电子星系工程pic程序.doc

#include#include #define RSPIN PORTBbits.RB5 /Data or Instrument Select#define RWPIN PORTBbits.RB4 /Write or Read#define EPIN PORTBbits.RB3 /6800 mode Enable single#define INPUT PORTBbits.RB2#define cold PORTBbits.RB6#define warm PORTBbits.RB7#define STS PORTAbits.RA0#define CS PORTAbits.RA1#define A0 PORTAbits.RA2#define CE PORTAbits.RA3#define RC PORTAbits.RA4void InterruptHandlerHigh (void);#define uchar unsigned char/宏定义#define uint unsigned int#defineK_UP 0X20/定义键值#defineK_DOWN 0X21#defineK_CLEAR 0X24#defineK_OK 0X25#defineK_ONE 0X30#defineK_FOUR 0X31#defineK_SEVEN 0X32#defineK_POINT 0X33#defineK_TWO 0X34#defineK_FIVE 0X43#defineK_EIGHT0X36#defineK_ZERO0X37#defineK_THREE0X38#defineK_SIX 0X40#defineK_NINE0X41#defineK_SET 0X42#includekey.h/全局变量/unsigned int Timeout;float TEMP_NOW=0.0;float TEMP_SET=21.0;uint T_Count=0;uint S_Count=0;uint P_Count=0;uint N_Count=0;uint M_Count=1;uchar Current_Temp_Display_Buffer= NOW:-23.5 ;uchar set_Temp_Display_Buffer= SET: 21.0 ;int sel=0;void Comparison();/定时/void timer0_init(void) Timeout = 0; INTCON = 0x20; /disable global and enable TMR0 interrupt INTCON2 = 0x84; /TMR0 high priority RCONbits.IPEN = 1; /enable priority levels TMR0H = 0; /clear timer TMR0L = 0; /clear timer T0CON = 0x82; /set up timer0 - prescaler 1:8 INTCONbits.GIEH = 1; /enable interrupts TRISD = 0; /* configure PORTD for output */ PORTD=0X00; if (Timeout = 1) /timeout? Timeout = 0; /clear timeout indicor Read_Temperature(); Display_Temperature() ; N_Count=1; / High priority interrupt vector/PIC 中断标准服务程序#pragma code InterruptVectorHigh = 0x08 /中断向量voidInterruptVectorHigh (void) _asm goto InterruptHandlerHigh /jump to interrupt routine _endasm/-/ High priority interrupt routine/中断服务程序#pragma code#pragma interrupt InterruptHandlerHighvoidInterruptHandlerHigh () if (INTCONbits.TMR0IF) /check for TMR0 overflow INTCONbits.TMR0IF = 0; /clear interrupt flag Timeout = 1; /indicate timeout void Comparison()if(N_Count&M_Count)if(TEMP_NOWTEMP_SET)cold=1;warm=0;if(TEMP_NOW=TEMP_SET)cold=0;warm=0;uchar int_LM20(); void Read_Temperature();void Display_Temperature();void ad_convertor()float temp;OpenADC( ADC_FOSC_32 & ADC_RIGHT_JUST & ADC_8ANA_0REF, ADC_RA0 & ADC_INT_OFF );/ A/D 时钟源,晶振32分频率/ A/D 转换结果右对齐/ A/D 参考电压源，电源工作电压/ 通道选择/ 中断关闭，查询模式Delay10TCYx( 5 ); / Delay for 50TCYConvertADC(); / Start conversionwhile( BusyADC() ); / Wait for completiontemp = ReadADC(); / Read resultCloseADC(); / Disable A/D converterNop();Temp_Value0=temp/256;Temp_Value1=temp%256;void Display_Temperature()uchar t = 150, ng = 0;if(Temp_Value1&0xf8)=0xf8) Temp_Value1 = Temp_Value1;Temp_Value0 = Temp_Value0+1;if(Temp_Value0=0x00)Temp_Value1+;ng = 1;Display_Digit0 = df_TableTemp_Value0&0x0f;CurrentT = (Temp_Value0&0xf0)4) | (Temp_Value1&0x07)4);Display_Digit3 = CurrentT/100;Display_Digit2 = CurrentT%100/10;Display_Digit1 = CurrentT%10;Current_Temp_Display_Buffer11 = Display_Digit0 + 0;Current_Temp_Display_Buffer10 = .;Current_Temp_Display_Buffer9 = Display_Digit1 + 0;Current_Temp_Display_Buffer8 = Display_Digit2 + 0;Current_Temp_Display_Buffer7 = Display_Digit3 + 0;TEMP_NOW=Display_Digit2*10+Display_Digit1+Display_Digit0*0.1 ;if(Display_Digit3 = 0)Current_Temp_Display_Buffer7 = ;if(Display_Digit2 = 0&Display_Digit3=0)Current_Temp_Display_Buffer8 = ;if(ng)TEMP_NOW=-(Display_Digit2*10+Display_Digit1+Display_Digit0*0.1); if(Current_Temp_Display_Buffer8 = )Current_Temp_Display_Buffer8 = -;else if(Current_Temp_Display_Buffer7 = )Current_Temp_Display_Buffer7 = -;else Current_Temp_Display_Buffer6 = -; unsigned char Keys_Scan();void set_num();void set();void Delay_key();uchar Keys_Scan();uchar code KeyCodeTable= 0xEE,0xED,0xEB,0xE7,0xDE,0xDD,0xDB,0xD7,0xBE,0xBD,0xBB,0xB7,0x7E,0x7D,0x7B,0x77;void Delay_key() uchar i;for(i=0;i47)&(set_Temp_Display_Buffer1147)&(set_Temp_Display_Buffer947)&(set_Temp_Display_Buffer848)&(set_Temp_Display_Buffer1148)&(set_Temp_Display_Buffer948)&(set_Temp_Display_Buffer858) set_Temp_Display_Buffer8-=1;else if(set_Temp_Display_Buffer8=48) set_Temp_Display_Buffer8=57; if(K_ONE = key)while(Keys_Scan() = K_ONE);set_Temp_Display_Buffer11=1;sel+;if(K_TWO = key)while(Keys_Scan() = K_TWO);set_Temp_Display_Buffer11=2;sel+;if(K_THREE = key)while(Keys_Scan() = K_THREE);set_Temp_Display_Buffer11=3;sel+;if(K_FOUR = key)while(Keys_Scan() = K_FOUR);set_Temp_Display_Buffer11=4;sel+;if(K_FIVE = key)while(Keys_Scan() = K_FIVE);set_Temp_Display_Buffer11=5;sel+;if(K_SIX = key)while(Keys_Scan() = K_SIX);set_Temp_Display_Buffer11=6;sel+;if(K_SEVEN = key)while(Keys_Scan() = K_SEVEN);set_Temp_Display_Buffer11=7;sel+;if(K_EIGHT = key)while(Keys_Scan() = K_EIGHT);set_Temp_Display_Buffer11=8;sel+;if(K_NINE = key)while(Keys_Scan() = K_NINE);set_Temp_Display_Buffer11=9;sel+;if(K_ZERO = key)while(Keys_Scan() = K_ZERO);set_Temp_Display_Buffer11=0;sel+;if(K_OK = key)while(Keys_Scan() = K_OK);TEMP_SET=(set_Temp_Display_Buffer8-48)*10+(set_Temp_Display_Buffer9-48)+(set_Temp_Display_Buffer11-48)*0.1;sel=0;M_Count=1;if(sel=1)key = Keys_Scan();if(K_CLEAR = key)while(Keys_Scan() = K_CLEAR);set_Temp_Display_Buffer8 = ;set_Temp_Display_Buffer9 = ;set_Temp_Display_Buffer10= ;set_Temp_Display_Buffer11= ; M_Count=0;cold=0;warm=0;sel=0; if(K_ONE = key)while(Keys_Scan() = K_ONE);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=1;sel+;if(K_TWO = key)while(Keys_Scan() = K_TWO);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=2;sel+;if(K_THREE = key)while(Keys_Scan() = K_THREE);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=3;sel+;if(K_FOUR = key)while(Keys_Scan() = K_FOUR);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=4;sel+;if(K_FIVE = key)while(Keys_Scan() = K_FIVE);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=5;sel+;if(K_SIX = key)while(Keys_Scan() = K_SIX);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=6;sel+;if(K_SEVEN = key)while(Keys_Scan() = K_SEVEN);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=7;sel+;if(K_EIGHT = key)while(Keys_Scan() = K_EIGHT);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=8;sel+;if(K_NINE = key)while(Keys_Scan() = K_NINE);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=9;sel+;if(K_ZERO = key)while(Keys_Scan() = K_ZERO);set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=0;sel+;if(sel=2)key = Keys_Scan(); if(K_CLEAR = key)while(Keys_Scan() = K_CLEAR);set_Temp_Display_Buffer8 = ;set_Temp_Display_Buffer9 = ;set_Temp_Display_Buffer10= ;set_Temp_Display_Buffer11= ; M_Count=0;cold=0;warm=0;sel=0; if(K_POINT = key)while(Keys_Scan() = K_POINT);set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=.;sel+;if(sel=3)key = Keys_Scan(); if(K_CLEAR = key)while(Keys_Scan() = K_CLEAR);set_Temp_Display_Buffer8 = ;set_Temp_Display_Buffer9 = ;set_Temp_Display_Buffer10= ;set_Temp_Display_Buffer11= ; M_Count=0;cold=0;warm=0;sel=0; if(K_ONE = key)while(Keys_Scan() = K_ONE);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=1;sel+;if(K_TWO = key)while(Keys_Scan() = K_TWO);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=2;sel+;if(K_THREE = key)while(Keys_Scan() = K_THREE);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=3;sel+;if(K_FOUR = key)while(Keys_Scan() = K_FOUR);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=4;sel+;if(K_FIVE = key)while(Keys_Scan() = K_FIVE);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=5;sel+;if(K_SIX = key)while(Keys_Scan() = K_SIX);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=6;sel+;if(K_SEVEN = key)while(Keys_Scan() = K_SEVEN);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=7;sel+;if(K_EIGHT = key)while(Keys_Scan() = K_EIGHT);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=8;sel+;if(K_NINE = key)while(Keys_Scan() = K_NINE);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=9;sel+;if(K_ZERO = key)while(Keys_Scan() = K_ZERO);set_Temp_Display_Buffer8=set_Temp_Display_Buffer9 ;set_Temp_Display_Buffer9=set_Temp_Display_Buffer10 ;set_Temp_Display_Buffer10=set_Temp_Display_Buffer11 ;set_Temp_Display_Buffer11=0;sel+;if(sel=4)key = Keys_Scan(); if(K_CLEAR = key)while(Keys_Scan() = K_CLEAR);set_Temp_Display_Buffer8 = ;set_Temp_Display_Buffer9 = ;set_Temp_Display_Buffer10= ;set