iphoneipad等苹果设备30针数据线接口定义.doc

iphone ipad等苹果设备30针数据线接口定义，大家可能有用iphone, 数据线, ipad, 接口找到iphone ipad等苹果设备30针数据线接口定义，大家可能有用下载 (41.15 KB)接口排列方式为2012-1-26 00:15iPhone数据线接口定义下载 (50.13 KB)接口排列方式为2012-1-26 00:15接口排列方式为:1.2.3.4.5.6.7.8.9.29.30内部焊接点排列为:1 3 5 7 9 11 13 15 17 19 21 23 25 27 292 4 6 8 10 12 14 16 18 20 22 24 26 28 30接口定义为:1 Ground (-) 地 *2 Line Out - Common Ground (-) 线路输出 地*3 Line Out - R (+) R声道线路输出4 Line Out - L (+)L声道线路输出5 Line In - R (+) R声道线路输入6 Line In - L (+) L声道线路输入78 复合视频输出 (只有彩屏的ipod有效)*9 S-Video 色度输出 (只有彩屏的ipod有效)10 S-Video亮度输出 (只有彩屏的ipod有效)11 Serial GNDRS-232串口 地12 Serial TxD RS-232串口 TxD13 Serial RxD RS-232串口 RxD1415 Ground (-) 地 *16 USB GND (-) USB电源负极 *1718 3.3V Power (+) 3.3V电源正极19 Firewire Power 12 VDC (+) 1394火线12V电源 正极 *20 Firewire Power 12 VDC (+)1394火线12V电源 正极*21 Accessory Indicator 附件识别接口 *22 FireWire Data TPA (-) 1394火线数据 TPA(-)23 USB Power 5 VDC (+)USB 5V 电源 正极24 FireWire Data TPA (+) 1394火线数据 TPA(+)25 USB Data (-)USB 数据(-)26 FireWire Data TPB (-)1394火线数据 TPA(-)27 USB Data (+) USB 数据(+)28 FireWire Data TPB (+) 1394火线数据 TPB(+)29 FireWire Ground (-) 1394火线12V电源 负极*30 FireWire Ground (-) 1394火线12V电源 负极*iphone接口定义英文版的：30 pin connector used on the dock station for iPod and iPhone.Available in all Apple iPod MP3 player (iPod 1G, 2G, 3G, 4G, 5G and Nano).This connector is used on iPod (starting from 3rd generation) and iPhone. It is used to connect the iPod or iPhone to various devices: PC (via USB or FireWire IEEE1394), audio amplifier, serial device (controlled via the Apple Accessory Protocol).PinSignalDescription1GNDGround (-), internaly connected with Pin 2 on iPod motherboard2GNDAudio and Video ground (-), internaly connected with Pin 2 on iPod motherboard3RightLine Out - R (+) (Audio output, right channel)4LeftLine Out - L(+) (Audio output, left channel)5Right InLine In - R (+)6Left InLine In - L (+)8Video OutComposite video output (only when the slideshow mode is active on iPod Photo)9S-Video Chrominance outputfor iPod Color, Photo only10S-Video Luminance outputfor iPod Color, Photo only11GNDSerial GND12Txipod sending line, Serial TxD13Rxipod receiving line, Serial RxD14NC15GNDGround (-), internaly connected with pin 16 on iPod motherboard16GNDUSB GND (-), internaly connected with pin 15 on iPod motherboard17NC183.3V3.3V Power (+)Stepped up to provide +5 VDC to USB on iPod Camera Connector.If iPod is put to sleep while Camera Connector is present, +5 VDC at this pin slowly drains back to 0 VDC.19,20+12VFirewire Power 12 VDC (+)21Accessory Indicator/Serial enableDifferent resistances indicate accessory type:1KOhm - iPod docking station, beeps when connected10KOhm - Takes some iPods into photo import mode500KOhm - related to serial communication / used to enable serial communications Used in Dension Ice Link Plus car interface1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the ipod when power (i.e. Firewire-12V) is cut. Looks to be that when this pin is grounded it closes a switch so that on loss of power the Ipod shuts off. Dock has the same Resistor.22TPA (-)FireWire Data TPA (-)235 VDC (+)USB Power 5 VDC (+)24TPA (+)FireWire Data TPA (+)25Data (-)USB Data (-)26TPB (-)FireWire Data TPB (-)27Data (+)USB Data (+)Pins 25 and 27 may be used in different manner. To force the iPod 5G to charge in any case, when USB Power 5 VDC (pin 23) is fed, 25 must be connected to 5V through a 10KOhm resistor, and 27 must be connected to the Ground (for example: pin 1) with a 10KOhm resistor.28TPB (+)FireWire Data TPB (+)29,30GNDFireWire Ground (-)NotesSignals with grey background may not exist on some docking stations.Apple serial devices (i.e. iTalk and remote control) communicate with iPod (3rd generation or more) using the Apple Accessory Protocol.The serial connection uses a standard 19200 baud 8N1 protocol (the speed can be i