佛山市顺德家具研究开发院有限公司检测中心.doc

ISO/IEC 17025 认可证书 CNAS-PD19/06-A/3 中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS L5016）名称: 佛山市顺德家具研究开发院有限公司检测中心地址：广东省佛山市325国道顺德龙江路段亚洲国际家具材料交易中心C1排01-26号签发日期：2011年03月24日 有效期至：2014年03月23日更新日期：2011年03月24日附件1 认可的检测能力范围序号检测对象项目/参数领域代码检测标准（方法）名称及编号（含年号）限制范围说明序号名称1皮革1抗张强度和伸长率0222.02皮革 物理和机械试验 抗张强度和伸长率的测定 QB/T 2710-20052撕裂力0222.02皮革 物理和机械试验 撕裂力的测定：双边撕裂 QB/T 2711-20053涂层粘着牢度0222.02皮革 涂层粘着牢度测定方法GB/T 4689.20-19964pH值0222.01皮革 化学试验 pH的测定QB/T 2724-20055甲醛含量0222.01皮革和毛皮 化学试验 甲醛含量的测定 GB/T 19941-2005只用分光光度法1皮革6禁用偶氮染料0222.01皮革和毛皮 化学试验 禁用偶氮染料的测定 GB/T 19942-20057五氯苯酚含量0222.01皮革和毛皮 化学试验 五氯苯酚含量的测定 GB/T22808-20082家具用皮革1部分项目0222家具用皮革 GB/T 16799-2008只测抗张强度和伸长率、撕裂力、涂层粘着牢度、pH值、甲醛含量、禁用偶氮染料、五氯苯酚含量3软质泡沫聚合材料1表观密度0221.05泡沫塑料及橡胶 表观密度的测定 GB/T 6343-20092压缩永久变形0315.11软质泡沫聚合材料 压缩永久变形的测定 GB/T 6669-2008只用方法A和方法C3拉伸强度和断裂伸长率0315.02软质泡沫聚合材料 拉伸强度和断裂伸长率的测定 GB/T 6344-20084压陷性能0315.06软质泡沫聚合材料 硬度的测定（压陷法） GB/T 10807-2006只用方法B5撕裂强度0315.03高聚物多孔弹性材料 撕裂强度的测定 GB/T10808-20064高回弹软质聚氨酯泡沫塑料1部分项目0221高回弹软质聚氨酯泡沫塑料QB/T 2080-2010只测：密度、压陷硬度(25%)、压陷比、拉伸性能和断裂伸长率、撕裂强度、75%压缩变形5通用软质聚醚型聚氨酯泡沫塑料1部分项目0221通用软质聚醚型聚氨酯泡沫塑料 GB/T 10802-2006只测：压缩永久变形、拉伸强度和断裂伸长率、压陷硬度、撕裂强度6纺织品1断裂强力0312.02纺织品 织物拉伸性能 第1部分：断裂强力和断裂伸长率的测定 条样法 GB/T 3923.1-19972撕破强力0312.03纺织品 织物撕破性能 第2部分：裤形试样（单缝）撕破强力的测定 GB/T 3917.2-20093水洗尺寸变化率0224.09纺织品 洗涤和干燥后尺寸变化的测定GB/T 8630-20024干洗尺寸变化率0224.09使用粘合衬服装耐干洗测试方法 FZ/T 80007.3-20065耐洗色牢度0224.07纺织品 色牢度试验 耐皂洗色牢度 GB/T 3921-20086耐干洗色牢度0224.07纺织品 色牢度试验 耐干洗色牢度 GB/T 5711-19977pH值0224.03纺织品 水萃取液pH值的测定 GB/T 7573-20098甲醛含量0224.03纺织品 甲醛的测定 第1部分：游离和水解的甲醛（水萃取法） GB/T 2912.1-20099禁用偶氮染料0224.03纺织品 禁用偶氮染料的测定GB/T 17592-20067纺织产品1基本安全 部分项目0224国家纺织产品基本安全技术规范 GB 18401-2003只测：甲醛含量、pH值、可分解芳香胺染料8家具用纺织品1部分项目0224布艺类产品 第3部分：家具用纺织品 FZ/T 62011.3-2008只测：断裂强力、撕破强力、水洗尺寸变化率、干洗尺寸变化率、耐洗色牢度、耐干洗色牢度、pH值、甲醛含量、禁用偶氮染料9人造板及其制品1甲醛释放量0309室内装饰装修材料 人造板及其制品中甲醛释放限量GB 18580-200110中密度纤维板1甲醛释放量0309.02中密度纤维板GB/T 11718-2009只用穿孔萃取法和气候箱法11人造革1拉伸负荷及断裂伸长率0222.02塑料 拉伸性能的测定 第3部分：薄膜和薄片的试验条件 GB/T1040.3-20062剥离负荷0222.02软质复合塑料材料剥离试验方法 GB 8808-198812聚氯乙烯人造革1部分项目0222聚氯乙烯人造革 GB/T8948-2008只测：拉伸负荷、断裂伸长率、撕裂负荷、剥离负荷13聚氨酯干法人造革1部分项目0222聚氨酯干法人造革 GB/T 8949-2008只测：拉伸负荷、断裂伸长率、撕裂负荷、剥离负荷No. CNAS L5016 第 12 页 共 12 页 The scope of the accreditation in Chinese remains the definitive version. CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS L5016) NAME: The Test Center of Foshan Shunde Furniture Research and Development Institute Co., Ltd.ADDRESS：No.01-26, Area C1, Asia International Furniture Material Trading Center, Longjiang Section of No.325 National Highway, Shunde, Foshan, Guangdong, ChinaDate of Issue:2011-03-24 Date of Expiry: 2014-03-23Date of Update：2011-03-24APPENDIX 1 SCOPE OF ACCREDITED TESTINGTest ObjectItem/ParameterCode of FieldTitle, Code of Standard or MethodLimitationNoteItem/ Parameter1Leather1Tensile strength and Elongation0222.02Leather, physical and Mechanical Test, Tensile strength and Elongation Test QB/T 2710-20052Tear Load0222.02Leather, Physical and Mechanical Test, Determination of Tear Load: Double Edge Tear QB/T 2711-20053Coating Adhesion0222.02Leather, determination of Coating Adhesion GB/T 4689.20-19964pH Test0222.01Leather, Chemical Test, Determination of pH QB/T 2724-20051Leather5Formaldehyde0222.01Leather and Fur, Chemical Test, Determination of Formaldehyde Content GB/T 19941-2005Accredited only for the Spectroscopy method6Banned Azo Colourant0222.01Leather and Fur, Chemical Test, Determination of Banned Azo Colourants GB/T 19942-20057Pentachlorophenal content0222.01Leather and Fur, Chemical Test, Determination of Pentachlorophenol Content GB/T22808-20082Furniture Leather1Part Items0222Furniture leather GB/T 16799-2008Accredited only for Tensile strength and Elongation, Tear Load, Coating Adhesion, pH, Formaldehyde, Banned Azo Colourant and Pentachlorophenal content3Flexible cellular polymeric materials1Apparent Density0221.05Cellular Plastic and Rubber, Determination of Apparent Density GB/T 6343-20092Determination of Compression Set0315.11Flexible Cellular Polymeric Materials, Determination of Compression Set GB/T 6669-2008Accredited only for method A and C3Tensile Strength and Elongation at Break0315.02Flexible Cellular Polymeric Materials, Determination of Tensile Strength and Elongation at Break GB/T 6344-20084Hardness0315.06Flexible Cellular Polymeric Materials, Determination of Hardness (Indentation Technique) GB/T 10807-2006Accredited only for method B3Flexible cellular polymeric materials5Tear Strength0315.03Flexible Cellular Polymeric Materials, Determination of Tear Strength GB/T 10808-20064High Rebounding Polyurethane Cellular Plastics1Part Items0221High Rebounding Polyurethane Cellular Plastics QB/T 2080-2010Accredited only for Density,Indentitation Hardness(25%),Proportion of indentation,Tensile strength and Elongation at break,tear strength ,75%Compression set5General Flexible Polyurethane Cellular Plastics1Part Items0221General Flexible Polyurethane Cellular Plastics GB/T 10802-2006Accredited only for Compression set, Tensile strength, Elongation at Break, Hardness ( Indentation Technique), and Tear Strength6Textile1Determination of Breaking Force0312.02Textile, Tensile Properties of Fabrics, Part 1: Determination of Breaking Force and Elongation at Breading Force Strip Method GB/T 3923.1-19972Determination of Tear Force0312.03Textile, Tear Properties of