HACMP安装、配置-施实全过程

1、作者：Pan Hon glia ng仅供个人学习HACMP安装、配置，施实全过程环境：两台P630 : P630_1，P630_2磁盘陈列：7133-D40共享卷组：oravg1、在两台计算机上设置IP地址(1)在 p630_1 机上：A. 配置第一块boot网卡->#smitty->CommunicationsApplications and Services->TCP/IP->Minimum Configuration& Startupselect en2* HOSTNAME p630_1* Network INTERFACE en1NAMESERVERIn

2、 ternet ADDRESS (dotted decimal)DOMAIN Name Default GATEWAY Address B. 配置第二块boot网卡->#smitty->CommunicationsApplications and Services->TCP/IP->Minimum Configuration& Startupselect en1* HOSTNAME p630_1* Network INTERFACE en3NAMESERVERIn ternet ADDRESS (dotted decimal)DOMAIN Name Defaul

3、t GATEWAY Address (2) 在 p630_2 机上：A. 配置第一块boot网卡->#smitty->CommunicationsApplications and Services->TCP/IP->Minimum Configuration& Startupselect en2* HOSTNAME p630_2* Network INTERFACE en1NAMESERVERIn ternet ADDRESS (dotted decimal)DOMAIN Name Default GATEWAY Address B. 配置第二块boot网卡-&

4、gt;#smitty->CommunicationsApplications and Services->TCP/IP->Minimum Configuration& Startupselect en1* HOSTNAME p630_2* Network INTERFACE en3NAMESERVERIn ternet ADDRESS (dotted decimal)DOMAIN Name Default GATEWAY Address 2、修改/etc/hosts 文件，内容如下：10.10.9.1 boot_11 p630_110.10.10.1 boot_12

5、p630_1192.168.1.1 service110.10.9.2 boot_21 p630_210.10.10.2 boot_22 p630_2192.168.1.2 service23、在p630_1上建立共享卷组建立oravg共享卷组Storage)->#smitty->System Storage Management (Phisical & Logical->Logical Volume Man ager->Volume Groups->Add a Volume GroupVOLUME GROUP name oravgPhysical par

6、tition SIZE in megabytes 128* PHYSICAL VOLUME names hdisk2Activate volume group AUTOMATICALLY no at system restart?Volume Group MAJOR NUMBER Create VG concurrent Capable? yesAuto-varyon in Concurrent Mode? no4、在p630_2上import共享卷组(1) import oravg 共享卷组->#smitty->System Storage Management (Phisica

7、l & Logical->Logical Volume Man ager->Volume Groups->Import a Volume GroupVOLUME GROUP name oravg* PHYSICAL VOLUME name hdisk2Volume Group MAJOR NUMBER Make this VG Co ncurrentCap able noMake default vary on of VG Con curre nt?no(2) 修改oravg共享卷组属性->#smitty->System Storage Managemen

8、t (Phisical & Logical->Logical Volume Man ager->Volume Groups->Set Characteristics of a Volume Group->Cha nge a Volume Groupselect * VOLUME GROUP name oravgVOLUME GROUP name oravg* ACTIVATE volume group AUTOMATICALLY no at system restart?* A QUORUM of disks required to keep the volum

9、e group on-li ne?Con vert this VG to Con curre nt Cap able? noStorage)Storage)yes* Autovaryon VG in Concurrent Mode? no5、在p630_1和p630_2上配置非TCP/IP网络->#smitty->Devices->TTY->Add a TTYselect tty rs232 AsynchronousTerminalTTY type ttyTTY in terface rs232Descriptio n Termi nal asynchronePare

10、nt adapter sa3* PORT number 0BAUD rate 9600PARITY noneBITS per characteNumber of STOP BITS 1TERMINAL type dumbSTATE to be con figured at boot time availableEnable LOGIN disable用Serial to Serial Cable连接一号机和二号机的 COM3,作为HACMP的心跳线测试心跳线：1）在 p630_1 机上执行:cat < /dev/tty02）在 p630_2 上执行：cat /etc/hosts >

11、 /dev/tty03）在p630_1上若显示出p630_2的/etc/hosts文件内容,说明心跳线配置正确6、建立应用服务器启动脚本755:在/etc/hascript 下分别建立dbstart.sh, dbstop.sh,然后修改文件属性为 #chomd 755 *7、HACMP的设置（1）定义 CLUSTER->lnitializationand Standard Configuration->Add Nodes to an HACMP ClusterAdd/Change/Showan HACMP Cluster输入字段* Cluster Name wlyNOTE: HAC

12、MP must be RESTARTEDon all no des in order for cha nge to take effect（2）定义p630_1节点-> Extended Configuration-> Extended Topology Configuration->C on figure HACMP Nodes-> Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster输入字段* Node Name p630_1CommunicationPath to Node +（2）定义p63

13、0_2节点-> Extended Configuration-> Extended Topology Configuration->C on figure HACMP Nodes-> Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster输入字段* Node Name p630_1CommunicationPath to Node +(3) 定义网络A. 定义IP网络-> Extended Configuration->Exte nded Topology Con figurati on-

14、>Configure HACMP Networks-> Add a Network to the HACMP ClusterAdd an IP-Based Network to the HACMP Cluster输入字段* Network Name net_ether_01* Network Type ether* +* Enable IP Address Takeover via IP Aliases Yes + IP Address Offset for Heartbeating over IP Aliases B. 定义非IP网络-> Extended Configur

15、ation->Exte nded Topology Con figurati on->Configure HACMP Networks-> Add a Network to the HACMP Cluster选择 # Pre-defined Serial Device Types 中的 rs232Add a Serial Network to the HACMP Cluster输入字段* Network Name net_rs232_01* Network Type rs232(4) 定义网络接口A.定义IP网络接口定义Boot_11接口 ：-> Extended Co

