公司司机岗位职责.doc

肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀羂肃蒁蕿蚁袅莇薈螄肁芃薇袆袄腿蚆薆聿肅蚅蚈袂莄蚄袀肇莀蚄羃羀芆蚃蚂膆膂蚂螅罿蒀蚁袇膄莆螀罿羇节蝿虿膂膈莆螁羅肄莅羃膁蒃莄蚃肃荿莃螅艿芅莂袈肂膁莂羀袅蒀莁蚀肀莆蒀螂袃节葿袄肈膈蒈薄袁膃蒇螆膇蒂蒆衿罿莈蒆羁膅芄蒅蚀羈膀蒄螃膃肆薃袅羆莅薂薅膁芁薁螇羄芇薀衿芀膃薀 司 机 岗 位 职 责 第一条 公司司机必须遵守中华人民共和国道路交通管理条例及有关交通安全管理的规章规则，遵守公司员工管理手册，安全驾车。同时遵守本公司其他相关的规章制度。 第二条 司机应爱惜公司车辆，平时要注意车辆的保养，经常检查车辆的主要机件。每月至少用半天时间对自己所开车辆进行检修，确保车辆正常行驶。 第三条 司机应每天抽适当时间擦洗自己所开车辆，以保持车辆的清洁(包括车内、车外和引擎的清洁)。第四条 出车前，要例行检查车辆的水、电、油及其他性能是否正常，发现不正常时，要立即加补或调整。出车回来，要检查存油量，发现存油不足一格时，应立即加油，不得出车时才临时去加油。第五条 司机发现所驾车辆有故障时要立即检修。不会检修的，应立即报告车队长，并提出具体的维修意见(包括维修项目和大致需要的经费等)。未经批准，不许私自将车辆送厂维修，违者费用不予报销。 第六条 出车在外或出车归来停放车辆，一定要注意选取停放地点和位置，不能在不准停车的路段或危险地段停车。司机离开车辆时，要锁好保险锁，防止车辆被盗。钥匙及行驶证交给管理人员。不准私自用车。 第七条 司机对自己所开车辆的各种证件的有效性应经常检查，出车时一定保证证件齐全。第八条 晚间司机要注意休息，不准开疲劳车，不准酒后驾车。 第九条 司机酒后驾车或私自用车造成的一切违章或交通事故后果均由司机本人承担，并给予行政处罚。 第十条 司机驾车一定要遵守交通规则，文明开车，不准危险驾车(包括高速、追尾、争道、赛车等)。对于旁人包括公司领导的指令，司机认为不能做到的，可以提出异议，请求变更指令。行车途中如发生交通事故，能适用快速处理的，应采用快速处理方式解决；如必须现场处理，应当立即报警待处，不得逃离现场。如因违反交通规则而发生事故的，司机应承担全部后果和责任。 第十一条 司机因违章或证件不全被罚款的，当月罚款金额超过60元的，超过部分不予报销。违章造成事故的由当事司机承担责任和后果。 第十二条 车内不准吸烟。本公司员工在车内吸烟时，应当即有礼貌地制止；公司外的客人在车内吸烟时，可婉转告知本公司陪同人，但不能直接制止。 第十三条 司机对乘车人要热情、礼貌，说话应文明。车内客人谈话时，除非客人主动搭话，不准随便插嘴。 第十四条 公司用车时，要准时出车，不得误点。出车后，按要求作好行车记录，详细记录行车时间、里程、起始地、乘坐人姓名、事由等，并由乘坐人签字确认（如仅有公司外客人乘坐，由安排人员签字确认），次日将行车记录交管理人员审核签章。每月末按乘坐人或部门统计当月行车里程总数，各部门合计数应与当月总行驶里程一致，不一致则由驾驶员承担多余里程。 第十五条 上班时间内司机未被派出车的，应随时在司机室等候出车。不准随便乱窜其他办公室。有要事确需离开司机室时，要告知管理人员去向和所需时间，经批准后方可离开；出车外出回来，应立即到管理人员处报到。 第十六条 司机对管理人员的工作安排，应无条件服从，不准借故拖延或拒不出车。对工作安排有意见的，事后可向上级领导反映。 第十七条 司机出车执行任务，遇特殊情况不能按时返回的，应及时设法通知管理人员，并说明原因。第十八条 公司每月给予司机手机补贴50元。任何时候，司机必须随身携带手机。对公司领导或管理人员的呼叫，应立即应答。情况特殊确实不能应答的，事后一定要说明原因。当月三次以上通讯联系不上，取消该月手机使用补贴费。 第十九条 司机未经领导批准，不得将自己保管的车辆随便交给其他人驾驶；如公司领导批准同意将车交给其他驾驶员驾驶，当事司机应负责检查借车人是否具有合法的驾驶资格（包括驾照有效期、车型及驾照真实性）；严禁将车辆交给无证人员驾驶或练习开车；任何人不得利用公司车辆学开车。第二十条 司机全年安全行车，未出交通事故的，给予奖励2000元，年终奖发放时兑现。若发生交通事故，经车辆保险部门理赔后公司仍要承担损失的，损失金额超过2000元的，取消奖励；损失2000元以内的，减去实际损失后的剩余部分作为奖励。 第二十一条 由人事部门每年负责对司机进行考核，将考核等级作为下一年调整岗位工资的依据之一。对于工作勤奋、遵守制度、表现突出的，可视具体情况给予嘉奖、记功、晋级等奖励；对工作怠慢、违反制度、发生事故者，视具体情节给予警告、记过、降级直至除名处理。 第二十二条 工资待遇：试用期工资，按双方商定的工资标准执行。正式录用后，按照公司薪资管理制度，司机每年实行岗位等级聘任制度，基本工资加岗位工资在1200-1500元/月之间，初始岗位等级由公司管理人员确定，以后按年度考核的成绩，决定薪资等级的升降。加班以小时计，累计8小时为一天，按公司加班规定计入当月加班费中。因特殊情况，当天工作时间延迟1小时以内的，不计入加班。每月末统计当月加班情况并注明加班乘坐人。 第二十四条 费用报销：司机所有因公费用（停车费、过路费、加油、修理等等）必须以正式有效凭证作为报销凭证，由驾驶员整理粘贴报销凭证后交管理人员审核签字，再交总经理签字，方可报销。原则上一周报销一次。每月末汇报当月报销情况，以及停车费、过路费使用人。 第二十五条 违反本管理规定第一、二、三、四条款，用车保养不当,予以口头警告处分，两次以上书面警告处分，三次以上记过并扣罚当月奖金40元。因保养不当造成重大事故的，另外承担相应责任和后果。 oduce eht with the main supply power interrupted. do not rely on a contactor elsewhere in the system to interrupt it, your life coulddepend upon it ! 1.3 specification1.3.1functional description specified here as a cp160.the generator is designed to power a unipolar sealed x-ray tube up to 160kv at 3,2kw with controlled dual filament supplies isolated to the eht potential. the generator consists of two major elements, an eht tank and a converter chassis.the eht tank contains all the high voltage circuitry required to produce eht output together with dual filament isolation transformers. the high voltage isolation is obtained by means of resin encapsulation and