Fabrics, Part 2: Determination of Tear Force of Trouser Shaped Specimens (Single Tear Method) GB/T 3917.2-20093Determination of Dimensional Change in Washing0224.09Textile, Determination of Dimensional Change in Washing and Dry Cleaning GB/T 8630-20026Textile4Dimensional Change to Dry Cleaning0224.09Dry Wash Resistance Test Method for Garments Used adhesive interlining FZ/T 80007.3-20065Colour Fastness to Washing0224.07Textiles, Tests for Colour Fastness, Colour Fastness to Washing with Soap or Soap and Soda GB/T 2931-20086Colour Fastness to Dry Cleaning0224.07Textile, Colour Fastness Test, Colour Fastness to Dry Cleaning GB/T 5711-19977pH Test0224.03Textile, Determination of pH of the aqueous extract GB/T 7573-20098Free and hydrolysed Formaldehyde0224.03Textile, Determination of Formaldehyde, Pari1: Free and hydrolysed Formaldehyde (Water Extraction Method) GB/T 2912.1-20099Banned Azo Colourants0224.03Textile, Determination of the Banned Azo Colourants GB/T 17592-20067Textile Products1General safety Part Items0224National General Safety Technical Code for Textile Products GB 18401-2003Accredited only for Formaldehyde,pH and the Banned Azo Colourants8Slipcover1Part Items0224Indoor Ornamental Textile - Part 3: Slipcover FZ/T 62011.3-2008Arredited only for Breaking Force, Tear Force, Dimensional Change to Washing, Dimensional Change to Dry Cleaning, Colour Fastness to Washing, Colour Fastness to Dry Cleaning, pH, Formaldehyde and Banned Azo Colourant9Wood Based Panels and Finishing Products1Determination Of Formaldehyde Emission0309Indoor Decorating and Refurbishing Materials - Limit of Formaldehyde Emission of Wood Based Panels and Finishing ProductsGB 18580-200110Medium Density Fibreboard1Determination Of Formaldehyde Emission0309.02Medium Density Fibreboard GB/T 11718-2009Accredited only for Perforator Method and Climate Chamber Method11Artificial Leather1Tensile strength and Elongation0222.02Plastic - Determination of Tensile Properties - Part 3: Test Conditions for Films and Sheets GB/T1040.3-20062Peel Load0222.02Test Method For Peel Force Of Flexible Laminated Plastics GB 8808-198812Polyvinyl Chloride Artificial Leather1Part Items0222Polyvinyl Chloride Artificial Leather GB/T8948-2008Accredited only for Tensile Load, Elongation at break, Tear Load, and Peel Load13Polyurethane Dry-processing Artificial Leather1Part Items0222Polyurethane Dry-Processing Artificial Leather GB/T 8949-2008Accredited only for Tensile Load, Elongation at break, Tear Load, and Peel Load中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS L5016）名称: 佛山市顺德家具研究开发院有限公司检测中心地址：广东省佛山市325国道顺德龙江路段亚洲国际家具材料交易中心C1排01-26号签发日期：2011年03月24