金属理化性能实验方法.doc

金属理化性能实验方法1 GB/T 224-1987 钢的脱碳层深度测定法 Determination of depth of decarburization of steel 2 GB/T 225-1988 钢的淬透性末端淬火试验方法 Steel-hardenability test by end quenching(Jominy test) 3 GB/T 226-1991 钢的低倍组织及缺陷酸蚀检验法 Etch test for macrostructure and defect of steels 4 GB/T 227-1991 工具钢淬透性试验方法 Tool steelmethod of hardenability test 5 GB/T 228-1987 金属拉伸试验法 Metallic materials-Tensile testing 6 GB/T 229-1994 金属夏比缺口冲击试验方法 Metallic materialsCharpy notch impact test 7 GB/T 230-1991 金属洛氏硬度试验方法 Metallic materialsRockwell hardness test 8 GB/T 231-1984 金属布氏硬度试验方法 Metallic materials-Brinell hardness test 9 GB/T 232-1988 金属弯曲试验方法 Metallic materials-Bend test 10 GB/T 233-1982 金属顶锻试验方法 Method for forging test of metals11 GB/T 235-1988 金属反复弯曲试验方法(厚度等于或小于3mm薄板及带材) Metallic materialsReverse bend test(Sheet and strip 3mm thick or less) 12 GB/T 238-1984 金属线材反复弯曲试验方法 Metallic materials-Wire-reverse bend test 13 GB/T 239-1984 金属线材扭转试验方法 Metallic materials-Wire-torsion test 14 GB/T 241-1990 金属管液压试验方法 Metal tubesHydrostatic pressure testing 15 GB/T 351-1995 金属材料电阻系数测量方法 Metallic materials-Resistivity measurement method 16 GB/T 1423-1996 贵金属及其合金密度的测试方法 Method of measurement of density for precious metals and their alloys 17 GB/T 1424-1996 贵金属及其合金材料电阻系数测试方法 Method of measurement of resistivity of precious metals and their alloys 18 GB/T 1425-1996 贵金属及其合金熔化温度范围的测定 热分析试验方法 Determination of melting temperature range for precious metals and their alloys-Testing method of thermal analysis 19 GB/T 1479-1984 金属粉末松装密度的测定 第一部分 漏斗法 Metallic powders-Determination of apparent density-Part 1:Funnel method 20 GB/T 1480-1995 金属粉末粒度组成的测定 干筛分法 Determination of particle size for metallic powders-Dry sieving 21 GB/T 1482-1984 金属粉末流动性的测定 标准漏斗法 (霍尔流速计) Metallic powders-Determination of flowability by means of a calibrated funnel (Hall flowmeter) 22 GB/T 1551-1995 硅、锗单晶电阻率测定 直流两探针法 Test method for resistivity of silicon and germanium bars using a two-point probe 23 GB/T 1552-1995 硅、锗单晶电阻率测定 直排四探针法 Test method for measuring resistivity of monocrystal silicon and germanium with a collinear four-probe array 24 GB/T 1554-1995 硅晶体完整性化学择优腐蚀检验方法 Test method for crystallographic perfection of silicon by preferential etch techniques 25 GB/T 1557-1989 硅晶体中间隙氧含量的红外吸收测量方法 The method of determining interstitial oxygen content in silicon by infrared absorption 26 GB/T 1786-1990 锻制圆饼超声波检验方法 Cheese forgingMethod for ultrasonic inspection 27 GB/T 1814-1979 钢材断口检验法 Inspection method for steel work fractures 28 GB/T 1817-1995 硬质合金常温冲击韧性试验方法 Test method of impact toughness of cemented carbides at room temperature 29 GB/T 1818-1994 金属表面洛氏硬度试验方法 Metallic materials-Rockwell superficial hardness test 30 GB/T 1838-1995 镀锡钢板(带)镀锡量试验方法 Tin coated sheet(strip)-Tin coating mass testing method31 GB/T 1839-1993 钢铁产品镀锌层质量试验方法 Steel product-Zinc coating mass testing method 32 GB/T 1979-1980 结构钢低倍组织缺陷评级图 Diagram of a low