化工机械英文翻译资料.doc

英文资料1.Box-type low-melting glass melting furnace closureBox-type low-melting glass melting furnace closures, mainly for the electronics industry, the low-melting glass melting closure. Mold can also be used for various mechanical parts tempering; Alloy Die Casting-melting aging; PM powder drying temperature. Microcomputer automatic temperature controls procedures used to achieve drying process automation curve.2.Box organic membrane Pui Pui burning furnace.Box-pui organic membrane Roaster, mainly for the electronics industry, the low-melting glass melting closure. 3.Swing Austempered Xiaoyan furnaceSwing by the workpiece Austempered durable manufacturing of energy-efficient industrial-type furnace. Workpiece heating molten liquid medium, such as Xiaoyan category, bases, oils, and low melting point metal and alloy, Xiaoyan workpiece heating furnace, heating faster, lighter oxidation decarbonization, facilitate local quenching, and a variety of Austempered Chemical heat treatment. Particularly applicable to railway locomotives, ball mill liners, Ball, crusher hammer Austria - PayPal of abrasion-resistant material, such as temperature quenching.Swing Austempered Xiaoyan from the furnace stove, stainless steel Crucibles, electric reciprocating swing rack, stainless steel cold-speed, electric components and automatic temperature control cabinet composed of different solvents can be used for spare parts quenching and tempering heated, Austempered cooling, such as liquid chemical heat treatment process from furnace steel and steel welded together, the use of furnace- = 14 mm plate made Xiaoyan lining ultra-light high-intensity 0.6 g/cm3 beads firebrick, dissecting Purchase silicate fibers, and the furnace lining shell filled with insulation between the expansion powder insulation, the entire structure of the standard-saving lining, Xiaoyan furnace heating elements used coarse diameter 0Cr25Al5 high temperature resistance wire spiral in accordance with the temperature around 10% Busi, rehoused in the silk lining of the dormant brick, built brick by wire in front of the Bending Upwards of 20 brick-swap silk, silk difficult to swap out resistance. Crucibles use of heat-resistant stainless steel welding materials, and the X-ray detection factory. As Austempered salt furnace used in the layout Crucibles made of heat-resistant stainless steel cold-speed packet four in the furnace and install electrical reciprocating Swing Rack, the workpiece on the rack, in the medium Xiaoyan reciprocating movement to temperature, isothermal quenching effect. Another stainless steel with compressed air into the trachea, in the bottom of the porous Crucibles jet pipeline, Xiaoyan of rapid cycling tossed to any point in Qiaoyan of uniform temperature, the furnace through Xiaoyan automatic temperature control, Cabinet with use, the workpiece can quenching in a very short time, such as rapid cooling to the temperature quenching process required by any automatic temperature thermostat.4.Three submerged electrode bath heatersDM series of three submerged electrodes of the furnace bath national standards for energy-saving cycle electrode bath furnace for melting the salt in the liquid or mixed metal salt solution in the mechanical heating, for various heat treatment, such as: quenching annealing, tempering, normalizing, no oxidation, such as heating and carburizing use. This series is divided into low-temperature furnace electrodes bath, the temperature and heat three, the temperature was 150-550 ,550-1000 ,1000-1350 .DM Three-phase embedded electrodes of the furnace bath rectangular structure, the cover of the angle and a plate welding, putting plate made of interior, the interior is the