JUKI机的错误代码.doc

JUKI机的错误代码E250001Emergenoy stop switch has been pressed已按下紧急停止开关。E25OO2Gopy pneumatic pressure has dropped Do you ignoreit?气动压力有所下降。Will return to Home position是否回原点。Z2020Return to Home position is not finished yet返回到初始位置尚未完成。E007001Origin retrieval has not yet been completed原产地检索尚未完成。W210001Remove nozzle and returnit to the previous position on ATC删除吸嘴，并回到先前的ATC位置上.E200092Origin retriexal is interrupted since error has occurrd when checking nozzle during origin retrievalTurn OFF the power to the machine and perfom inspecton原产地检索中断已经发生错误，请关闭电源检查吸嘴对机器执行检查。E004219Return to home has not yet been completed返回首页尚未完成。E004225MTC is disableMTC 是禁用的。Q004301Rxit machine setup Set value is aved退出机器的设置保存设定值。E006049It failed to the centering by laser lode;98.75 confirm pick position or comonent data 激光代码中心失败，98.75 确认跳位置或组件的数据大纲合适位置算法E24013Noozle attaching proccess error the process has been carrid out theugh nozzle has been already set in positon.吸嘴连接过程中出现错误，这个过程已经走出设置位置。E240013Nozzle attatachin process error the process has been carred out though nozzle has been alredy setin position吸嘴连接过程中出现错误，虽然吸嘴已经到了百分之位置Q004304Error has occurred during nozzle more to parking possition?错误发生在吸嘴的附件 移动停车位置E202293Orrgin retrieval is interrupted since errof of right head lassr has occurred when checking nozzle during origh retrieval tum OFF the power to the machine and perform inspection产地与右激光头中断 期间发生错误检索 解决方法；拿棉签清洁镭射激光头E251246Z axis of righe head LM628 alarmcposition error turn OFF the power to the machiie and