magnification texture blemish grading of structural steel 33 GB/T 2038-1991 金属材料延性断裂韧度JIC试验方法 Metallic materialsStandard test method for JIC, a measure of ductile fracture toughness 34 GB/T 2105-1991 金属材料杨氏模量、切变模量及泊松比测量方法 (动力学法) Metallic materialStandard test method for the Youngs modulus, shear modulus and Poisons ratio (Dynamic method) 35 GB/T 2107-1980 金属高温旋转弯曲疲劳试验方法 Metal material-Twisting fatigue test 36 GB/T 2522-1988 电工钢片(带)层间电阻、涂层附着性、叠装系数测试方法 Magnetic sheet and strip-Methods of measurement of interlamination resistance and lamination factor and coat adhesiveness 37 GB/T 2523-1990 冷轧薄钢板(带)表面粗糙度测量方法 Cold rolled sheet(strip)Measuring method for surface roughness 38 GB/T 2596-1981 钨粉、碳化钨粉比表面积 (平均粒度) 测定 简化氮吸附法 Tungsten powder and tungsten carbide powder-Determination of specific surface product (average grainine- ss-Simplified nitrogen absorption method 39 GB/T 2970-1991 中厚钢板超声波检验方法 Thicker steel plateMethod for ultrasonic inspection 40 GB/T 2971-1982 碳素钢和低合金钢断口检验方法 Method of fracture test for carbon and low alloy steels 41 GB/T 2972-1991 镀锌钢丝锌层硫酸铜试验方法 Zinc-coated steel wireTest method for uniformity of zinc coating on wire by the copper sulphate dip 42 GB/T 2973-1991 镀锌钢丝锌层重量试验方法 Zinc-coated steel wireTest method for weight of zinc coating 43 GB/T 2976-1988 金属线材缠绕试验方法 Metalic materials-Wire-Wrapping test 44 GB/T 3075-1982 金属轴向疲劳试验方法 Method of axial force controlled fatigue testing of metals 45 GB/T 3076-1982 金属薄板 (带) 拉伸试验方法 Method for tensile testing of metallic sheet and strip 46 GB/T 3170.1-1982 铝粉粒度的测定 机械振动筛分法 Determination of particle size of aluminium powder-Mechanical vibration sieve method 47 GB/T 3170.2-1982 铝粉粒度的测定 风力手动筛分法 Determination of particle size of aluminium powder-Manual-air-blowing sieve method 48 GB/T 3170.3-1982 铝粉粒度的测定 乙醇筛洗法 Determination of particle size of aluminium powder-Sieve analysis with alcohol 49 GB/T 3171.1-1982 铝粉松装密度的测定 漏斗法 Determination of apparent density of aluminium powder -Funnel method 50 GB/T 3171.2-1982 铝粉松装密度的测定 容量计法 Determination of apparent density of aluminium powder -Volumeter method 51 GB/T 3172-1982 铝粉附着率的测定 钢片试验法 Determination of adhesion ratio of aluminium powder- Steel plate method 52 GB/T 3173-1982 铝粉盖水面积的测定 Determination of coating surface of aluminium powder on water 53 GB/T 3246-1982 铝及铝合金加工制品显微组织检验方法 Aluminium and aluminium alloys inspection method of microstructure for wrought products 54 GB/T 3247-1982 铝及铝合金加工制品低倍组织检验方法 Aluminium and aluminium alloys inspection method of macrostructure for wrought products 55 GB/T 3248-1982 铜、镍及其合金电阻系数测定方法 Determining method of resistivity of copper, nickel and their alloys 56 GB/T 3249-1982 难熔金属及化合物粉末粒度的测定方法 费氏法 Standard method for determination of particle size of powders of refractory metals and compounds-Fisher method 57 GB/T 3250-1982 铝及铝合金铆钉线铆接试验方法 Aluminium and aluminium alloys-Riveting test method for rivet wire 58 GB/T 3251-1982 铝及铝合金管材压缩试验方法 Aluminium and aluminium alloys-Compression test method for tubes 59 GB/T 3252-1982 铝及铝合金铆钉线与铆钉剪切试验方法 Aluminium and aluminium alloys-Shear test method for rivet wire and rivets 60 GB/T 3310-1982 铜合金棒材超声波探伤方法 Method of ultrasonic inspection for copper alloy bars 61 GB/T 3488-1983 硬质合金-显微组织的金相测定 Hardmetals-Metallographic determination of microstructure 62 GB/T 3489-1983 硬质合金 孔隙度和非化合碳的金相测定 Hardmetals-Metallographic determination of porosity and uncombined carbon 63 GB/T 3493-1983 贵金属及其合金细丝直径测量方法 (称重法) Standard method for measuring diameter of fine wire of the precious metals and their alloys(weighing method) 64 GB/T 3651-1983 金属高温导热系数测量方法 Measuring method for thermal conductivity of metal at high temperature 65 GB/T 3655-1992 电工钢片(带)磁、电和物理性能测量方法 Magnetic sheet and stripMethods of measurement of magnetic electrical and physical properties 66 GB/T 3656-1983 电工用纯铁磁性能测量方法 Measurement methods of magnetic properties of electrical iron 67 GB/T 3657-1983 软磁合金直流磁性能测量方法 Measurement method of direct magnetic properties of soft magnetic alloys 68 GB/T 3658-1990 软磁合金交流磁性能测量方法 Soft magnetic alloysMeasuring method for alternative magnetic properties 69 GB/T 3771-1983 铜合金硬度与强度换算值 Conversion of hardness and strength for copper alloys 70 GB/T 4058-1995 硅抛光片氧化诱生缺陷的检验方法 Test method for detection of oxidation induced defects in polished silicon wafers71 GB/T 4059-1983 硅多晶气氛区熔磷检验方法 Polycrystalline silicon-Examination method-Zone-melting on phosphorus under controlled atmosphere 72 GB/T 4060-1983 硅多晶真空区熔基硼检验方法 Polycrystalline silicon-Examination method-Vacuum zone-melting on boron 73 GB/T 4061-1983 硅多晶断面夹层化学腐蚀检验方法 Polycrystalline silicon-Examination method-Assessment of sandwiches on cross-section by chemical corrosion 74 GB/T 4067-1983 金属材料电阻温度特性参数测量方法 Testing method for electrical resistance-temperature characteristic parameters of metallic materials 75 GB/T 4104-1983 直接法氧化锌白度 (颜色) 检验方法 Leucoscopic method for testing whiteness of zinc oxidemade by direct process 76 GB/T 4105-1983 钨丝下垂试验方法 Test method for sag of tungsten wire 77 GB/T 4106-1983 钨丝二次再结晶温度测量方法 Determination method for secondary recrystallization temperature of tungsten wire 78 GB/T 4107-1983 镁粉松装密度的测定 斯科特容量法 Magnesium powders-Determination of apparent density-Scott volumetric method 79 GB/T 4108-1983 镁粉、铝镁合金粉粒度组成的测定 干筛分法 Magnesium powders and aluminium-magnesium alloy powders-Determination of particle size by dry sieving method 80 GB/T 4156-1984 金属杯突试验方法 (厚度0.22mm) Metals-Cupping testing method (thickness 0.22mm) 81 GB/T 4157-1984 金属抗硫化物应力腐蚀开裂恒负荷拉伸试验方法 Sustained load tensile test method of metals for resi-stance to sulfide stress corrosion cracking 82 GB/T 4158-1984 金属艾氏冲击试验方法 The izod impact test on metals 83 GB/T 4160-1984 钢的应变时效敏感性试验方法 (夏比冲击法) Steel-strain ageing sensibility test (Charpy impact method) 84 GB/T 4161-1984 金属材料平面应变断裂韧度 Kic试验方法 Standard test method for plane-strain fracture toughness