standard by vertical slabs and slabs of salt slot, interior is used mainly to prevent infiltration of the insulation layer and molten salt tank, the tank when the salt damage to facilitate hanging out repairs. Electrode bath heaters and interior build a furnace insulation between the shell and fill insulation brick powder, salt from the electrode is inserted into the side slot at the bottom, a contact Bath Salt, and the remaining three face buried in the firebrick in the above structure to extend the life of electrodes. The electrodes 50 mm from the bottom, this can be avoided due to slag deposition short circuit caused the two electrodes, in the interior of the outside have cooled electrode sets, molten salt field along the electrode outflow, the water-cooled package that met solidification, this can be avoided Leakage salt. Three submerged electrode bath salts furnace used for heating agent, according to a variety of temperature, the choice of different ingredients mixed salt or salt, the surface of the molten salt is not conductive ago, bath heaters must be used when using a Fixed electrode melting, due to the current through the conductive heat continuously dissolved salt, it dissolves state can be maintained, because of electrodes in the role of the electromagnetic force, through natural convection and electromagnetic stirring constantly cycle molten salt, it can be rapid and uniform heating workpiece. Oven side with the exhaust hood, and the workshop of the exhaust pipe connected electrode bath furnace excluded from the harmful gases. Furnace electrode bath with matching supply with electric control cabinet to control electrode bath furnace temperature, temperature control cabinet with instructions by the measurement of temperature control, and the compensation wire submerged salt bath thermocouples connected, instructions can be recorded and automatically adjust temperature.5.Crucibles bath heatersCrucibles bath in this series primarily for spare parts furnace metal parts quenching,cyanide,such as annealing and tempering heat treatment,especially in fasteners,heat treatmeat standard parts.RYG2 series of energy-saving stoves from the crucible furnace shell bath, lining, crucible, the crucible lid on the heating element and hood components. Furnace shell from a welding steel and steel cylindrical furnace from 0.6 g/cm3 super energy-saving light beads piled firebrick, uniform wall surrounding the installation heating elements, Crucibles bath furnace hearth furnace and inter-filled silicone shell Acid mat aluminum powder insulation and expansion of insulation materials, heat-resistant steel furnace built release Crucible, used to hold salt solution, Crucible covered by the two semicircular composition, rotation can be flexible, covered with two holes for hanging the support shaft workpiece. Crucibles bath heaters equipped with circular upper furnace shell on the hood, the top exhaust port will be able to ventilation systems to remove harmful gases, on the lower part of a two enclosures can be rotated Zhaomen and observation hole. In the furnace shell in front of a drainage hole, in order to remove the furnace, regular milk, as a result of corrosion due to leaky crucible of the salt solution, which I can also outflow Crucibles bath heaters, and to protect the heating element will not be lining damaged. Work, in the drainage extraoral insert point silicate fiber cotton, and to prevent cold air from entering the furnace temperature and impact.6.Crucibles bath laboratory furnaceCrucibles bath main laboratory for laboratory furnace metal parts for various quenching, cyanide, such as annealing and tempering heat treatment, especially in fasteners, heat treatment standard