RedBack800组播以及QOS配置模板.doc

RedBackSE800组播以及Qos配置模板本人最近在做IPTV和Qos方面的测试，故将成果贴出，与大家共享context iptv!no ip domain-lookup!interface pool1 ip address y.y.y.y/24!interface togsr ip address x.x.x.x/30 pim sparse-modeno logging console!router ospfxxx router-idx.x.x.x area 0.0.0.0 interface togsr authentication none redistribute connected!subscriber default ip address pool ip multicast receive permit dns primaryx.x.x.x dns secondary x.x.x.x!subscriber name iptvtest password testsubscriber name test password test ip multicast send permit ip multicast receive permit!pim rp-address x.x.x.x! * End Context *!全局配置下:qos policy 10M meteringrate 10240 burst 2000000!qos policy 1M meteringrate 1024 burst 100000!qos policy 2M meteringrate 2048 burst 200000!qos policy 3M meteringrate 3072 burst 200000!qos policy 4M meteringrate 4096 burst 200000!qos policy 5Mmark meteringrate 5000 burst 200000 conform mark dscp cs6 /DSCP转802.1P!qos policy 6M meteringrate 6144 burst 200000!system clock timezone CST 8 0 local!dot1q profile mark1p propagate qos to ethernet propagate qos from ethernet!card ge-4-port 5!port ethernet 5/1no auto-negotiateno shutdownencapsulation dot1qdot1q pvc 151 description to xxx bind interface to-xxx-gsr-2nd localdot1q pvc 152 description togsr-for-iptv bind interface togsr iptv!pppoe services all-domainspppoe service-name accept-allpppoe always-send-padt!end接口下:port ethernet 12/11medium speed 100 duplex fullno shutdownencapsulation dot1qdot1q pvc 152 encapsulation 1qtunnel dot1q pvc 152 profile mark1p qos policy metering 5Mmark bind interface pool1 iptv ip hosty.y.y.2 00:01:02:03:04:00 /为测试机器配置静态地址!需要注意的是在SE800中所有的组播配置全部应该在同一个context下配置完成，也就是说这个