HACMP安装、配置-施实全过程.doc

HACMP安装、配置，施实全过程环境：两台P630：P630_1，P630_2磁盘陈列：7133-D40共享卷组：oravg1、在两台计算机上设置IP地址（1）在p630_1机上：A.配置第一块boot网卡-#smitty-Communications Applications and Services-TCP/IP-Minimum Configuration & Startupselect en2* HOSTNAME p630_1* Internet ADDRESS (dotted decimal) 10.10.9.1Network MASK (dotted decimal) 255.255.255.0* Network INTERFACE en1NAMESERVERInternet ADDRESS (dotted decimal) DOMAIN Name Default GATEWAY Address B.配置第二块boot网卡-#smitty-Communications Applications and Services-TCP/IP-Minimum Configuration & Startupselect en1* HOSTNAME p630_1* Internet ADDRESS (dotted decimal) 10.10.10.1Network MASK (dotted decimal) 255.255.255.0* Network INTERFACE en3NAMESERVERInternet ADDRESS (dotted decimal) DOMAIN Name Default GATEWAY Address （2）在p630_2机上：A.配置第一块boot网卡-#smitty-Communications Applications and Services-TCP/IP-Minimum Configuration & Startupselect en2* HOSTNAME p630_2* Internet ADDRESS (dotted decimal) 10.10.9.2Network MASK (dotted decimal) 255.255.255.0* Network INTERFACE en1NAMESERVERInternet ADDRESS (dotted decimal) DOMAIN Name Default GATEWAY Address B.配置第二块boot网卡-#smitty-Communications Applications and Services-TCP/IP-Minimum Configuration & Startupselect en1* HOSTNAME p630_2* Internet ADDRESS (dotted decimal) 10.10.10.2Network MASK (dotted decimal) 255.255.255.0* Network INTERFACE en3NAMESERVERInternet ADDRESS (dotted decimal) DOMAIN Name Default GATEWAY Address 2、修改/etc/hosts文件，内容如下：127.0.0.1 loopback localhost p630_110.10.9.1 boot_11 p630_110.10.10.1 boot_12 p630_1192.168.1.1 service110.10.9.2 boot_21 p630_210.10.10.2 boot_22 p630_2192.168.1.2 service23、在p630_1上建立共享卷组建立oravg共享卷组-#smitty-System Storage Management (Phisical & Logical Storage)-Logical Volume Manager-Volume Groups-Add a Volume GroupVOLUME GROUP name oravgPhysical partition SIZE in megabytes 128* PHYSICAL VOLUME names hdisk2Activate volume group AUTOMATICALLY noat system restart?Volume Group MAJOR NUMBER Create VG concurrent Capable? yesAuto-varyon in Concurrent Mode? no4、在p630_2上import共享卷组（1）import oravg共享卷组-#smitty-System Storage Management (Phisical & Logical Storage)-Logical Volume Manager-Volume Groups-Import a Volume GroupVOLUME GROUP name oravg* PHYSICAL VOLUME name hdisk2Volume Group MAJOR NUMBER Make this VG Concurrent Capable noMake default varyon of VG Concurrent? no（2）修改oravg共享卷组属性-#smitty-System Storage Management (Phisical & Logical Storage)-Logical Volume Manager-Volume Groups-Set Characteristics of a Volume Group-Change a Volume Groupselect * VOLUME GROUP name oravgVOLUME GROUP name oravg* ACTIVATE volume group AUTOMATICALLY noat system restart?* A QUORUM of disks required to keep the volume yesgroup on-line?Convert this VG to Concurrent Capable? no* Autovaryon VG in Concurrent Mode? no5、在p630_1和p630_2上配置非TCP/IP网络-#smitty-Devices-TTY-Add a TTYselect tty rs232 Asynchronous TerminalTTY type ttyTTY interface rs232Description Terminal asynchroneParent adapter sa3* PORT number 0BAUD rate 9600PARITY noneBITS per characteNumber of STOP BITS 1TERMINAL type dumbSTATE to be configured at boot time available.Enable LOGIN disable用Serial to Serial Cable连接一号机和二号机的COM3,作为HACMP的心跳线测试心跳线:1)在p630_1机上执行: cat /dev/tty03)在p630_1上若显示出p630_2的/etc/hosts文件内容,说明心跳线配置正确6、建立应用服务器启动脚本在/etc/hascript下分别建立dbstart.sh, dbstop.sh,然后修改文件属性为755:#chomd 755 *7、HACMP的设置（1）定义CLUSTER-Initialization and Standard Configuration-Add Nodes to an HACMP ClusterAdd/Change/Show an HACMP Cluster输入字段* Cluster Name wlyNOTE: HACMP must be RESTARTEDon all nodes in order for change to take effect（2）定义p630_1节点- Extended Configuration- Extended Topology Configuration-Configure HACMP Nodes- Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster输入字段* Node Name p630_1Communication Path to Node +（2）定义p630_2节点- Extended Configuration- Extended Topology Configuration-Configure HACMP Nodes- Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster输入字段* Node Name p630_1Communication Path to Node +(3)定义网络A.