transformer oil e.g.shell dialabgimmersion.the converter chassis unit fits directly onto the eht tank. it contains all the electronic circuitry to produce the controlled 3,2kw drive for the eht supplytogether withthe drives for the dual filament transformers.cpmanc.doc(c) gulmay ltd 2000page 10 of 44cp technical manual1.3.2physical descriptionthe converterchassis is secured to the top of the eht tank.their total dimensions are given below. the eht output connector is mounted at one end of the eht tank. the power andcontrol connectors are mounted at the same end as the output connector but on theconverter chassis.dimensions (cp160 unit) (cp102 unit)412 660 610 216mm wide mm long mm high (+100 mm if wheels fitted) kg weight (approx.)dimensions(cp225 unit)420 810 660 240mm wide mm long mm high (+100 mm if wheels fitted) kg weight (approx.)dimensions(anode tank) 412 660 440 156 mm wide mm long mm high (+100 mm if wheels fitted) kg weight (approx.)cpmanc.doc(c) gulmay ltd 2000page 11 of 44cp technical manual1.3.3electrical specification main supply voltage power auxiliary supply voltage power output power output voltage220 v ac +/- 10% 47-63 hz. 6 kva maximum.220 v ac +/- 10% 47-63 hz. 100 va 3200 w maximum 5 to 160 kv (negative) (225kv cp225) 10 to 320 kv bipolar with anode tank. 5 to 100 kv with cp102 30 micro-amps to 30 milli-amps to 75 ma with cp102output currenthigh frequency output ripple & line frequency output ripple voltage stability (after 1 hr warm up) current stability (after 1 hr warm up) voltage reproducibility currentreproducibilitytotal ripple envelope is 300 v pk to pk at full rated output. short term - 0.05%/hr of set value long term - 0.1%/hr of set value short term - 0.05%/hr of set value long term - 0.1%/hr of set value 0.1%0.1%voltage accuracycurrent accuracy2% 1% output voltage will change less than 0.1% with a 10% change in input line voltage over a period of at least 10 secs. output voltage will change less than 0.1% over the operating current range. output current will change less than 0.1% over the operating voltage range.regulation (line)regulation (load)cpmanc.doc(c) gulmay ltd 2000page 12 of 44cp technical manualoutput rise time output fall time20 kv per second. 4 second decay time constant with no load. 1 second time constant with a 640 microamp residual tube current at 160 kv. 8.5 v 4.5 a.filament output large focal spot filament output small focal spot output connector6 v 4.5 a160 kv standard european (cp160,cp102) 200 kv 20g c005 (cp225) 25 db male connectorinterface connector power connector demand signalsamphenol 97-3102a-24-11p0-10 vdc 10 v = 200 kv (10v=400kv with anode tank) 10 v = 280 kv (cp225) 10 v = 50 ma (cp160,cp225) 10 v = 100ma (cp102) 0-10 vdc 10 v = 200 kv (10v=400kv with anode tank) 10 v = 280kv (cp225) 10 v = 50 ma (cp160,cp225) 10 v = 100ma (cp102)monitor signalscpmanc.doc(c) gulmay ltd 2000page 13 of 44cp technical manualinterface functionskv on (x ray on) (control) interlock (control) broad/fine select (control) 12 v ref. 0v digital 0v analogue kv demand ma demand kv monitor