脚手架搭设作业安全风险分析(JSA).doc

LOGOLOGO项目名称Document No.HSE-JSA-003SL #SEQUENCE OF BASICJOB STEPSPOTENTIAL HAZARDSREQUIRED HAZARDS CONTROL01 场地评估Working place evaluation人员培训Personnel training 检查设备Equipment inspection检查材料Material inspection 场地不合格 Working place not qulified 人员未培训Personnel not training 设备不合格Equipment not qualified 材料不全Lack of material1、平整场地至平坦状态（第一步脚手架每根立杆下方H钢平坦铺设即可）1.flettening working place(shimming the bottom of scaffolding)2.评估作业人员资质，要求执证上岗 Evaluating the personnel certification3、检查作业设备是否合格Checking the equipment and qualified4、检查作业材料是全、合格Checking constrcution material and qualified02搭设脚手架scaffolding高空坠落Persons falling from the high position高空坠物Material falling from high position坍塌collapse碰伤Hurt搭设不规范Erection of non-standard绊倒stumble1) 作业人员要求佩戴PPE围护和监护人The operator is required to wear PPE enclosure and guardian2) 遇到大雾、大雨和五级以上大风时，要停止高处作业Encountered heavy fog, heavy rain and more than five winds, to stop high work3) 作业时要带好工具袋，暂时不用的工具，装入工具袋 you work with a tool bag for temporarily unused tools.4) 各种物料用系绳或溜放的方法放到地面，不得向下抛掷物料All kinds of materials by means of the tether or rolling to the ground, not to throw down the material5) 作业人员不得相互嬉戏打闹，以免失足发生坠落事故 Operators should not play with each other , so as not to stumble fall accident occurred6) 高处作业时，高度大于1.8米要正确穿挂安全带，并有牢固挂点When working in height, the height of more than 1.8 meters to wear the safety belt, and have a solid hanging point7) 安全带高挂低用，要有牢固挂点harness hanging high for low position to use, to have a solid hanging point8) 严格按脚手架验收标准搭设Strictly in accordance with the acceptance criteria for scaffolding erection1 立杆间距1.5mPole spacing 1.5m2 横杆间距1.8mBar spacing 1.8m3 直爬梯间距0.3mStraight ladder spacing is less than or equal to 0.3m11） 作业完成，清扫现场Complete the work, clean the sceneComplete the work, clean the scene03环境凌乱Messy environment物料散放Material dispersion作业完成，应将剩余物料整理入库When the work is completed, the remaining materials should be stored in the warehouse将地面打扫干净，材料摆放整齐Clean the floor and put the materials in orderUnloading for goods and materials: 脚手架搭设作业Scaffolding erection workWor