工程管理国际论坛Engineering ManagementInternational Forum_.pdf

Page 1 of 4 工程管理国际论坛工程管理国际论坛 Engineering Management International Forum April 23 2005 Beijing China Hosts Chinese Association of Int l Exchange Personnel CAIEP Tsinghua University School of Continuing Ed SCE American Society of Mechanic Engineers ASME 哈里 阿曼 博士 Harry Armen Sc D 哈里 阿曼先生是美国机械工程师学会 2004 至 2005年度的会长 1992年至 1997年 期间 他在美国机械工程师学会的公共事务部董事会负责政府关系 并于 1994年至 1997 年出任该董事会副主席 他于 1997年至 2000年担任公共事务部副部长 2003 年至 2004 年任董事 目前 阿曼先生是美国一家大型国防业承包商 Northrop Grumman公司 总部在洛杉矶 的主管系统整合领域中空中预警和电子战系统的首席 技术官 他负责支持公司的研发计划目标 阿曼先生持纽约州职业工程师证书 并获 得美国航天航空局 NASA授予认可奖证书和纽约大学授予的创始人纪念奖 除了在 美国机械工程师学会的工作经验外 他还在国家科学基金会的工程总监顾问委员会和 国际技术教育协会的顾问董事会担任过委员和主席 Harry Armen is the president of ASME for 2004 2005 He also has a strong record of service in the ASME Council on Public Affairs where he served on the Board on Government Relations from 1992 to 1997 and was vice president of that board from 1994 to 1997 He also served as senior vice president of the Council on Public Affairs from 1997 to 2000 and as a governor from 2000 to 2003 Currently Armen is the chief technologist in the Airborne Early Warning and Electronic Warfare Systems business area of the Integrated Systems Sector at Northrop Grumman Corp a large U S defense contractor headquartered in Los Angeles Calif He is responsible for the planning of research and development programs supporting strategic corporate goals A recipient of the Certificate of Recognition Award from NASA and the Founder s Day Award from New York University Armen is a licensed professional engineer in New York State In addition to his ASME experience he has served as member and chair of the Advisory Committee of the Engineering Directorate at the National Science Foundation and the Advisory Board of the International Technology Education Association 发言人介绍发言人介绍 Introduction of Speakers Page 2 of 4 陈楚荣 博士 Chor Weng Tan Ph D P E 陈楚荣博士是美国机械工程师学会 ASME 的高级教育顾问 他亲自发起工程管理认 证项目 成为认可工程管理资格的一个国际统一的考核项目 并将其主持创立的国际 工程管理 EMCI 作为商务模式推向市场 1991年至 2004年 陈先生作为美国 ASME 教育部总监 负责领导这个拥有 12 万会员的学会的教育项目 包括大学工程 教育 大学入学前科技 工程和数学教育 在职工程师和专职技术人员的职业发展和 继续教育 陈先生曾是美国科学基金会的项目主任 并曾于 2000年担任纽约市科技 委员会成员以及亚美顾问委员会成员 陈先生是美国印第安那州 Evansville 大学机械 工程学士 伊利诺伊大学机械工程硕士和博士 Chor Weng Tan is an Education Consultant for ASME International developing the Engineering Management Certification program which validates the competence in engineering management and is based on a uniform globally administered examination and creating the Engineering Management Certification International EMCI as a business model to market the program Between 1991 and 2004 Chor Tan was the Managing Director of Education at ASME responsible for directing the 120 000 member Society s educational programs including formal engineering education pre college science technology engineering and math education professional development and continuing education of prospective and practicing engineers and other technical professionals He was Program Director for the National Science Foundation in Washington DC He was a member of New York City Commission on the Year 2000 NYC Commission on Science Technology and NYC Chancellor s Asian American Advisory Council Chor Tan received a B S degree in Mechanical Engineering from the University of Evansville in Evansville IN and M S and Ph D degrees in Mechanical Engineering from the University of Illinois in Urbana IL 罗纳德 萨波瑞达 先生 Ronald Saporita P E 罗纳德 萨波瑞达先生在计划 