ma monitor filament power limit (control) over ma (status) over kv (status) converter over current (status) converter over voltage (status) 320/160 (status) broad/fine (status) kv on (x ray on) (status)cpmanc.doc(c) gulmay ltd 2000page 14 of 44cp technical manual1.3.4interface connectionthe interface connections are as follows:-pin 1 14 2 15 316designation n/c n/c x ray on (control) over ma converter o/current n/c n/c over kv x ray on (status) converter o/voltage 0v (analogue ma monitor kv monitor n/c interlock 12 v reference fil. power limit kv demand ma demand n/c broad/fine select 320/160 status broad fine status n/c digital 0vi or od or ai o od d d417518o o o o o i o i i i i o od d d a a d a a a a d d d619720821922 10 23 11 24 12 25 13note:o output i input a analogue d digital impedance definitions pleasen.b. for circuit interface details and voltage and request drawing number cp1/010 from the factory.cpmanc.doc(c) gulmay ltd 2000page 15 of 44cp technical manual1.3.5power connectionauxiliary supply main supply100va 6 kvathe power connector pins are connected as follows:-pin a= auxiliary power live pin b= isolated cct. earth pin c= auxiliary power neutral pin d= main power live pin e= chassis earth pin f= main power neutraln.b. these must be derived from the same phase the auxiliary and main supplies should be derived from an interface control unit in such a way that the auxiliary supply is fed all the time and the main supply isinterrupted via a door switch or safety contactor when eht output is not required.see fig 2.0 for recommended wiring.cpmanc.doc(c) gulmay ltd 2000page 16 of 44cp technical manual2.0 2.1installation introduction installation should only be carried out by designated employees of companies assemble the final system and who have been trained by gulmay ltd. who2.2power supply in the converter chassis the auxiliary supply transformer has three voltage tappings:200 vac 220 vac 240 vacthe correct tapping should be set with reference to fig 4.0, this transformer is in theauxiliary psu assembly. 2.3 earthingthere is a bonding earth stud (m8) on the generator tank under the high voltage output receptacle. connect a 10mm earth braid from the stud to a suitable (100a)protective earth point. if an anode tank is being installed it should be similarly bonded. now proceed to install the generator end of the eht cable. 2.4 cable installationthe high voltage and filament power are supplied by a high voltage cable from the receptacle in the generator tank. in order to prevent voltage flash overs in the socket , the termination of the cable has to be carefully greased with an appropriatehighvoltage insulating grease. (dow corning ms 4)discharge any static from the cable end to a suitable earthpoint . make sure there is a uniform layer ofrubber parts of the termination and that allgrease withoutany airbubbleson allmetal parts used for electrical contact areclean.as you enter the cable end into the receptacle rotate the cable back and forward to distribute grease. unscrew the flange on the cable sufficiently for