VLC命令行模式使用大全.doc

VLC命令行模式使用大全一 Receive and save a stream1.1 Receive a stream with VLC1.1.1 Receive an unicast stream(接收单播流)vlc -vvv udp:/8注释：8为目标计算机的IP地址1.1.2 Receive a multicast streamvlc -vvv udp:/:12341.1.3 Receive an HTTP/FTP/MMS streamvlc -vvv http:/example/stream.xyzvlc -vvv ftp:/example/stream.xyzvlc -vvv rtsp://tonbeme.mov1.2 Save a stream with VLCvlc stream -sout file/muxer:stream.xyz注释：stream：指网络流；muxer：指ps,ts,avi,ogg等封装形式；stream.xyz：存储文件的名字，前面需要加存储路径如：vlc udp:/:1234 sout file/ps:/home/youxr/movie.mpg二 Stream a file这里主要介绍视频文件如何以流的形式发出，给出下面的命令。2.1 单播输出vlc -vvv video1.xyz -sout udp:2 -ttl 122.2 多播输出vlc -vvv video1.xyz -sout udp:/:1234 -ttl 122.3 Http输出vlc -vvv video1.xyz -sout http/muxer:本机地址:端口号 -ttl 12注释：muxer为ps、ts等封装形式。客户端接收为：vlc http:/服务器地址：端口号三 高级应用3.1 Transcoding(转码) Transcode the input stream and send it to a multicast IP address with the associated SAP announce:vlc -vvv input_stream -sout #transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace:standardaccess=udp,mux=ts,url=2,sap,name=TestStream注释：SAP可不要 Display the input stream, transcode it and send it to a multicast IP address with the associated SAP announce:vlc -vvv input_stream -sout #duplicatedst=display,dst=transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace:standardaccess=udp,mux=ts,url=2,sap,name=TestStream Transcode the input stream, display the transcoded stream and send it to a multicast IP address with the associated SAP announce:vlc -vvv input_stream -sout #transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace:duplicatedst=display,dst=standardaccess=udp,mux=ts,url=2,sap,name=TestStream3.2 Multiple streaming(多个流输出) Send a stream to a multicast IP address and a unicast IP address:vlc -vvv input_stream -sout #duplicatedst=standardaccess=udp,mux=ts,url=2,sap,name=TestStream,dst=standardaccess=udp,mux=ts,url= Display the stream and send it to two unicast IP addresses:vlc -vvv input_stream -sout #duplicatedst=display,dst=standardaccess=udp,mux=ts,url=2,dst=standardaccess=udp,mux=ts,url=2 Send parts of a multiple program input stream:vlc -vvv multiple_program_input_stream -sout #duplicatedst=standardaccess=udp,mux=ts,url=2,select=program=12345,dst=standardaccess=udp,mux=ts,url=3, select=video,program=1234-23453.3 Transcoding and multiple streaming(转码且多流输出) Transcode the input stream, display the transcoded stream and send it to a multicast IP address with the associated SAP announce and an unicast IP address:vlc -vvv input_stream -sout #transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace:duplicatedst=display,dst=standardaccess=udp,mux=ts,url=2,sap,name=TestStream,dst=standardaccess=udp,mux=ts,url= Display the input stream, transcode it and send it to two unicast IP addresses:vlc -vvv input_stream -sout #duplicatedst=display,dst=transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128:duplicatedst=standardaccess=udp,mux=ts,url=,dst=standardaccess=udp,mux=ts,url=2 Send the input stream to a multicast IP address and the transcoded stream to another multicast IP address with the associated SAP announces:vlc -vvv input_stream -sout #duplicatedst=standardaccess=udp,mux=ts,url=,sap,name=OriginalStream,dst=transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128:standardaccess=udp,mux=ts,url=,sap,name=TranscodedStream 转码且存储vlc -vvv input_stream -sout #transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace:duplicatedst=display,dst=standardaccess=file,mux=ps,url=./movie.mpg3.4 HTTP streaming streaming in http (和2.3类似)服务器端运行：vlc -vvv input_stream -sout #standardaccess=http,mux=ogg,url=:8080客户端运行：-sout #standardaccess=http,mux=ogg,url=01:8080vlc :8080C:Program FilesVideoLANVLCvlc -vvv H:VIDEOgg.mpg :sout=#standardaccess=http,mux=ogg,dst=02:9898 转码并且http方式输出vlc -vvv input_stream -sout #transcodevcodec=mp4v,acodec=mpga,vb=800,ab=128:standardaccess=http,mux=ogg,url=:8080例如：if you want to stream an audio CD in Ogg/Vorbis over HTTP:vlc -vvv cdda:/dev/cdrom -sout #transcodeacodec=vorb,ab=128:standardaccess=http,mux=ogg,url=:80803.5 RTP streamingStream in RTP: on the server, run: vlc -vvv input_stream -sout #rtpdst=2,port=1234,sdp=:8080/test.sdpon the client(s), run: vlc :8080/test.sdp3.6 Use the es module Separate audio and video in two PS files: vlc -vvv input_stream -sout#esaccess=file,mux=ps,url_audio=audio-%c.%m,url_video=video-%c.%m Extract the audio track of the input stream to a TS file: vlc -vvv input_stream -sout #esaccess_audio=file,mux_audio=ts,url_audio=audio-%c.%m Stream in unicast the audio track on a port and the video track on another port: on the server side: vlc -vvv input_stream sout #esaccess=rtp,mux=ts,url_audio=:1212,url_video=:1213on the client side: