纺织防螨剂,床垫防螨剂,床品防螨剂,布料防螨剂,纺织品防螨剂,织物防螨剂,面料防螨剂,家纺防螨剂.doc

Anti-mite finishing agent MITEFeatures and advantagesFeaturesAdvantagesWide application range, good effectHighly repellent efficient against mites in effectResistant to washing Forms medical membrane on the surface of the fabric After washing many times, the effect is still excellentSafe to bodyNon-toxic and non-stimulationNo influence on the quality of fabricNo influence on whiteness, handling, shade , touch, and has no strength reduction 使用方法 防螨虫整理剂MITE处理织物时可采用浸轧、浸渍、涂层和喷洒工艺。MITE的一般用量为24%(o.w.f)，防螨虫整理剂MITE不适宜采用170以上的高温工艺。 一、 浸轧法：1 工艺配方： 防螨虫整理剂MITE-1 1040g/L防螨虫整理剂MITE-2 1040g/L 非离子或阴离子柔软剂 适量 2 溶解、稀释：先加大部分的水，快速搅拌下加入防螨虫整理剂MITE-1，再加入MITE-2，然后加入非离子或阴离子有机硅柔软剂等，继续搅拌。制备配好的浴液应尽快使用。3 工艺流程：漂染印花织物 浸轧整理液（轧液率为60100%） 烘干（80100） 拉幅（13014030s，或1202min）二、浸渍法： 1 工艺配方 、溶解、稀释同一 2 工艺流程：漂染印花织物 浸渍整理液 脱水（甩出溶液重复使用） 烘干（70100） 拉幅（14030s，或1202min）Applied noteAnti-mite finishing agent MITE is suitable for padding, dipping, coating, spraying. the agent isnt suitable for the high temperature above 170. Technical recipe： Anti-mite finishing agent MITE-1 10-40g/lAnti-mite finishing agent MITE-2 10-40g/lNon-ion or negative ion softener right amountMixing operation:Add most water, stir, then add MITE-1 then add MITE-2, and add non-ion or negative ion softener, continue to stir. Please use it quickly.Padding process:Fabric padding the agent (expressing: 60-100%) Drying(80-100) Curing(130-140 30s, or 1202min)Dipping process:Fabric Dipping the agent (bath ratio1:10, 5-10) Separating water Drying(70-100) Curing(14030s,or 1202min)Herst quality certificate: You can receive the Herst quality certificate, if you agree on a simple contact and the products fit Herst standard. Please get the Herst quality certificate contract documentary. Packaging and storage:：25kg 、120kg plastic barrel, keep cool warehouse at temperature above 0C, and storage life for a year. In low