2022澳洲博士留学申请书版_第1页
2022澳洲博士留学申请书版_第2页
2022澳洲博士留学申请书版_第3页
2022澳洲博士留学申请书版_第4页
已阅读5页,还剩4页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、 2022澳洲博士留学申请书版 2022澳洲博士留学申请书 Dear _, A Chinese graduate student of composite materials, I would like to pursue Ph. D. studies in a program in which I can do advanced inter-disciplinary research that is built upon my expertise in both chemical engineering and composite materials. I find that your pr

2、ogram is one of the few where such research is possible. I am due to complete my Masters studies next year at the Beijing Institute of Light Industry, a well-respected higher-learning institution that has served as a major cradle of engineering talents for light industries in this country. Majoring

3、in structural mechanics of composites, I have focused my studies on honeycomb sandwich and its applications for civilian purposes. Although I did not take many of the traditional undergraduate courses in this field, my graduate studies have proceeded well. Building on my extensive working experience

4、 with all kinds of materials, I have completed a host of projects, as listed in the Appendix, that are not only technologically advanced but also commercially profitable. My research has been highly commended by the school. To accomplish what I have accomplished, I have had to be more intelligent an

5、d overcome more difficulties than most of my classmates, for I did not get to receive a regular undergraduate education. Although I performed strongly in the 1988 National University Entrance Examinations and met the requirements for university acceptance, I did not craft a good enough strategy in a

6、pplying to the universities. As a result, my application fell through cracks, leaving me only the opportunity to study in a two-year college program, not to be discouraged by this mishap, I studied with diligence and creativity, and succeeded in firmly grounding myself in the studies of material pro

7、pensities and structures. When I completed that program, I was as capable as most graduates from the honors program in handling practical material problems from the angle of chemistry. Upon graduation in 1990,I first took up the job of an assistant engineer in a biochemistry pharmaceutical manufactu

8、rer, where I was in charge of the development and analysis of several lines of products. I was given the responsibility for VD Calcium Tablet in the first two weeks, as I demonstrated that I was able to do independent research, particularly in terms of quantitative analysis and microbiology inspecti

9、on, from five raw materials to semi-made and finished products. As my talents showed up, I took charge of the production and inspection of more and more products. Towards the end of 1991, I was awarded the honor of Excellent Employee in the factory of almost two thousand people in recognition of my

10、contribution to its business. Armed with the ability to quickly grasp the essence of new things, I made even more contribution to my second employer, a Joint-Venture Company of cosmetics. In this company, In the first two months after I was hired, I established, with reference to both the ISO and na

11、tional standards,. The companys standards of packaging materials for 35 different products from corrugated box to paper lid, from glass bottle to plastic cover. During the first half year, I turned myself from just a user of cosmetics to quality engineer of cosmetic actively engaged in R. & D. Three

12、 new products (Elysee Vitamin E Cream, Elysee Tonique and Elysee Lipbalm) I helped to develop were recognized as Provincial Scientific Achievements, for which I was conferred three certificates of Honor. I believe that when one embarks on a new career, he should be quick in accepting changes even th

13、ough he must still stick to his old principles. In these six years of working experience, I greatly improved myself in terms of technological expertise. I made chemical and microbiological examinations of different drugs skillfully and independently, successfully developed several new types of cosme

14、tics, some of which merited the designation of Provincial Scientific Achievements. But more importantly, I learned to ask more sophisticated questions and then answer them. The years of being an engineer has taught me how to be a person. I learned to be both a team leader and a team player. Working

15、in conjunction with others, I have always held onto the principle of being honest, modest and helpful to others, whether I was just a technician, an engineer or even the assistant to the general manager. I enjoy working with other people. I have been well liked by my colleagues. At the farewell part

16、ies for me, some of my friends were so reluctant to say goodbye to me that they would burst into tears. While working for the Chinese factory, I was once borrowed by a college to teach there as an adjunct instructor for half a year. During those months, I often worked late to check students work and

17、 prepare for the next days classes. I believe that this teaching experience will serve me well should you be able to offer me the position of a teaching assistant. At the graduate school, I have met new challenges the old way. I first acquired a profound understanding of the basic concepts and theor

18、ies of mechanics (theoretical and material ones), and then applied the fundamentals to my major: composites. As you can see from the from the transcripts of academic record, this approach paid off. My first academic article Honeycomb Sandwich Composite will be published in the second edition of the

19、Journal of Beijing Institute of Light Industry of 1998. Now I am writing my Masters Degree thesis, in which I shall compare the mechanical properties of corrugated cores and honeycomb cores, analyze the outstanding characters of the latter, establish the standards of civil-use honeycomb fiberboard,

20、and consider the marketing future of honeycomb fiberboard. I am confident that the combination of my extensive working experience and my solid academic training has adequately prepared me for advanced studies in my chosen field of specialty in your distinguished program. To undertake such studies, I

21、 have learned English well, so well that I was appointed first the English secretary to the factorys director and then the assistant to the joint-ventures general manager. In these positions, I dealt with international visitors and handled English documents. Such English proficiency should prove a g

22、reat advantage to me once I am enrolled in your program. Although I am now focusing my academic interests on composite materials, you may find that I may be more suitable for other majors. If so, I would greatly appreciate it if you could advise me accordingly. The following is a list of the researc

23、h work I have undertaken under the guidance of my advisor (mostly in the area of industrial applications of composites): (从略) Yours sincerely, 澳大利亚留学语言学习注意事项 一、尾音上升 不同的地区都会有自己的特色,澳洲的土地面积很广,因此即便都是说英语,但是口音上也是会有差异的,方言在英语中也同样存在,不过有一个共同特色就是尾音会有所上升。 大家仔细分辨,会发现基本上所有的地区,都是会有一个上升的尾音的发音,这会让人听起来感觉是在征求意见,即便是进行正

24、式的陈述,所以大家不仅要适应,还要主动经受。 二、加点鼻音 澳英中还有一个很重要的特色,就是会有很重的鼻音,大家抵达以后,会很容易的感受到这里的口音重鼻音的存在感很强,交流虽然没有障碍,但是一开始会比较别扭。 但是要想和本地人进行比较友好的沟通,而且拉近距离,大家就需要掌握正确的加鼻音方法,需要将自己的舌头习惯性的在发音的时候放在口腔的后方,这样这里更好的将鼻音加上。 三、舌头放松 虽然大家需要加鼻音和尾音,但是在说话的时候,还是需要将自己的舌头放在比较舒适的位置,这样才不会让人听起来很别扭,并且大家在准备的时候,也会比较的方便。 其实澳英发音是比较平和的,对大家的舌头摆放不会有很很高的要求,并且发音也是比较直的,大家只要自己的口语过关,然后适当进行本土化的修改适应即可。 四、澳式幽默 说英语自然不能够忽视俚语,澳洲的幽默和英国的又是不一样的,大家在听到一些俚语的时候,可能会觉得比较粗俗并且带有侮辱,实际上并没有那么严重,只是善意的玩笑。 大家在和本地人聊天的时候,可以加入一些自己觉得比较合适的俚语,从最基础的开始,这样

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论