there to be 4mm of gap between the two flanges with the cable fully home. screw in the four fixing screws gradually in rotation to compress the cable end evenly. there shouldnow be no gap between the receptacle and cable flanges.cpmanc.doc(c) gulmay ltd 2000page 17 of 44cp technical manual2.5power connection see fig 2.0 for a recommended circuit for power and system earthing. the auxiliary power must be supplied via cable rated at 250v and 5a.the main power must be supplied via cable rated at 250 v and 30a.both of these power supplies must be terminated in a single free socket type 973106a-24-11s manufactured by amphenol.itis essential that the main and auxiliary supplies arederivedfrom the same phase.itisimportant for safety reasons that the main supplycan beinterrupted by a safety switch so that theregenerating high-voltages when they areisno chance ofnot required.with the main supply interrupted, apply auxiliary power, fans should be heard insidethe converter chassis.check that the resistance between tp1 on the control pcb and a chassis or tankearth point is less than 200 mohm. this verifies the earthing of the circuit 0v.main power may now be switched on and the generator andtube may be run up within the tube manufacturers guidelines. this must be controlled from a radiation-safe enclosure. the filament limit may require adjustment at this stage. see section anode tank installation in a 320kv system an anode tank will be needed. attach first the earth lead as in 2.3. install the eht cable as in 2.4.connect the anode tank flying power/interface lead to sk4 on the rear of theconverter chassis. see fig 4.1 for position of sk4.cpmanc.doc(c) gulmay ltd 2000page 18 of 44cp technical manual3.1system description interconnection diagram cp2-012 a simplified block diagram is shown in fig 3.0. single phase power is fed into aphase controller and then into an averaging filter comprising l and c. control signals from the electronics vary the conduction angle of the phase controller to varythe d.c.voltage across capacitor c.the output eht is directly proportional to the voltage across c and is controlled by it. it is marked, controlled dc line.the voltage is fed into a high frequency inverter which produces a sine wave drive (25 khz) to the eht step up transformer. connected to the transformer is a 10 stage voltage multiplier providing the full output voltage of 160kv. this voltage is fed via a standard european 160 kv high voltage receptacle and cable to the x-raytube.common to the high voltage output is the filament drive voltage. this is an isolated supply which is controlled electronically to stabilise the beam current ofthe x-ray tube against changes in theac supply and the high-voltage output.the electronic control circuits are linked by an interface cable to the system electronics which are not part of the generator. signals are sent down this cable toset the operating parameters of the generator and to read the status of the generator.both output voltage and current are fully programmable. internal circuitry limitsthe ma