BPC 10.0 EMP Aster Group 10 Report Training - 09E Formatting

Aster 10.0 -Report TrainingExercises09 FormattingExercise 9.1.1 Formatting All SectionsTasks: Create a report with Entity (Member and All below RMH, HHS, and RSH (Descriptions only) in the rows and Time in the Columns (Four Quarters of 2011 with 2011.Total at the end (Descriptions only). Leave one space in between the column axis and the data range. Place Category in the page axis. Start the data in cell B8 and the page axis in A3. Apply formatting as defined belowObjectives: Understand how to apply formatting worksheet to a reportThe EPM Context should be set to the following members:Hint: Before formatting, make sure “Show Gridlines” is uncheckedBuild the report:1. Create a report with Entity (Member and Descendants below RMH-Rolling Meadow Hospital, RSH-River Stream Hospital, and HHS-Home Health System (Descriptions only) in the rows and Time in the Columns (Four Quarters of 2011 with 2011.Total at the end (Descriptions only).2. Leave one space in between the column axis and the data range.3. Place Category in the page axis.4. Start the data in cell B8 and the page axis in A3.The report should look similar to this:Enable formatting by clicking the View Formats button in the EPM Menu and activate the following in the created formatting sheet:1. Make the default for rows a light gray background, dotted edge, Calibri font, insert commas, and remove zeros. Make sure the background is white for the header.2. Do the same for the column default for data (Hierarchy level), but also add a blue background and white font for the header. Center and bold the header.3. In the Dimension Member/Property Formatting section copy the default format from the rows and add a bold font to the data and the header whenever the entity property “CALC” = Y. Hint: (see picture). Make sure to check the box in the header of the section to enable it.4. In the row and column banding section, add a darker gray background for odd rows. Hint: You may need to change the Use setting to only include one option. 5. Finally, give a dark gray background for your page axis with right side and bottom outline, italics and centered:6. Go back to your report and refresh.If youre having trouble seeing the formatting, make sure it is enabled in the options tab (or sheet options) and ensure all of your check marks are checked for the formatting you want to use.Your Final report should look like this:Exercise 9.2.1 Formatting All SectionsTasks: Apply what you know to build the below report. Try to do it without looking at the answer key.Objectives: Apply learned skills in building and formatting reports.Start by building this report:Apply the format as shown below to your report.Hint: You will apply formatting for the Account Property HLEVEL=1 & HLEVEL=2. (HLEVEL stands for hierarchy level.)Answer Key:Report: Rows Account, Net Income (Member and Descendants to 3 levels); Column Time 2011.Total (Member and Children); Leave a blank row between header and dataP