模糊控制算法C程序.doc

#include #includemath.h #define PMAX 100 #define PMIN -100 #define DMAX 100 #define DMIN -100 #define FMAX 100 /*语言值的满幅值*/ int PFF4=0,12,24,48;/*输入量D语言值特征点*/ int DFF4=0,16,32,64;/*输出量U语言值特征点*/ int UFF7=0,15,30,45,60,75,90;/*采用了调整因子的规则表,大误差时偏重误差,小误差时偏重误差变化*/ /*a0=0.3,a1=0.55,a2=0.74,a3=0.89 */ int rule77= /误差变化率 -3,-2,-1, 0, 1, 2, 3 / 误差 -6,-6,-6,-5,-5,-5,-4, / -3 -5,-4,-4,-3,-2,-2,-1, / -2 -4,-3,-2,-1, 0, 1, 2, / -1 -4,-3,-1, 0, 1, 3, 4, / 0 -2,-1, 0, 1, 2, 3, 4, / 1 1, 2, 2, 3, 4, 4, 5, / 2 4, 5, 5, 5, 6, 6, 6; / 3/*/int Fuzzy(int P,int D) /*模糊运算引擎*/ int U; /*偏差,偏差微分以及输出值的精确量*/ unsigned int PF2,DF2,UF4; /*偏差,偏差微分以及输出值的隶属度*/ int Pn,Dn,Un4; long temp1,temp2; /*隶属度的确定*/ /*根据PD的指定语言值获得有效隶属度*/ if(P-PFF3 & PPFF3) if(P=-PFF2) Pn=-2; PF0=FMAX*(float)(-PFF2-P)/(PFF3-PFF2); else if(P=-PFF1) Pn=-1; PF0=FMAX*(float)(-PFF1-P)/(PFF2-PFF1); else if(P=PFF0) Pn=0; PF0=FMAX*(float)(-PFF0-P)/(PFF1-PFF0); else if(P=PFF1) Pn=1; PF0=FMAX*(float)(PFF1-P)/(PFF1-PFF0); else if(P=PFF2) Pn=2; PF0=FMAX*(float)(PFF2-P)/(PFF2-PFF1); else if(P=PFF3) Pn=3; PF0=FMAX*(float)(PFF3-P)/(PFF3-PFF2); else if(P=PFF3) Pn=3; PF0=0; PF1=FMAX-PF0;if(D-DFF3 & DDFF3) if(D=-DFF2) Dn=-2;DF0=FMAX*(float)(-DFF2-D)/(DFF3-DFF2); else if(D=-DFF1) Dn=-1; DF0=FMAX*(float)(-DFF1-D)/(DFF2-DFF1); else if(D=DFF0) Dn=0; DF0=FMAX*(float)(-DFF0-D)/(DFF1-DFF0); else if(D=DFF1) Dn=1; DF0=FMAX*(float)(DFF1-D)/(DFF1-DFF0); else if(D=DFF2) Dn=2; DF0=FMAX*(float)(DFF2-D)/(DFF2-DFF1); else if(D=DFF3) Dn=3; DF0=FMAX*(float)(DFF3-D)/(DFF3-DFF2); else if(D=DFF3) Dn=3; DF0=0; DF1=FMAX-DF0;/*使用误差范围优化后的规则表rule77*/ /*输出值使用13个隶属函数,中心值由UFF7指定*/ /*一般都是四个规则有效*/ Un0=rulePn-1+3Dn-1+3; Un1=rulePn+3Dn-1+3; Un2=rulePn-1+3Dn+3; Un3=rulePn+3Dn+3; if(PF0=DF0) UF0=PF0;else UF0=DF0; if(PF1=DF0) UF1=PF1;else UF1=DF0; if(PF0=DF1) UF2=PF0; else UF2=DF1; if(PF1UF1) UF1=0; else UF0=0; if(Un0=Un2) if(UF0UF2) UF2=0; else UF0=0; if(Un0=Un3) if(UF0UF3) UF3=0; else UF0=0; if(Un1=Un2) if(UF1UF2) UF2=0; else UF1=0; if(Un1=Un3) if(UF1UF3) UF3=0; else UF1=0; if(Un2=Un3) if(UF2UF3) UF3=0; else UF2=0; /*重心法反模糊*/ /*Un原值为输出隶属函数标号，转换为隶属函数值*/ if(Un0=0) Un0=UFFUn0;else Un0=-UFF-Un0; if(Un1=0) Un1=UFFUn1;else Un1=-UFF-Un1; if(Un2=0) Un2=UFFUn2;else Un2=-UFF-Un2; if(Un3=0) Un3=UFFUn3;else Un3=-UFF-Un3; temp1=UF0*Un0+UF1*Un1+UF2*Un2+UF3*Un3; /因为选定隶属函数为三角形，且对称，故可以证明中心在中间的特征点上（横坐标）。temp2=UF0+UF1+UF2+UF3; U=temp1/temp2;return U; /最后的输出void main() int a=0,e,ec;/*int nowpoint,p1,p2=1;FILE *in,*out;in=fopen(in.txt,r);out=fopen(out.txt,w);*/while(!feof(in)while(1) /fscanf(in,%d,&nowpoint); /p1=nowpoint; /e=0-nowpoint; /ec= p1-p2; printf(请输入e:); scanf(%d,&e); printf(请输入ec:); scanf(%d,&e