clemson university, this project will deploy an ….doc_第1页
clemson university, this project will deploy an ….doc_第2页
clemson university, this project will deploy an ….doc_第3页
clemson university, this project will deploy an ….doc_第4页
clemson university, this project will deploy an ….doc_第5页
已阅读5页,还剩12页未读, 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、Meso-Scale Deployment of OpenFlow:1. Clemson University, this project will deploy an OpenFlow testbed on the Clemson University campus and connect with wireless mesh access points and mobile terminals. This trial will conduct OpenFlow experimentation focused on OpenFlow enabled network operation sol

2、utions as a precursor to deployment into Clemson research and production networks.Toroki LS4810 switch2. Georgia Tech, this project will deploy an OpenFlow testbed in the CS building on the Georgia Tech Campus. This project will conduct OpenFlow experimentation focused on OpenFlow enabled next gener

3、ation network admission control system as a precursor to deployment into campus residential network. The testbed will replicate a campus deployment required to handle thousands of end hosts.Previously, the GTech network admission control system is a VLAN based approach, but there are several disadva

4、ntages for VLAN based access control. For example, the number of VLAN is limited, and the control overhead to set the private and public IPs for the authorization is big. GTech OpenFlow deployed OpenFlow switches for campus access control. All the hosts will go through OpenFlow switches to a central

5、ized controller for authorization. If it is authorized, it can access the network. Otherwise, it will be quarantined. 3. Indiana University, this project will deploy an OpenFlow testbed between two campuses. This trial will conduct OpenFlow experimentation focused on OpenFlow enabled dynamic provisi

6、oning and distributed monitoring as a precursor to deployment into the Indiana University campus production network. It will also examine and propose ways for network operators to manage and support their networks using Openflow enabled devices.HP Procurve 5406/6600Distributed monitoring:cSamp imple

7、mentation (Coordinated Sampling) a measurement framework for network-wide flow monitoring. Idea from CMU, IU wants to implement on OpenFlow. Current flow monitoring uses uniform packet sampling based on a sampling probability. And current routers record flow measurements completely independently of

8、each other, thus leading to redundant flow measurements and inefficient use of router resources.So they argue that a centralized system that coordinates monitoring across different routers can significantly increase the flow monitoring capabilities of a network.Three improvements:Use flow sampling i

9、nstead of uniform packet sampling; hash-based packet selection to eliminate duplicate measurements in the networks; framework for distributing responsibilities across routers to achieve network-wide monitoring goals while respecting router resource constraints.Dynamic provisioningDeploy an inter-Cam

10、pus Networking, between IU and IUPUI, investigating how OpenFlow will interoperate with existing inter and intra campus provisioning tools such as Sherpa (used on NLR):GMPLS, tools such as the Internet2 ION service.IPTV Worked on design with IU Campus Network Architecture group for using OpenFlow as

11、 a mechanism for fine-grained control of IPTV related traffic flows. OpenFlow would be used for Layer 2 switching decisions to avoid issues of multicast flooding and non-optimal topologies.Data capture Collaboration with Minaxi Gupta (IU) on designs for using OpenFlow as a mechanism to capture cyber

12、security data sets on campus networks.4. Rutgers, this project will deploy OpenFlow switches between wireless research networks and Internet2 to enable researcher programmability and virtualization in the wired network connecting the Rutgers wireless assets to the GENI backbone. OpenFlow switches in

13、 the ORBIT indoor mesh testbed will also enhance performance and flexibility and provide support for grid virtualization.NEC IP 88005. UW-Madison, this project will deploy an OpenFlow testbed throughout the University of Wisconsin campus. This project will develop OpenFlow extensions focused on the

14、creation of flexible, heterogeneous slices, the development of a generic load balancer and a captive portal for authentication. This work is a precursor to the deployment of OpenFlow into campus production networks. We have designed the OpenSAFE system and an accompanying language, ALARMS, for scala

15、ble and flexible network monitoring. OpenSAFE and ALARMS are based on OpenFlow. The system can perform a variety of network monitoring functions at line-rates. It also allows flexible interposition of middleboxes as well as fine-grained load balancing across a diverse collection of hardware. This sy

16、stem was demo-ed at GEC7, where it garnered a lot of interest from other GENI participants.HPOpenSAFE:Problem: How to route the traffic for network analysis in a robust, high performance manner that does not impact normal network traffic?They focus on network monitoring via inspection of copies of t

17、raffic at interesting points in the network.Current “copies of traffic”: 1. Span ports are typically directed into a single computer running some sort of IDS (Intrusion Detection System), 2. Span ports on network equipment is often extremely limited. OpenSAFE can direct spanned network traffic in ar

