钢筋混凝土梁的弹塑性分析ansys命令流.doc

!(1)工作环境设置/FILENAME,RC-BEAM !指定工作文件名/TITLE,ALALYSIS OF A RC-BEAM !指定图形标题!(2)进行前处理器/prep7!(3)定义单元类型ET,1,LINK8 !定义钢筋单元ET,2,SOLID65 !定义混凝土单元ET,3,MESH200 !用于拉伸成体单元KEYOPT,3,1,6!(4)定义钢筋截面积r,1,28.3r,2,50.3r,3,314.1!(5)为solid65单元定义一个实参数组r,4,!(6)定义混凝土材料MP,EX,2,2.55E10MP,PRXY,2,0.3TB,CONC,2,1,9, !定义混凝土的破坏参数TBDATA,0.3,0.55,1.55E6,-1,TBDATA,0.6!(7)定义钢筋材料模型及参数mp,ex,2,2e5 !纵向受拉钢筋材料mp,prxy,2,0.3tb,bkin,2,1,2,1tbdata,350mp,ex,3,2e5 !横向箍筋，架立钢筋材料mp,prxy,3,0.25tb,bkin,3,1,2,1tbdata,200!(8) 创建以及复制节点/pnum,node,1/pnum,elem,1n,1n,9,200fill,1,9ngen,11,9,1,9,1,30ngen,11,99,1,99,1,-150/view,1,1,1,1!(9)建立箍筋单元type,1real,1mat,3!水平箍筋*do,i,11,16,1e,i,i+1e,i+(83-11),i+(83-11)+1*enddo!坚直箍筋*do,i,11,74,9e,i,i+9e,i+6,i+6+9*enddo!产生整个模型的箍筋egen,11,99,all!(10)建立架立筋以及纵筋单元!创建上部的架立钢筋单元*do,i,83,node(25,270,-1500+150),99e,i,i+99e,i+6,i+6+99*enddo!纵向受拉钢筋单元的属性type,1real,3mat,2!创建纵筋单元*do,i,11,node(25,30,-1500+150),99e,i,i+99e,i+3,i+3+99e,i+6,i+6+99*enddo/view,1,1,1,1/pnum,elem,0/pnum,node,0/eshape,1eplot!(11)建立混凝土剖面并划分网格k,1K,2,200,k,3,200,300k,4,300a,1,2,3,4lsel,s,loc,y,0lsel,a,loc,y,300lesize,all,8lsel,alllsel,s,loc,x,0lsel,a,loc,x,200lesize,all,10type,3amesh,all!(12)拉伸形成混凝土单元type,2real,3mat,1extopt,esize,20extopt,aclear,1vext,all,-1500/pnum,mat,1/pnum,node,0/pnum,elem,0eplotallsel!(13)合并压缩节点编号nummrg,allnumcmp,alleplot!(14)施加支座约束nsel,s,loc,y,0nsel,r,loc,z,-1500+75d,all,uyd,all,ux!(15)施加对称面约束asel,s,loc,z,0da,all,symm!(16)施加载荷nsel,allnsel,s,loc,y,300nsel,r,loc,z,-450d,all,uy,-30allsel!(17)退出前处理器fini!(18) 进入求解器/solu!(19)求解器选项设置nlgeom,onnsubst,200outres,all,allneqit,50pred,oncnvtol,f,0.05,2,0.5allsel!(20)求解并退出求解器 solvefini!(21)进入通用处理器并读入最后一个子步的结