ST PC SM DX fiber optic patch cord.doc

ST PC SM DX fiber optic patch cordNotices1. Dont bend and circle the fiber optic patch cord excessively; this will increase the attenuation of light transmission.2. The optical module transceiver wavelength of both ends of fiber optic patch cord must be consistent, which means it should be the same wavelength of optical module at the two ends of it.3. Must use the protective cover to protect the connectors, to avoid that dust and oil would damage the optical fiber coupling.SpecificationType STPCUPCAPCInsertion loss0.2dBReturn loss50dBExchangeability0.2dBRepeatability0.2dBVibration test0.10dB(10-60Hz,1.5mm amplitude)Drop test0.10dB（Height:1.5m，8 times）Tensile strength0.10dB（68.6N，10 min）Mechanical Durability500 times）High-Temperature test0.20dB（+85，Last 168 hours ）Low-Temperature test0.20dB（-40，last 168 hours）Temperature cycling test0.20dB（-40+75，95%R.H，21 periods，168 hours）humidity test0.20dB（+25+65，relative humidity 95%，168 hours laterEnface sizeradius of curvature：10-25(PC/UPC SM) apex offset：0-50um Fiber sag：-100 to +100nmPicturesFeatures:1. Low insertion loss2. High return loss3. Good repeatability4. Good exchangeability5. Excellent environmental adaptabilityApplicationsTelecommunication, FTTX+LAN, FTTH, Video Transmission, OpticalFiber Sensor, Testing equipment, CATVThe technological process of making fiber optic patch cordOrderin