of metallic materials 85 GB/T 4162-1991 锻轧钢棒超声波检验方法 Forged and rolled steel barsMethod for ultrasonic examination 86 GB/T 4164-1984 金属粉末中可被氢还原氧含量的测定 Metallic powders-Determination of hydrogen reducible oxygen content 87 GB/T 4192-1984 电真空器件及电光源用钨、钼材料电阻率的测试方法 Method for the determination of the resistivity of tungsten and molybdenum used in electric light sources and vacuumtubes 88 GB/T 4193-1984 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes 89 GB/T 4194-1984 钨丝蠕变试验、高温处理及金相检查方法 Creep testing, high temperature treatment and metallographic examination of the tungsten wires 90 GB/T 4195-1984 钨钼粉末粒度分布测试方法 (沉降天平法) Method for measuring the distribution of the powder size of tungsten and molybdenum method by th balance for the fall of the particles 91 GB/T 4196-1984 钨钼条密度测定方法 Method for testing the density of tungsten and molybdenum bars 92 GB/T 4197-1984 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys 93 GB/T 4236-1984 钢的硫印检验方法 Steel-Examination by sulphur print (Baumann method) 94 GB/T 4296-1984 镁合金加工制品显微组织检验方法 Magnesium alloy wrought products-Microstructure-Inspection method 95 GB/T 4297-1984 镁合金加工制品低倍组织检验方法 Magnesium alloy wrought products-macrostructure-inspection method 96 GB/T 4326-1984 非本征半导体单晶霍尔迁移率和霍尔系数测量方法 Extrinsic semiconductor single crystals-measurement of Hall mobility and Hall coefficient 97 GB/T 4334.1-1984 不锈钢10%草酸浸蚀试验方法 Stainless steels-10Per-cent oxalic acid etch test 98 GB/T 4334.2-1984 不锈钢硫酸-硫酸铁腐蚀试验方法 Stainless steels-Ferric sulfate-sulfuric acid corrosion test 99 GB/T 4334.3-1984 不锈钢65% 硝酸腐蚀试验方法 Stainless steels-65er-cent nitric acid corrosion test 100 GB/T 4334.4-1984 不锈钢硝酸-氢氟酸腐蚀试验方法 Stainless steels-Nitric-hydrofluoric acid corrosion test 101 GB/T 4334.5-1990 不锈钢硫酸-硫酸铜腐蚀试验方法 Stainless steelsMethod of copper sulphate-Sulphuric acid corrosion test 102 GB/T 4334.6-1984 不锈钢5%硫酸腐蚀试验方法 Stainless steels-5per-cent sulfuric acid corrosion test 103 GB/T 4334.7-1984 不锈钢三氯化铁腐蚀试验方法 Stainless steels-ferric chloride corrosion test 104 GB/T 4334.8-1984 不锈钢42%氯化镁应力腐蚀试验方法 Stainless steels-42per-cent magnesium chloride corrosion test 105 GB/T 4334.9-1984 不锈钢点蚀电位测量方法 Stainless steel-Measurement of pitting potential 106 GB/T 4335-1984 低碳钢冷轧薄板铁素体晶粒度测定法 Cold rolled low-carbon steel sheet-Ferrite grain size-Test methods 107 GB/T 4337-1984 金属旋转弯曲疲劳试验方法 Metals-Rotating bar bending fatigue testing 108 GB/T 4338-1995 金属材料 高温拉伸试验 Metallic materials-Tensile testing at elevated temperature 109 GB/T 4339-1984 金属材料热膨胀特性参数测量方法 Metallic materials-Thermal expansion-Measuring method 110 GB/T 4340-1984 金属维氏硬度试验方法 Metallic materials-Vickers hardness test 111 GB/T 4341-1984 金属肖氏硬度试验方法 Metallic materials-Shore hardness test 112 GB/T 4342-1991 金属显微维氏硬度试验方法 Metallic materialsVickers microhardness test 113 GB/T 4462-1984 高速工具钢大块碳化物评级图 Standard figure of coarse carbide of high speed tool steel 114 GB/T 5026-1985 软磁合金振幅磁导率测量方法 The measurement method of