下载本文档
版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、the roads to ce marking of medical devicesfor manufacturers of devices covered by the medical device directive 93/42/eecgeneral requirementsall manufacturers of medical devices must:(custom-made devices and devices intended for clinical investigation are excluded)classify the devices (annex ix)based
2、 upon the class the device belongs to, select (article 11) and follow the appropriate conformity assessment procedure (annexes ii - vii). (see summaries for each class below.) the harmonised standard to fulfil the requirements of the quality systems in annexes ii, v and vi is en iso 13485:2003 “medi
3、cal devices quality systems requirements for regulatory purposes” where applicable.ensure that the devices fulfil the essential requirements (annex i) prepare technical documentation (annex ii, iii or vii) which shall include a general description of the product, design drawings, the results of the
4、risk analysis, a list of standards applied, test reports etc. the documentation shall make it possible to assess the conformity of the product with the requirements of the directiveestablish a system for reviewing data about products placed on the market and implement appropriate means to apply any
5、necessary corrective actionsnotify the authorities of serious accidents and narrow escapes caused by the productissue an ec declaration of conformityfile the ec declaration of conformity, the technical documentation, as well as decisions, reports and certificates from notified bodies to make them av
6、ailable to the national authorities (shall be filed for a period ending at least five years after the last product has been manufactured)all products mustcomply with the essential requirementsbe provided with ce marking, except for custom made devices and devices intended for clinical investigations
7、class i productsthe manufacturer himself declares that the products meet the provisions of the directive which apply to them, prepares a technical documentation and affix the ce mark to the device (annex vii).the manufacturer or his authorized representative for marketing of the product shall regist
8、er his activities at the competent authority of the member state where his registered business is located.exception:the device is placed on the market in a sterile condition and/or has a measuring function. the notified body shall examine the production process with regard to sterility and/or measur
9、ing function (annexes iv, v or vi).class idevice article 11:5 annex viideclaration of conformity sterile or measuring yes no *annex iv, v or viverification of notified bodycece*) limited useclass iia productsalternative 1:the notified body shall accept the manufacturers total quality system (design,
10、 manufacturing and final inspection) according to annex ii, except for section 4.alternative 2:the manufacturer himself declares that the products meet the provisions of the directive which apply to them according to annex vii. in addition the notified body examines and accepts each manufactured ite
11、m/batch according to annex iv or accepts the quality system for production and final testing according to annex v or the quality system for products according to annex vi.after having taken various administrative measures described in the relevant annex, the manufacturer then affix the ce mark and t
12、he identification number of the notified body to the product.class iiadevice article 11:2either orannex iia system with full quality assuranceannex viideclaration of conformity with annex va system with production quality assuranceannex via system with product quality assuranceannex ivec verificatio
13、n-evalutation and testing of every device or statistical verification either or or not including exam of the design (article ii, clause 3a) cececececlass iib productsalternative 1:the notified body shall accept the manufacturers total quality system (design, manufacturing and final inspection) accor
14、ding to annex ii, except for section 4.alternative 2:the notified body shall examine and assess the documentation and type-test the product according to annex iii and examine and accept each manufactured item/batch according to annex iv or accept the quality system for production and final testing a
15、ccording to annex v or the quality system for products according to annex vi.after having taken various administrative measures described in the relevant annex, the manufacturer then affix the ce mark and the identification number of the notified body to the product.class iibdevice article 11:3eithe
16、r orannex iia system with full quality assurance systemannex iiitype examination with annex via system with product quality assuranceannex va system with production quality assuranceannex ivec verification-evalutation and testing of every device or statistical verification either or or not including
17、 exam of the design (article ii, clause 3a) cececececlass iii productsalternative 1:the notified body shall accept the manufacturers total quality system (design, manufacturing and final inspection) and examine the design of the product according to annex ii.alternative 2:the notified body shall exa
18、mine and assess the documentation and type-test the product according to annex iii and examine and accept each manufactured item/batch according to annex iv or accept the quality system for production and final testing according to annex v.after having taken various administrative measures described in the relevant annex, the manufacturer then affix the ce mark and the identification number of the notified body to the product.class
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 2026-2027学年达州市通川区八年级上册语文期末联考试卷含答案
- 骶骨肿瘤后入路切除手术患者的围术期护理
- 送受话器装调工达标评优考核试卷含答案
- 渔船无线电操作员岗前创新意识考核试卷含答案
- 再造烟叶设备操作工持续改进评优考核试卷含答案
- 客运计划员岗前生产安全培训考核试卷含答案
- 氟橡胶装置操作工岗前基础实战考核试卷含答案
- 软木烘焙工持续改进测试考核试卷含答案
- 电池(组)装配工岗中面试考核试卷含答案
- 木屋架工可持续发展知识考核试卷含答案
- 2026年四川省党政领导干部政治理论水平考试(理论测试)在线题库及答案
- 全民消防 生命至上-第35个全国消防日安全教育主题班会
- 2026年江苏事业单位面试真题(医疗岗)附参考答案
- DG∕TJ 08-2242-2023 民用建筑外窗应用技术标准 附条文说明
- 内分泌与遗传代谢缺陷病危象及处理课件
- 2026年度中国软件行业基准数据报告 SSM-BK-202609
- CSCO胰腺癌诊疗指南(2026版)
- 二级综合医院评审标准(2022年版)
- 2026年江苏宿迁市中考英语考试真题带答案
- 季度细菌耐药性监测与分析报告
- 2026年血站质量管理规范考试题及答案
评论
0/150
提交评论