ESX4.0InstallationEN安装介绍有截图.doc

ESX 4.0 InstallationStep 1: Point your browser to your iLo IP 172.17.14.21 and use tseadmin and vmware123 for authentication. Then open a Java remote console session to your ESX 3.5 hostStep 2: Reboot your server and go into the BIOS by hitting F9 when promptedStep 3: Select Boot Controller OrderStep 4: Move HP Smart Array E200i Controller in the list to the top. We do this to ensure that this fresh installation will boot from the local disk as opposed to a SAN LUN we were using previously. Hit twice then press F10Step 5: While the server is posting, ask your instructor to mount the ESX 4.0 ISO imageStep 6: The ESX 4.0 Boot Menu appears, Press Enter to install ESX 4.0Step 7: The ESX Installer starts by Loading ESX .Step 8: The ESX installer continues to bootStep 9: At the Welcome to the ESX Installer click NextStep 9: Click I accept the terms of the license agreement and click NextStep 10: Select your Keyboard Layout and click NextStep 11: Select No to Do you want to install custom drivers? and click Next to ContinueStep 12: Click Yes to Load the system driversStep 13: System Drivers are loaded Step 14: When the Loading Drivers step has completed, click Next to continueStep 15: Select Enter a serial number later and click Next to continueStep 16: Select the First Non-Integrated Network adapter- Select “This adapter requires a VLAN ID” and enter the VLAN ID value 263- Click Next to continueStep 17: Select Use the following network settings and enter the following:IP Address 172.17.13.51Subnet Mask 255.255.255.0Gateway 172.17.13.1Primary DNS 192.168.2.30Secondary DNS 192.168.102.30Hostname sc-descartes01Click Next to continueStep 18: Select Standard Setup and click Next to continueStep 19: Select the Local Storage device to Install ESX and click Next to continueStep 20: Click OK on the Data Loss Warning dialogue box to erase the datastoreStep 21: Select the appropriate Time Zone Settings and click Next to continueStep 22: Set the Date and time and click Next to continueStep 23: Set the root password - Click Add type user Student and password vmware- Click Next to continueStep 24: Review the Summary of Installation Settings to ensure the installation parameters are correct and click Next to continueStep 25: The ESX 4.0 installation beginsStep 26: The ESX Packages are installedStep 27: When the installation status reaches f%, click NextStep 28: Click Finish on the ESX 4.0 In