amplitude permeability of soft magnetic alloys 115 GB/T 5027-1985 金属薄板塑性应变比 (值) 试验方法 Metallic sheets-Plastic strain ratio (-values) test method 116 GB/T 5028-1985 金属薄板拉伸应变硬化指数 (斜值) 试验方法 Metallic sheets-Tensile strain hardening exponents(n-values) test method 117 GB/T 5030-1985 金属小负荷维氏硬度试验方法 Metallic meterials-Low load Vickers hardness test 118 GB/T 5058-1985 钢的等温转变曲线图的测定方法 (磁性法) Steel-Determination of isothermal transformation diagram-Magnetic method 119 GB/T 5126-1985 铝及铝合金冷拉薄壁管材涡流探伤方法 Aluminum and aluminum alloy-Cold drawn thin-wall tubes-Eddy current inspection method 120 GB/T 5163-1985 可渗性烧结金属材料-密度的测定 Permeable sintered metal materials-Determination of density 121 GB/T 5164-1985 可渗性烧结金属材料-开孔率的测定 Permeable sintered metal materials-Determination of open porosity 122 GB/T 5165-1985 可渗性烧结金属材料-含油率的测定 Permeable sintered metal materials-Determination of oil content 123 GB/T 5167-1985 烧结金属材料和硬质合金电阻率的测定 Sintered metal materials and hardmetals-Determination of electrical resistivity 124 GB/T 5168-1985 两相钛合金高低倍组织检验方法 -Titanium alloys-Examination of structure 125 GB/T 5193-1985 钛及钛合金加工产品超声波探伤方法 Method of ultrasonic inspection for wrought titanium and titanium alloys products 126 GB/T 5225-1985 金属材料定量相分析 X射线衍射K值法 Metal materials-Quantitative phase analysis-Value Kmethod of X-ray diffraction 127 GB/T 5249-1985 可渗透性烧结金属材料 气泡试验 孔径的测定 Permeable sintered metal materials-Determination of bubble test pore size 128 GB/T 5250-1993 可渗透烧结金属材料 流体渗透性的测定 Permeable sintered metal materials-Determination of fluid permeability 129 GB/T 5252-1985 锗单晶位错腐蚀坑密度测量方法 Germanium monocrystal-Inspection of dislocation etch pit density 130 GB/T 5616-1985 常规无损探伤应用导则 Guidlines for application of conventional nondestructive testing methods 131 GB/T 5617-1985 钢的感应淬火或火焰淬火后有效硬化层深度的测定 Determination of effective depth of hardening after induction or flame hardening of steel 132 GB/T 5776-1986 金属材料在表面海水中常规暴露腐蚀试验方法 Method for surface seawater exposure corrosion tests of metallic materials 133 GB/T 5777-1996 无缝钢管超声波探伤检验方法 Seamless steel pipe and tubing-Methods for ultrasonic testing 134 GB/T 5778-1986 膨胀合金气密性试验方法 Determination of hermeticity of expansion alloys 135 GB/T 5985-1986 热双金属弯曲常数测量方法 Test method for flexivity constant of thermostat metals 136 GB/T 5986-1986 热双金属弹性模量试验方法 Test method for modulus of elasticity of thermostat metals 137 GB/T 5987-1986 热双金属温曲率试验方法 Test method for flexivity of thermostat metals 138 GB/T 6146-1985 精密电阻合金电阻率测试方法 Test method for resistivity of precision resistance alloys 139 GB/T 6147-1985 精密电阻合金热电动势率测试方法 Test method for thermoelectric power of precision resistance alloys 140 GB/T 6148-1985 精密电阻合金电阻温度系数测试方法 Test method for temperature-resistance coefficient of precision resistance alloys 141 GB/T 6396-1995 复合钢板力学及工艺性能试验方法 Clad plates-Machanical and technological test 142 GB/T 6397-1986 金属拉伸试验试样 Metallic materials-Test pieces for tensile testing 143 GB/T 6398-1986 