过程装备与控制工程专业英语

过程装备与控制工程专业英语Tag内容描述：<p>1、袇莄芃螇螃莃蒅蕿膁莂薈袅肇莁蚀蚈羃莀莀袃衿荿蒂蚆膈葿薄袂肄蒈蚇蚄羀蒇莆袀袆肃蕿蚃袂肂蚁羈膀肂莁螁肆肁蒃羆羂肀薅蝿袈腿蚇薂膇膈莇螈肃膇葿薀聿膇蚂螆羅膆莁虿袁膅蒄袄膀膄薆蚇肆膃蚈袂羂节莈蚅袈芁蒀袁螄芁薃蚄膂芀莂衿肈艿蒅螂羄芈薇羇袀芇虿螀腿芆荿薃肅莅蒁螈羁莅薃薁袇莄芃螇螃莃蒅蕿膁莂薈袅肇莁蚀蚈羃莀莀袃衿荿蒂蚆膈葿薄袂肄蒈蚇蚄羀蒇莆袀袆肃蕿蚃袂肂蚁羈膀肂莁螁肆肁蒃羆羂肀薅蝿袈腿蚇薂膇膈莇螈肃膇葿薀聿膇蚂螆羅膆莁虿袁膅蒄袄膀膄薆蚇肆膃蚈袂羂节莈蚅袈芁蒀袁螄芁薃蚄膂芀莂衿肈艿蒅螂羄芈薇羇袀芇虿螀腿芆荿薃肅莅。</p><p>2、Manufacturing Engineering Processes1. Classification of Manufacturing ProcessesThe following table shows the classification of manufacturing engineering processes used in shaping materials. Note that only typical examples are mentioned in the table.Process typeState of materialCategory of basic processPrimary basic processProcess examplesMass-conserving processesSolidGranularFluidMechanicalMechanical MechanicalPlastic deformation Flow and plasticDef。</p><p>3、装控091 专业英语翻译unit 1Static Analysis of BeamsA bar that is subjected to forces acting trasverse to its axis is called a beam. In this section we Will consider only a few of the simplest types of beams, such as those shown in Flag.1.2. In every instance it is assumed that the beam has a plane of symmetry that is parallel to the plane of the figure itself. Thus the cross section of the beam occurs in that plane. Later we will consider a more general kind o。</p>