16、nfiguration-> Extended Topology Configuration->C on figure HACMP Communi catio nIn terfaces/Devices-> Add CommunicationInterfaces/Devices选择 Add Pre-defi nedCommuni cati onIn terfaces and选择 Communi cati onIn terfaces选择 Add a Communi catio nIn terface输入字段* IP Label/Address boot_11+* Network T

17、ype ether* Network Name net_ether_01* Node Name p630_1 +Network In terface Devices定义Boot_12接口 :-> Extended-> Extended->Con figureCon figurati onTopology Con figurati onHACMP CommunicationIn terfaces/Devices-> Add Communication Interfaces/Devices选择 Add Pre-defi nedCommuni cati onIn terfac

18、es and选择 Communi cati onIn terfacesDevices选择 Add a Communi catio nIn terface输入字段IP Label/Address boot_12+Network Type etherNetwork Name net_ether_01Node Name p630_1 +Network In terface DevicesDevices定义boot_21接口：-> Extended Configuration-> Extended Topology Configuration->C on figure HACMP C

19、ommuni catio nIn terfaces/Devices-> Add CommunicationInterfaces/Devices选择 Add Pre-defi nedCommuni cati onIn terfaces and选择 Communi cati onIn terfaces选择 Add a Communi catio nIn terface输入字段* IP Label/Address boot_21+* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network In terfa

20、ce 定义boot_22 接口：-> Extended Configuration-> Extended Topology Configuration->C on figure HACMP Communi catio nIn terfaces/Devices-> Add CommunicationInterfaces/Devices选择 Add Pre-defi nedCommuni cati on In terfaces and选择 Communi cati onIn terfaces选择 Add a Communi catio nIn terface输入字段* IP

21、 Label/Address boot_22+* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network In terface B.定义非IP网络接口定义 p630_1tty 接口 ：-> Extended Configuration-> Extended TopologyCon figurati on->Co nfigure HACMPCommuni cati onIn terfaces/Devices-> Add CommunicationIn terfaces/Devices

22、选择 Add Pre-definedCommuni cati onIn terfaces and选择 Communi cati on选择 net_rs232_01DeviceAdd a Communication输入字段DeviceDevicesDevice Name p630_1ttyNetwork Type rs232Network Name net_rs232_01Device Path /dev/tty0Node Name p630_1定义 p630_2tty 接口 ：-> Extended Configuration-> Extended TopologyCon figu

23、rati on->Co nfigure HACMPCommuni cati onIn terfaces/Devices-> Add CommunicationIn terfaces/Devices选择 Add Pre-definedCommuni cati onIn terfaces and选择 Communi cati onDevice选择 net_rs232_01Add a CommunicationDevice输入字段DevicesDevice Name p630_2ttyNetwork Type rs232* Network Name net_rs232_01* Devic

24、e Path /dev/ttyO* Node Name p630_2(5) 定义应用服务器定义wlyapp应用服务器：->lnitializationand Standard Configuration->C on figure Applicati onServers->Add an Application ServerAdd Application Server输入字段* Server Name wlyapp* Start Script /etc/hascript/dbstart.sh* Stop Script /etc/hascript/dbstop.sh(6) 定义共享

25、资源组定义wlyres资源组->lnitializationand Standard Configuration->Configure HACMP Resource Group->Add a Resource Group选择 CascadingAdd a Resource Group with a Cascading Management Policy (stand ard)输入字段* Resource Group Name wlyres*ParticipatingNode Names (Default Node Priority) p630_1 p630_2 +(7) 修改

26、资源组属性修改wlyres资源组属性：->lnitializationand Standard Configuration->Configure HACMP Resource Group-> Change/ShowResources for a Cascading Resource Group(standard)Change/ShowResources for a Cascading Resource Group输入字段Resource Group Name wlyresParticipatingNode Names (Default Node Priority) p630_

27、2 p630_1* Service IP Labels/Addresses +Volume Groups oravg +Filesystems (empty is ALL for VGs specified) +Applicati on Servers wlyapp +(8) 定义 Service IP定义 p630_1 的 service IP 地址：->lnitializationand Standard Configuration->C on figure Resources to Make Highly Available->C on figure Service I

28、P Labeles/Addresses->Add a service IP Labeles/AddressesAdd a Service IP Label/Address(standard)输入字段* IP Label/Address service1 +* Network Name net_ether_01+8、同步HACMP配置->lnitializationand Standard Configuration-> Verify and Synchronize HACMP ComfigurationVerify and SynchronizeHACMP Comfigura

29、tion输入字段* Verify, Synchronizeor Both Both +Force synchronizationif verificationfails? No* Verify changes only? No +* LoggingStandard+ 9、HACMP服务的启动和停止 启动：#smitty clstartStart Cluster Services输入字段 * Start now, on system restart or both now + Start Cluster Services on these nodes p630_1 BROADCAST messa

30、ge at startup? true + Startup Cluster Lock Services? false +Startup Cluster In formatio nDaem on? false +Reacquire resources after forced down ? false停止:#smitty clstopStop Cluster Services输入字段* Stop now, on system restart or both now + Stop Cluster Services on these nodes p630_1 BROADCAST cluster shutdow n? true +* Shutdown mode graceful+版权申明本文部分内容，包括文字、图片、以及设计等在网上搜集整理。版权为潘宏亮个人所有This article in eludes someparts, in cludi ng text, pictures, and desig n. Copyright is Pan Hon glia ng's pers onal own ership.用户可将本文的内容或服务用于个人学习、研究或