLT_LCGY local-user admin（管理员户） New local user added.H3C_OLT_LCGY-luser-admin password simple h3c H3C_OLT_LCGY-luse r-admin service-type telnetH3C_OLT_LCGY-luser-admin authorization-attribute level 3 H3C_OLT_L本文档如对你有帮助，请帮忙下载支持！CGY-luser-admin quit H3C_OLT_LCGYH3C_OLT_LCGY user-interface

11、vty 0 4H3C_OLT_LCGY_vty_0_4 authentication mode scheme H3C_OLT_LCGY_vty_0_4 quit H3C_OLT_LCGY22. 配置 ACL访问控制列表举例：禁止通过ONU1 设备接入的客户端访问Server （ IP 地址为 H3C acl number 3000H3C-acl-standard-3000 rule 10 deny ip source any destinationH3C-acl-standard-3000 quit H3C traffic classifier c_1H3C-classifier-c_1 if

12、-match acl 3000 H3C-classifier-c_1 quit H3C traffi c behavior b_1 H3C-behavior-b_1 filter deny H3C-behavior-b_1 quit H3C qos policy p_1H3C-qospolicy-p_1 classifier c_1 behavior b_1 H3C-qospolicy-p_1 quit H3C interface Onu 1/0/1:1H3C-Onu1/0/1:1 qos apply policy p_1 inbound23. 配置网管 snmp 参数 H3C_OLT_LCG

13、Ysnmp-agentH3C_OLT_LCGYsnmp-agent community read noc-911 acl 2000 H3C_OL T_LCGYsnmp-agent community write noc-007 acl 2000 H3C_OLT_LCGY snmp-agent sys-info version all H3C_OLT_LCGYsnmp-agent trap enable本文档如对你有帮助，请帮忙下载支持！H3C_OLT_LCGYsnmp-agent target-host trap address udp-domain para ms securityname

14、security v1 H3C_OLT_LCGY24. 创建 vlanH3C_OLT_LCGYvlan allPlease wait. . Done. H3C_OLT_LCGY25. 配置在 OLT接口上打外层标签功能（ QinQ） 举例：对于内层标签10，打上外层标签1000 ProviderA interface olt 1/0/1ProviderA-Olt1/0/1 port link-type hybridProviderA-Olt1/0/1 port hybrid vlan 10 1000 tagged ProviderA-Olt1/0/1 qinq vid 1000Provider

15、A-Olt1/0/1-vid-1000 raw-vlan-id inbound 10 ProviderA-Olt1/0/1 -vid-1000 quitProviderA interface gigabitethernet 1/1/1ProviderA-GigabitEthernet1/1/1 port link-type trunk ProviderA-GigabitE thernet1/1/1 port trunk permit vlan 100026. 保存配置H3C_OLT_LCGYquit save本文档如对你有帮助，请帮忙下载支持！The current configuration

16、 will be written to the device. Are you sure? Y/ N:yPlease input the file name(*.cfg)flash:/startup.cfg(To leave the existing filename unchanged, press the enter key): Validating file. Please wait.Saved the current configuration to mainboard device successfully. Confi guration is saved to device successfully. 27. ONU 4端口对上行报文打上同样vlan 标签，且进行 vlan 隔离配置# interface