18、bitrary ways. OpenSAFE can handle any number of network inputs and manage the traffic in such a way that it can be used by many services while filtering packets at line rate.Design: The input is a connection from the span path at the chosen network aggregation point to an OpenFlowswitch port. Some n

19、umber of filters are in use, attached to various OpenFlow switch ports. Finally, output is directed into some number of sinks.6. University of Washington This project will deploy a hybrid OpenFlow and RouteBrick testbed within the computer science and engineering department. This project will develo

20、p building blocks allowing researchers to investigate the placement of middlebox functionality in enterprise networks. This work is a precursor to the deployment of OpenFlow and RouteBricks into campus production networks.Our goal is to build a testbed and develop building blocks that would allow re

21、searchers to investigate the optimal placement of middlebox functionality in todays enterprise networks. We have begun the deployment of OpenFlow enabled HP Procurve switches in the computer science building here at University of Washington. The deployment is initially being used by a small number o

22、f graduate students in systems and networking for both research and day-to-day use. Eventually it will be phased in as the primary network for a larger set of users. After phase in, we will continue to operate a research network so that researchers can test their ideas before validating them on the

23、production system.HP ProCurve 66007. Princeton UniversityThis project will deploy an OpenFlow testbed within the CS self-operated IT department. This trial will conduct OpenFlow experimentation focused on OpenFlow enabled management of experimental and production services as a precursor to deploymen

24、t into their departments production network.HP ProCurve switchesDo not have any documents!8. Stanford University This project will deploy an OpenFlow, testbed throughout the Stanford University campus. This project will develop OpenFlow extensions focused on the creation of flexible, heterogeneous s

25、lices, the development of a generic load balancer and a captive portal for authentication. This work is a precursor to the deployment of OpenFlow into campus production networks.Eight OpenFlow switches (HP, NEC, Quanta, and Toroki)Developer of OpenFlow!Including a) OpenFlow reference implementation,

26、 b) FlowVisor, c) SNAC Controller, and d) Debugging/monitoring tools.9. Internet2 OpenflowInternet2 will implement Stage 0 of the Internet2 OpenFlow test network by creating a five node OpenFlow test network using small enterprise switches (HP ProCurve 5406 switches proposed, pending evaluation). Th

27、e initial design has 10GE WAN interfaces, but that is subject to negotiation of the MOU Internet2 has with GENI for wide-area connectivity. Stage 0 comprises the appropriate OpenFlow controller(s), interfaces to connect several enterprise OpenFlow campuses, and interfaces to connect other projects s

28、uch as ProtoGENI and SPP. The Stage 0 network will allow members and non-members of Internet2 to connect to GENI OpenFlow services. Internet2 will create OpenFlow nodes in five cities: Atlanta, Chicago, Houston, New York, and Salt Lake City. Internet2 will also explore integrating the OpenFlow nodes

29、 with OpenFlow deployments on ProtoGENI nodes. In this second, complementary-to-ProtoGENI scenario, Internet2 will create OpenFlow nodes in five cities: Atlanta, Chicago, Los Angeles, New York, and Seattle. 10. National LambdaRail OpenflowDeploy and operate OpenFlow-enabled HP Procurve 6600 switches

30、 at 5 NLR POPs and interconnect NLRs FrameNet network to the GENI OpenFlow-enabled backbone, permitting members and non-members of NLR to connect to GENI OpenFlow services.OpenFlow at LSUThis project will deploy an OpenFlow testbed in Frey Building on the LSU campus.The purpose of OpenFlow deploymen

31、t at LSU is to help both experiment traffic and production traffic to make better use of our existing high speed network research testbed. We have already established an up to 10Gbps high speed network research testbed CRON (Cyberinfrastructure of Reconfigurable Optical Network) at LSU. For the expe

32、riment traffic, CRON has already established a 10Gbps connection to other ProtoGENI sites on the GENI backbone through Internet2 ION service. According to the final plan of GENI, the national backbones will be built out with OpenFlow. As a ProtoGENI site at LSU, we are responsible to provide OpenFlo

33、w capabilities on our ProtoGENI testbed, so that in the future all the ProtoGENI sites will have significant commonality in the technologies employed, and significant overlap in the sets of campuses. Also CRON is connected to Louisiana Optical Network Initiative (LONI) over 10Gbps links. Inside LONI

34、 network, there will be several Louisiana colleges and universities, such as Southern University, New Orleans University, University of Louisiana at Lafayette, and so on, which will use the high speed computing resources of CRON at LSU. Of course, these universities will be allowed to use CRON testbed for their high speed network research experiments the same as other ProtoGENI sites. Moreover, there will be some high spee

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论