parts.The laboratory Crucibles bath furnace structure, the furnace shell made of welded steel plate and steel, aluminum furnace from high energy-saving refractory made furnace used in the furnace shell of silicate fiber insulation, resistance wire heating elements used 0 Cr25Al5 , made around the furnace in the spiral arrangement of the string around the wire hole. Crucibles placed in the furnace of stainless steel, used to hold salt solution. Lid using manual clamshell.7.Quench tankZC Series quenching tank,mainly for electric Well,the electric car,box-type furnace,molten salt,and other electric furnace heated hardening of the workpiece use.Quench tank using steel structure, square, rectangular, circular, quenching tank, the installation of a heating pipe, tank, installed pump, stainless steel plate heat exchanger, automatic temperature control thermostat oil counters, the working principle: When frequent workpiece quench tank into the quenching oil temperature rise caused when pump started working, the temperature quenching tank pumping oil into the stainless steel plate heat exchanger, and then automatically connected to cooling water circulating through the multi-plate heat exchanger plate stainless steel shafts a heat exchanger, the cooling return to the quenching oil quenching tank, so reciprocating cycle to quench tank cooling purposes. When the temperature is low, the electric heater automatically connected heating oil quenching, after cold automatic temperature control, temperature quenching oil temperature in the process of quenching temperature.中文译文1.箱式低熔点玻璃熔封炉箱式低熔点玻璃熔封炉主要用于电子工业、低熔点玻璃熔封。也可用于模具、各种机械零件回火；铝合金压铸件固熔时效；粉末冶金粉料高温烘干。采用微电脑程序自动控温，实现烘干工艺曲线自动化。也可用于模具、各种机械零件回火；铝合金压铸件固熔时效；粉末冶金粉料高温烘干。采用微电脑程序自动控温，实现烘干工艺曲线自动化。2.箱式有机培膜焙烧炉箱式有机培膜焙烧炉主要用于电子工业、低熔点玻璃熔封也可用于模具、各种机械零件回火；铝合金压铸件固熔时效；粉末冶金粉料高温烘干。3.摆动式等温淬火硝盐炉采用工件摆动式等温淬火工艺制造的节能耐用型工业电炉。熔融液体介质加热工件、如硝盐类、碱类、油类及低熔点金属及合金等，硝盐炉加热工件，加热速度较快，氧化脱碳较轻，便于局部淬火，等温淬火及多种化学热处理。尤其适用于铁路机车、球磨机衬板、钢球、破碎机锤头奥-贝体耐磨材料等温淬火。尤其适用于铁路机车、球磨机衬板、钢球、破碎机锤头奥-贝体耐磨材料等温淬火。由炉体、不锈钢坩锅、电动往复式摆动料架、不锈钢速冷包、电热元件和自动控温柜组成，可以使用不同溶剂，进行零件淬火、回火加热、等温淬火冷却，液体化学热处理等多种工艺，炉体由型钢和钢板焊接而成，炉面采用=14mm板制成，硝盐炉衬采用超轻质高强度0.6g/cm3微珠耐火砖， 夹层置硅酸铝纤维，炉衬与炉壳间填充保温膨胀保温粉，整个结构为标准型节能炉衬，硝盐炉的发热元件采用较粗直径0Cr25Al5高温电阻丝绕成螺旋状按照 均温布丝法，安置在炉衬的搁丝砖上，搁丝砖采用前部上翘20防掉丝砖，电阻丝不易掉出。坩锅采用耐热不锈钢板密焊制成，并经过本厂X光探伤。作为等温淬 火盐炉使用时在坩锅内布置耐热不锈钢制成的速冷包四个，并在炉体上安装有电动往复摆动式料架，工件放在料架中，在硝盐液中往复运动，达到均温、等温淬火效 果。另配备压缩空气不锈钢进气管，在坩锅内底部组成多孔喷流管道，使硝盐液快速循环翻腾，达到硝盐液内任何一点温度均匀一致，通过硝盐炉自动控温电柜的配 合使用，可使淬火工件在很短时间内快速冷却到等温淬火所需要的任何工艺温度内自动恒温。坩锅采用耐热不锈钢板密焊制成，并经过本厂X光探伤。作为等温淬火盐炉使用时在坩锅内布置耐热不锈钢制成的速冷包四个，并在炉体上安装有电动往复摆动式料架，工件放在料架中，在硝盐液中往复运动，达到均温、等温淬火效果。另配备压缩空气不锈钢进气管，在坩锅内底部组成多孔喷流管道，使硝盐液快速循环翻腾，达到硝盐液内任何一点温度均匀一致，通过硝盐炉自动控温电柜的配合使用，可使淬火工件在很短时间内快速冷却到等温淬火所需要的任何工艺温度内自动恒温。4.三项埋入式电极盐浴炉在熔化了的盐液或混合盐液中加热金属机件，以进行各种热处理，例如：淬火、退火、回 火、正火、无氧化加热及渗碳等之用。本系列电极盐浴炉分为低温、中温及高温三类，其工作温度分别为150-550、550-1000、1000- 1350。本系列电极盐浴炉分为低温、中温及高温三类，其工作温度分别为150-550、550-1000、1000-1350。DM型三相埋入电极盐浴炉系长方形结构，外壳由角钢及钢板焊成，内放钢板制成的内胆，内胆中是采用立砖及标准砖组成的盐槽，内胆主要是用于防止熔盐渗入保 温层及盐槽外，当盐槽损坏时便于吊出修理。电极盐浴炉的内胆与炉壳之间砌有保温砖及填满保温粉，电极是从盐槽底部侧面插入，一个面接触浴盐，其余三个面埋 在耐火砖中，以上结构达到延长电极使用寿命。由于电极离槽底50毫米，这样可避免由于炉渣沉积而造成两电极短路，在内胆外面的电极有水冷套，熔盐沿着电极 向外流出时，碰到水冷套即凝固，这样可以避免漏盐。三项埋入式电极盐浴炉采用盐类作加热剂，根据不同的工作温度，可选用不同成份的盐或混合盐，盐在熔化前 是不导电的，因此盐浴炉使用时必须使用起动电极溶化，由于电流通过导电的溶盐不断产生热量，故可保持溶化状态，因电极在电磁力的作用下，通过自然对流和电 磁搅拌而使熔盐不断循环，故可迅速和均匀的加热工件。炉侧装有排气罩，与车间的排汽管相连接，排除电极盐浴炉所产生的有害气体。与电极盐浴炉配套供应的有 电炉控制柜，以控制电极盐浴炉的温度，控制柜上装有指示温度用的测量控温计，经补偿导线与浸入盐槽中的热电偶相连接，可指示记录及自动调节温度。电极盐浴炉的内胆与炉壳之间砌有保温砖及填满保温粉，电极是从盐槽底部侧面插入，一个面接触浴盐，其余三个面埋在耐火砖中，以上结构达到延长电极使用寿命。由于电极离槽底50毫米，这样可避免由于炉渣沉积而造成两电极短路，在内胆外面的电极有水冷套，熔盐沿着电极向外流出时，碰到水冷套即凝固，这样可以避免漏盐。三项埋入式电极盐浴炉采用盐类作加热剂，根据不同的工作温度，可选用不同成份的盐或混合盐，盐在熔化前是不导电的，因此盐浴炉使用时必须使用起动电极溶化，由于电流通过导电的溶盐不断产生热量，故可保持溶化状态，因电极在电磁力的作用下，通过自然对流和电磁搅拌而使熔盐不断循环，故可迅速和均匀的加热工件。炉侧装有排气罩，与车间的排汽管相连接，排除电极盐浴炉所产生的有害气体。与电极盐浴炉配套供应的有电炉控制柜，以控制电极盐浴炉的温度，控制柜上