金属材料疲劳裂纹扩展速率试验方法 Standard test method for fatigue crack growth rates of metallic materials 144 GB/T 6400-1986 金属丝材和铆钉的高温剪切试验方法 High temperature shear test method for metals wires and rivets 145 GB/T 6401-1986 铁素体奥氏体型双相不锈钢中- 相面积含量金相测定法 Micrographic method for determining area fraction of the -phases using charts in ferritic-austenitic stainless steels 146 GB/T 6402-1991 钢锻材超声波检验方法 Steel forgingsMethod for ultrasonic examination 147 GB/T 6521-1986 氧化铝粉末安息角的测定 Aluminium oxide powders-Measurement of the angle of repose 148 GB/T 6522-1986 氧化铝粉末松装密度的测定 Aluminium oxide powders-Determination of apparent density 149 GB/T 6523-1986 氧化铝粉末有效密度的测定 比重瓶法 Aluminium oxide powders-Determination of effective density-pyknometer method 150 GB/T 6524-1986 金属粉末粒度分布的测定-光透法 Determination of particle size distribution of metallic powders by method of photosedimentation 151 GB/T 6525-1986 烧结金属材料室温压缩强度的测定 Sintered metal materials-Determination of compression strength at room temperature 152 GB/T 6526-1986 自熔合金粉末固-液相线温度区间的测定方法 Self-fluxing alloy powders-Determination of solidus-liquidus temperature range 153 GB/T 6616-1995 半导体硅片电阻率及硅薄膜薄层电阻测定 非接触涡流法 Test method for measuring resistivity of semiconductor silicon or sheet resistance of semiconductor films with a noncontact eddy-current gage 154 GB/T 6617-1995 硅片电阻率测定 扩展电阻探针法 Test method for measuring resistivity of silicon wafers using spreading resistance probe 155 GB/T 6618-1995 硅片厚度和总厚度变化测试方法 Test method for thickness and total thickness variation of silicon slices 156 GB/T 6619-1995 硅片弯曲度测试方法 Test methods for bow of silicon slices 157 GB/T 6620-1995 硅片翘曲度非接触式测试方法 Test method for measuring warp on silicon slices by noncontact scanning 158 GB/T 6621-1995 硅抛光片表面平整度测试方法 Test methods for surface flatness of silicon polished slices 159 GB/T 6624-1995 硅抛光片表面质量目测检验方法 Standard method for measuring the surface quality of polished silicon slices by visual inspection 160 GB/T 6803-1986 铁素体钢的无塑性转变温度落锤试验方法 Standard method for conducting drop-weight test to determine nilductility transition temperature of ferritic steels161 GB/T 7314-1987 金属压缩试验方法 Metallic materials-Compression testing 162 GB/T 7732-1987 金属板材表面裂纹断裂韧度Kle试验方法 Standard test method for surface-crack fracture toughness Kle of metallic plates 163 GB/T 7733-1987 金属旋转弯曲腐蚀疲劳试验方法 Metals-rotating bar bending corrosion fatigue testing 164 GB/T 7734-1987 复合钢板超声波探伤方法 Method for ultrasonic testing of clad steel plates 165 GB/T 7735-1995 钢管涡流探伤检验方法 Steel tubes-The inspection method on eddy current test 166 GB/T 7736-1987 钢的低倍组织及缺陷超声波检验法 Ultrasonic inspecting method for macro-structure and imperfection of steel 167 GB/T 7963-1987 烧结金属材料(不包括硬质合金) 拉伸试样 Sintered metal materials (excluding hardmetal)-Tensile test pieces 168 GB/T 7964-1987 烧结金属材料(不包括硬质合金) 室温拉伸试验 Sintered metal materials (excluding hardmetal)-Tension testing at room temperature 169 GB/T 7997-1987 硬质合金维氏硬度试验方法 Hardmetals-