工程 建筑和工业营运以及所需后援和基础设施方 面 具有 35 年以上丰富的国际经验 其中包括多种产品生产 石油化工工厂的运行 和管理 企业资产 工艺和生产改进项目的管理和监督 目前 他担任位于纽约 Glen Head的 Wilson Management Associates Inc WMA 之副总裁 负责帮助客户分析 与规避各种风险 以及解决项目的设计与建造过程中的耗资与调度争端 萨波瑞达先 生于 Cooper Union获得工程学士和工程硕士学位 是美国机械工程师学会之特别会 员 并拥有五州之专业工程师执照 萨波瑞达先生是美国机械工程师学会专业发展部 董事会成员 安全与风险分析部前主席 美国机械工程师学会专业实践课程创始之前 团队领袖和贡献卓著者 并于 年被授予美国机械工程学会杰出贡献奖 Mr Saporita has over thirty five years of worldwide experience in planning engineering construction and operation of industrial facilities as well as the support and infrastructure required His experience includes commercializing various products and processes management of commissioning of chemical and petrochemical facilities and project management and corporate oversight of capital process and manufacturing improvement projects Currently he is Vice President of Wilson Management Associates Inc WMA in Glen Head New York responsible for assisting clients in the analysis and reduction of various types of risks as well as resolution of disputes for design and construction projects Typical disputes involve cost and or schedule overruns He has a B E and M E in Mechanical Engineering from The Cooper Union is a Fellow of the American Society of Mechanical Engineers and is a licensed Professional Engineer in five states Mr Saporita is a Member of ASME s Board of Professional Development past Chairman of the Safety and Risk Analysis Division former team leader and contributor to ASME s Professional Practices Curriculum Initiative and a founding member of the Engineering Management Certification International Initiative He was the recipient of ASME s Dedicated Service Award in 2002 Page 3 of 4 威廉 卡森斯 博士 William T Cousins Ph D 卡森斯博士持有弗吉尼亚工学院和州立大学的机械工程学士学位 机械工程硕士学位 和博士学位 并在压缩机空气动力学与操作领域工作了 25年多 有六年的大学执教 经验 他有电力业和空气污染治理业的工作经验 目前他在康乃迪克州的普惠公司 Pratt Whitney 担任业绩系统分析操作与测试验证的资深科目导师 负责开发技术 科目 卡森斯博士除了在许多领域有工作经验外 他还花了大量时间从事引擎入流与 不稳定流量分析 他以压缩系统动力学 入流变形 以及失速和起伏现象的分析和测 试工作著称 他获得过多种奖励 包括弗吉尼亚工学院教师优秀奖 美国航天局 Glenn团队认可奖 以及美国机械工程学会奉献服务奖 2000年 他获得 Honeywell 技术成就奖 卡森斯博士是美国机械工程学会的高级成员 曾担任第七区的副会长 职业发展副会长 会员事务的高级副会长 目前 他是董事会成员 Dr Cousins holds a BSME MSME and Ph D degree from Virginia Polytechnic Institute and State University and has worked in the area of compressor aerodynamics and operability for over 25 years with over 6 years teaching experience in the University He has worked in both the power production and in the air pollution control industries He is currently with Pratt Whitney in East Hartford Connecticut where he holds the position of Senior Fellow Discipline Lead for Performance Systems Analysis Operability and Test Validation Responsibilities include development of the technical discipline While Dr Cousins works in many areas he spends a large portion of his time in the area of inlet engine integration and unsteady flow analysis He is known for his test and analytical work in the area of compression system dynamics inlet distortion and the stall and surge phenomena He has received numerous awards including the Certificate of Teaching Excellence from VA Tech the NASA Glenn Team Recognition Award and the ASME Dedicated Service Award In 2000 he received the Honeywell Technical Achievement Award Dr Cousins is a Fellow in ASME and has been the Vice President in charge of Region XII the Vice President for Professional Development and the Senior Vice President for Member Affairs Presently he sits on the Board of Governors 苏尼尔 古泊塔 先生 Sunil B