半导体WB制程 SSB线弧.pdf

1 3/31/98 Kulicke and Soffa Industries, Inc. 2101 Blair Mill Road, Willow Grove PA 19090 USA Stand-off Stitch Bond turbo Software Part Number 01488-8019-801-# plus Software Part Number 01488-8104-801-# The information in this document is the property of Kulicke LF2 StandardBOND: Default SCAN: Prev NextTo Change IMPACT PROFILE -350-A grams(50-750) IMPACT TIME -0-B no units(0-250) CAPILLARY OFFSET - -15 - D tenth-mils(-50-100) 8 Kulicke and Soffa Industries, Inc. 2101 Blair Mill Road, Willow Grove PA 19090 USA Getting Started Stand-off Stitch Bond The Stand-off Stitch Bond process can be programmed on an individual wire, group of wires or all wires basis. For each SSB wire there are 4 bonds, however only two wire bonding or loop bond locations are taught, bonds 3 and 4. Bump Bonds 1 MTC, jam sensor, BGA Optics, low-pressure and low-vacuum detection, Flex-Line) ?Enhanced processes (i.e.; Kinetic 2nd Bond, Step Configurable Lockouts and alarms, 20 character names) ?Auto VLL Teach ?1.53, 1.54, 1.55 1488/turbo PRS software support 1.65 1488plus PRS software support ?Fine Pitch VLL (software option) ?AIM (inspection hardware/software option) (only on the turbo) Note: Refer to the appropriate Software Change Summary , for a current list of op