关于制作复杂纬编针织物结构模型的基础研究 第二部分:歪斜平纹织物的几何模型 毕业论文外文资料翻译.doc_第1页
关于制作复杂纬编针织物结构模型的基础研究 第二部分:歪斜平纹织物的几何模型 毕业论文外文资料翻译.doc_第2页
关于制作复杂纬编针织物结构模型的基础研究 第二部分:歪斜平纹织物的几何模型 毕业论文外文资料翻译.doc_第3页
全文预览已结束

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

basic studies for modeling complex weft knitted fabric structures part ii: a geometrical model for plain knitted fabric spiralitya model for the spirality of plain knitted fabrics with compressible yarns is given here by modifying kurbaks (1998) plain knitted loop model. the proposed model is thought to be applicable not only to the spirality of classical textiles, but also to modeling small diameter tubular technical textile fabrics. in the present study, it is suggested that because of the three-dimensional nature of the plain loop, the yarn part at the left arm of the loop and the yarn part at the right arm of the loop have torsions in opposite directions, so that if the yarn used is already twist lively, this potential twist applies in the same direction for both of the arms. therefore, the total twist decreases in one arm and increases in the other. to equalize their total twists, the curves of the yarn axis in the arms differ from each other (the elliptical cylinders on which the yarn arms wrapped differ in length and in radius). the upper and lower parts of the loop adjust themselves by transforming into parametric elliptical shapes from their original elliptical shapes. there is another method of twist redistribution in the fabrics, which is to differentiate the wrapping angles of the helices on two arms of a loop. this is defined as the second kind of spirality and is mainly seen in m x n rib structures as well as in some of the technical textile plain knitted fabrics. this second kind of spirality is not considered during the creation of the model, but a discussion is given on this subject at the end of the work.关于制作复杂纬编针织物结构模型的基础研究 第二部分:歪斜平纹织物的几何模型这里给出一个通过修改kurbak(1998)平纹针织线圈而得到的带有可压缩纱的歪斜织物模型。该模型被认为是不仅适用于古典纺织品的歪斜,而且适用于小直径管技术的纺织面料。目前的研究表明,由于平纹线圈的三维特性,在左边的循环纱线和在右边的循环纱线部分有相反的扭转方向,然而,如果使用的纱线已经扭曲,这种潜在的扭曲在织物两边将有相同的方向。因此,总的扭曲在一边减少而在另一边就会增加。为了平衡总的扭曲量,两边纱轴的转曲方向应该互补相同(在椭圆的锡林上预装着不同长度、不同半径的沙臂)。线圈的上部和下部可以通过改变椭圆的原

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

评论

0/150

提交评论