Gupta 苏尼尔 古泊塔先生出生成长在纽约 他在高等教育 劳工发展 市场 项目开发 继续教育和企业重组方面拥有逾十年经验 作为纽约工业大学继续教育和职业协助部 的执行总监 他开发了新的课程 创建了和各种协会与工业界的合作伙伴关系并推动 了劳工发展 以及继续教育研讨培训的进程 目前他正在哥伦比亚大学进行教育专业 的博士深造 苏尼尔 古泊塔先生已获得 St John s University 之市场科学学士学位 以及纽约工业大学商业技术管理硕士学位 他是 ASME 考试委员会成员 纽约布鲁 克林区劳工发展与培训特别委员会主席 并且加盟了 ASME 纽约布鲁克林商业议 事厅 直接市场联合会 纽约联合执行官学会 国家学院与企业联合会 国家学生就 业管理联合会 人力资源管理学会 以及美国军事工程学会 Sunil B Gupta was born and raised in New York He has over ten years of experience in higher education workforce development marketing program development continuing education and corporate sales As Executive Director of Continuing Education and Career Services at Polytechnic University he develops new course curriculum and creates partnerships with associations and industry to promote workforce development and continuing education seminar training He is currently pursuing a Doctorate in Education at Columbia University He has a Masters of Science from Polytechnic University in Business Technology Management and received his Bachelors of Science in Marketing from St John s University He is a member affiliated with ASME Engineering Management Certification International Examination Committee Member Brooklyn Borough President s Workforce Development and Training Taskforce Brooklyn Chamber of Commerce Direct Marketing Association New York Society of Association Executives National Association of Colleges and Employers National Association of Student Employment Administrators Society of Human Resource Management and The Society of American Military Engineers Page 4 of 4 乔治 辛考尔 先生 George Shinkle 乔治 辛考尔先生是一个职业工程师 具有美国普度大学机械工程学士学位和 Ball State 大学 MBA学位 他具有 25 年的各种工程 工程管理和管理顾问的经验 他是 Direction Associates公司的创始人之一 这是一家顾问公司 向北美 欧洲 亚洲和 非洲等国际公司提供商务 管理 技术 市场和制造等方面的服务 他为通用汽车公 司工作 17 年 并因技术发明和三项专利而获得具有声望的 Boss Kettering 奖 他是最 近一本题为 将战略转化为成功 如何实施精简的管理系统 著作的作者之一 该书 论述如何将 丰田生产系统 的精简概念落实到管理系统中去 他曾经管理产品与生 产发展部门 产品设计 分析和试验公司 汽车系统发展部门 客户计划部门 技术 发展部门 国际工程部门 以及管理过实施一项六亿美元全球项目的商务部门 Mr Shinkle holds a BSME from Purdue University an MBA from Ball State University and is a Licensed Professional Engineer He has over 25 years of varied engineering engineering management and management consulting experience He is one of the founders of Direction Associates Inc a consulting firm providing services in the business management technical marketing and manufacturing areas to global organizations in North America Europe Asia and Africa He spent over 17 years at General Motors where he was awarded the Prestigious Boss Kettering Award for technical innovation in addition to three patents He is a co author of a recently released book on implementing lean concepts the Toyota Production System into management systems Transforming Strategy into Success How to Implement a Lean Management System He has managed Product and Manufacturing Development Teams Product Design Analysis Testing Organizations Automotive Systems Development Teams Customer Program Teams Technology Development Teams International Engineering Teams and managed a Business Team running a 600 million global business 陈向力 博士 Xiangli Chen Ph D 陈向力博士现任 GE 医疗系统集团全球产品研发 中国区 总经理 工作地在北京 他带领 着一支研发队伍致力于研究与开发适应全球市场需求的医疗器械和医疗服务 尤其是医疗 诊断成像技术 如 CT 扫描系统 X 光成像系统 磁共振成像系统等 同时 他也为公司 更为广泛的业务运作提供综合性领导 2000 年至 2003 年 陈博士领导创立了 GE 总公司 在上海的全球研发中心 并担任首位总经理 从制定战略计划 建立全新组织架构 组织 运营流程 到确保项目的设立和完成 他带领了整个中心的成立和成长 作为 GE 研发机 构的一个重要部分 上海的 GE 全球研发中心以其创新和主导性的技术优势奠定了其全球 技术的领导地位 1994 年至 2000 年 陈博士在 GE 位于美国总部的全球研发中心担任研 发和管理的职位 在激光的工业应用领域 他是一位世界知名