机械竣工.doc

1.01.1STAGES OF COMPLETIONMechanical CompletionMechanical Completion shall have been achieved when all construction activities,installation work, static (non-functional) testing have been completed anddocumented in accordance with the Contract Documents. At this point, the turnoversystem or the Facility, as applicable, will be ready to start Precommissioningactivities. Mechanical Completion shall include completion of the followingactivities:1.1.1Civil WorkAll excavation, backfill and compaction work is complete.All underground sewers and pressure pipe have been installed and tested.All finish grading and paving is complete, and the Site has been checked for properdrainage.1.1.2Concrete WorkAll concrete foundations and structures are complete.All grouting of Equipment and supports is complete.All fireproofing (structural steel, Equipment supports and skirts, cable tray and otherrequired items) is complete.1.1.3Structural Steel WorkAll structural steel, ladders, platforms, stairways and walkways are erected.All bolted connections are tightened.All welded connections and required non-destructive examinations are complete.1.1.4Building WorkAll buildings are constructed.All building architectural finishes and schedules are complete.All building mechanical, electrical, control systems and protection systems installationshave been checked and statically tested.1.1.5Mechanical WorkAll mechanical Equipment requiring hydrostatic testing has been tested at themanufacturers shop or at the Site, as required.All Factory Acceptance Testing (FAT) of machinery and Equipment, as required, iscomplete.All vessel internals (with the exception of chemicals and catalysts) have been installed,checked and tested where required, and vessel interiors have been cleaned and checkedfor removal of all debris. With the exception of vessels requiring installation ofchemicals and catalysts, final closure of vessels is complete.All final cold alignment checks between rotating machinery and their drivers arecomplete and documented.All tanks have been constructed, hydrostatically tested, drained, cleaned and final closureis complete.All fired heaters and boilers have been erected, including installation of all internalrefractory and insulation.1.1.6Piping WorkAll piping systems have been installed and checked.All fire control and fire protection hardware has been installed.All piping connections to rotating machinery have been checked for proper alignment andclearance.All non-destructive examinations and static pressure testing is complete.1.1.7Electrical WorkAll electrical Equipment, junction boxes, panels and fixtures have been installed and allstatic checks and tests are complete.All grounding, cable and wire installations are complete and have been checked.All required insulation resistance tests are complete.All dielectric testing of medium voltage (6kV) and high voltage (35kV)cable is complete.All cable and wire terminations have been checked.All panel schedules are complete, current and properly labeled.1.1.8Control Systems WorkAll instrument bench calibrations are complete.All Factory Acceptance Testing (FAT) and installation of the DCS is complete.All control panels, marshalling cabinets, junction boxes and instruments have beeninstalled and all static checks and tests are complete.All cable and wire installations are complete and have been checked.All cable and wire terminations have been checked.All process leads and tubing have been installed and pressure tested.All panel schedules are complete, current and properly labeled.All fire protection, and fire and gas detection controls and instruments have been installedand checked.1.1.9Paint and Insulation WorkAll painting and insulation is complete to the greatest extent possible.1.1.10DocumentationAll system turnover packages have been assembled, their contents checked forcompleteness and accuracy, and the packages have been reviewed and confirmed by theProject Company to be complete.All Specifications and Drawings requiring as-built updates have been updated. One copyof manual updates (red lines) has been transmitted to the Project Company.1.1.11Operator TrainingContractors formal classroom training program for Project Companys operatingpersonnel for the Facility is complete.1.1.12Spare PartsAll Spare Parts and special tools required for commissioning and startup have been turnedover to the Project Company.All Spare Parts have been delivered to the Site.1.1.13Site Clean