华为5700交换机DHCP基础配置案例

华为5700交换机DHCP基础配置案例华为5700交换机DHCP基础配置案例华为5700交换机DHCP基础配置案例V:1.0精细整理，仅供参考华为5700交换机DHCP基础配置案例日期：20xx年X月华为5700交换机DHCP基础配置案例配置两个地址池：/24和/24配置两个VLAN：10和20将四台主机分别加入VLAN自动获取IP地址，确保全网互通。步骤：DHCP交换机上在DHCP交换机上创建VLAN10，20；IP地址池VLAN10和IP地址池VLAN20[DHCP]DHCPenable//打开DHCP功能[DHCP]vlanbatch1020//创建两个Vlan10和20[DHCP]ippoolvlan10//新增地址池名称为Vlan10[DHCP]gateway-list//设置网关[DHCP]networkmask//设置地址段[DHCP]excluded-ip-address//可以设置排除IP范围[DHCP]leaseday5//设置获取到IP地址的有效期为5天[DHCP]dns-list//设置客户机DNS，多条命令可设置多个[DHCP]ippoolVLAN20//新增地址池名称为Vlan20[DHCP]gateway-list//设置网关[DHCP]networkmask//设置地址池[DHCP]excluded-ip-address//可以设置排除IP范围[DHCP]leaseday5//设置获取到IP地址的有效期为5天[DHCP]dns-list//设置客户机DNS，多条命令可设置多个分配vlanif端口配置[DHCP]interfacevlanif10//进入vlanif10接口[DHCP]ipaddress//配置接口IP[DHCP]dhcpselectglobal[DHCP]interfacevlanif20//进入vlanif10接口[DHCP]ipaddress//配置接口IP[DHCP]dhcpselectglobal给DHCP服务器1口和2口配置trunk链路[DHCP]interfaceg0/0/1[DHCP]portlink-typetrunk[DHCP]porttrunkallow-passVlan10[DHCP]interfaceg0/0/2[DHCP]portlink-typetrunk[DHCP]porttrunkallow-passVlan20二、SW1交换机上[SW1]DHCPenable//打开DHCP功能在交换机一上把端口1；2加入VLAN10；端口3设置成trunk链路[SW1]vlanbatch10//创建两个Vlan10[SW1]interfaceg0/0/1//进入接口1[SW1]portlink-typeaccess//配置接口类型为access[SW1]portdefaultvlan10//接口配置属于Vlan10[SW1]interfaceg0/0/2//进入接口2[SW1]portlink-typeaccess//配置接口类型access[SW1]portdefaultvlan10//接口配置属于Vlan10[SW1]interfaceg0/0/3//进入接口3[SW1]portlink-typetrunk