定义IP网络- Extended Configuration-Extended Topology Configuration-Configure HACMP Networks- Add a Network to the HACMP ClusterAdd an IP-Based Network to the HACMP Cluster输入字段* Network Name net_ether_01* Network Type ether* Netmask 255.255.255.0 +* Enable IP Address Takeover via IP Aliases Yes +IP Address Offset for Heartbeating over IP Aliases B.定义非IP网络- Extended Configuration-Extended Topology Configuration-Configure HACMP Networks- Add a Network to the HACMP Cluster选择# Pre-defined Serial Device Types中的rs232Add a Serial Network to the HACMP Cluster输入字段* Network Name net_rs232_01* Network Type rs232(4)定义网络接口A.定义IP网络接口定义Boot_11接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Interfaces选择net_ether_01 (0.0.0.0/0)Add a Communication Interface输入字段* IP Label/Address boot_11 +* Network Type ether* Network Name net_ether_01* Node Name p630_1 +Network Interface 定义Boot_12接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Interfaces选择net_ether_01 (0.0.0.0/0)Add a Communication Interface输入字段* IP Label/Address boot_12 +* Network Type ether* Network Name net_ether_01* Node Name p630_1 +Network Interface 定义boot_21接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Interfaces选择net_ether_01 (0.0.0.0/0)Add a Communication Interface输入字段* IP Label/Address boot_21 +* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network Interface 定义boot_22接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Interfaces选择net_ether_01 (0.0.0.0/0)Add a Communication Interface输入字段* IP Label/Address boot_22 +* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network Interface B.定义非IP网络接口定义p630_1tty接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Device选择net_rs232_01Add a Communication Device输入字段* Device Name p630_1tty* Network Type rs232* Network Name net_rs232_01* Device Path /dev/tty0* Node Name p630_1定义p630_2tty接口:- Extended Configuration- Extended Topology Configuration-Configure HACMP Communication Interfaces/Devices- Add Communication Interfaces/Devices选择Add Pre-defined Communication Interfaces and Devices选择Communication Device选择net_rs232_01Add a Communication Device输入字段* Device Name p630_2tty* Network Type rs232* Network Name net_rs232_01* Device Path /dev/tty0* Node Name p630_2(5)定义应用服务器定义wlyapp应用服务器:-Initialization and Standard Configuration-Configure Application Servers-Add an Application ServerAdd Application Server输入字段* Server Name wlyapp* Start Script /etc/hascript/dbstart.sh* Stop Script /etc/hascript/dbstop.sh(6)定义共享资源组定义wlyres资源组-Initialization and Standard Configuration-Configure HACMP Resource Group-Add a Resource Group选择CascadingAdd a Resource Group with a Cascading Management Policy (standard)输入字段* Resource Group Name wlyres*Participating Node Names (Default Node Priority) p630_1 p630_2 +(7)修改资源组属性修改wlyres资源组属性:-Initialization and Standard Configuration-Configure HACMP Resource Group- Change/Show Resources for a Cascading Resource Group(standard)Change/Show Resources for a Cascading Resource Group输入字段Resource Group Name wlyresParticipating Node Names (Default Node Priority) p630_2 p630_1* Service IP Labels/Addresses +Volume Groups oravg +Filesystems (empty is ALL for VGs specified) +Application Servers wlyapp +(8)定义Service IP定义p630_1的service IP地址:-Initialization and Standard Configuration-Configure Resources to Make Highly Available-Configure Service IP Labeles/Addresses-Add a service IP